I'm looking for a boolit mold for PP boolits for us in my 38/55.Where would be good place to find one?
Jon
I'm looking for a boolit mold for PP boolits for us in my 38/55.Where would be good place to find one?
Jon
[SIZE="4"][COLOR="Gray"]A Country Boy Can Survive
Jon[/COLOR][/SIZE]
http://kal.castpics.net/ for smooth sided bullet patched to bore diameter in a black powder load.
I like Lyman 375449 patched up to groove diameter in a smokeless load.
-ktw
There is a thread on MSN BPCR that might interest you. But make copies NOW of anything you will want in the future. Dan Theodore's posted pictures don't usually stay around very long.
http://groups.msn.com/BPCR/general.m...04246694877698
There are two designs shown, and some comments about making them into smooth-sided bullets.
CM
Retired...TWICE. Now just raisin' cows and livin' on borrowed time.
I know you mentioned a paper patch boolit mold, but I have gotten excellent results from patching both the standard grooved RCBS and Lyman .375 molds. The grooves give the patch something to hold onto and will still hold some lube. Bear in mind all of my 38-55 work has been in lever actions. Your purposes may be totally different.
Keith
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |