I was wondering if anyone else was in need of a mold to cast for the 32acp. It wouldn't hurt that this mold also does double duty as an ultra light 30 cal mold.
Lakehouse has said if there is enough interest he could Honcho the buy. Kevin
I was wondering if anyone else was in need of a mold to cast for the 32acp. It wouldn't hurt that this mold also does double duty as an ultra light 30 cal mold.
Lakehouse has said if there is enough interest he could Honcho the buy. Kevin
Wolf it looks like you and i are the only ones.
Oh well. Can always get something later on when I really have the time.
I use the Lee 311-100-2R and the 311-90-SWC sizing and lubing in an RCBS luber/sizer for .32ACP and they work very well in three different pistols. Either can be sized to .30 caliber but I don't run lead bullets in .30 carbine nor would I try them in .308 or 30-06 as I simply do not use reduced loads in rifles.
Consider Accurate 31-081H, works great in most .32 ACP with 2 grains of Bullseye or TiteGroup.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
I have gotten great results from the Lee 93gr RN 6-cav.
I powder coat them, size .314” for .32 revolvers and now, .30SC.
I size .311” for the .30Carbine and .32acp’s No leading in the .30Carb. Shoot better than jacketed in my 1943 Saginaw S.G. I use 12.0gr of #2400 in Carbine, 1.8gr of BullsEye in .32acp.
I have a Lyman.311252 but seldom use it now that I have the 6cav Lee.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |