ADvertise hereTitan ReloadingInline FabricationRotoMetals2
MidSouth Shooters SupplyRepackboxLee PrecisionReloading UK

Results 1 to 3 of 3

Thread: Which would you buy and why? NOE 360-172-SWC or 360-176-SWC ?

  1. #1
    Boolit Buddy maglvr's Avatar
    Join Date
    Jun 2011
    Posts
    303

    Which would you buy and why? NOE 360-172-SWC or 360-176-SWC ?

    Ok this is my last question on these two, I swear
    Which of these 2 great looking molds would you buy, and why?
    Many thanks
    MagLvr
    The .357 Magnum......
    1935
    Major Douglas Wesson, using factory loads, which were a 158 gr. soft lead bullet, traveling 1515 fps, from an 8 3/4" barreled S&W, producing 812 ft. lbs of muzzle energy.
    Antelope - 200 yards (2 shots)
    Elk - 130 yards (1 shot)
    Moose - 100 yards (1 shot)
    Grizzly Bear - 135 yards (1 shot).

    It kind of makes one wonder, why today, it will bounce off anything bigger than a rabbit

  2. #2
    Boolit Bub
    Join Date
    Jan 2021
    Posts
    43
    I doubt you'd notice any real difference between the two. The 360-176-SWC is the older original 358429 Lyman mould clone. It would be closer to what Major Wesson used when experimenting with the original 357 but the differences between these two moulds are pretty trivial.

  3. #3
    Boolit Grand Master
    rintinglen's Avatar
    Join Date
    Jul 2007
    Location
    Orange, VA NOW
    Posts
    5,212
    I would go with the 360-176, solely because of the slightly shorter crimp groove-to-nose length. In my model 28, that .009 difference matters. In my other .357's, not so much.
    _________________________________________________It's not that I can't spell: it is that I can't type.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check