I have a ten bore double barrel Paradox Rifle. My former boolit supplier died, and his widow sold all of his stuff.
Any suggestions on a source for a quality mould? 20:1 alloy, boolit diameter is .7934" or so. About an ounce.
thanks,
Rich
I have a ten bore double barrel Paradox Rifle. My former boolit supplier died, and his widow sold all of his stuff.
Any suggestions on a source for a quality mould? 20:1 alloy, boolit diameter is .7934" or so. About an ounce.
thanks,
Rich
You're looking for a Special BP mould/guy with ball for 78-84 cal .
Goodsteel did some work with a cyl bore 10 ga .
For whatever it's worth a .690 in pure is right at 1-1/4 oz .
In the time of darkest defeat,our victory may be nearest. Wm. McKinley.
I was young and stupid then I'm older now. Me 1992 .
Richard Lee Hart 6/29/39-7/25/18
Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .
Not too big for these guys:
https://www.ballmoulds.com/?fbclid=I...OAR7Ar_sxbbIpk
I'm not sure what you mean by about an ounce. A .800" ball would weight about 800 grains. This mold from Accurate is about 990 grains.
https://www.accuratemolds.com/bullet...bullet=79-990P
Cast bullet Engineering here in Australia!
https://www.castbulletengineering.co...moulds/10-bore
Hold Still Varmint; while I plugs Yer!
A 10 Bore Parradox?!? We NEED Pics!
Yes, Good Steel got a round ball mold for his 24" barreled 10 ga double that I gave to him. I think he got the mold from some place in the UK.
I queried the net and found a Ten bore is 0.775 inches
These folks make round ball molds
Discussed back in 2015 https://castboolits.gunloads.com/sho...0Ga-slug-loads
Reduce the issue, ignore the drama
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |