Looking for a few 2 cavity Lyman molds, the slotted lock screw is preferred, condition is most important.
Lyman 2 Cavity
356402
358430 195gr PBRN
358242 120gr PBRN
358311
358495
311284
311334
311359
311413
311440
Also ISO a Lyman 413 top punch. Thanks!
Last edited by zarrinvz24; 05-09-2021 at 09:13 AM.
if you don't have any luck; i have a single cavity GC for $35.00 shipped.
oops. the single cavity is a 311413
I have a 2 cavity 311008 I'm not using.
Thanks but I'm really looking for rifle molds. Still looking, back to the top please.Originally Posted by ElCheapo
If you are just wanting to play around with some older designs, that is OK. But, if you are looking for best accuracy, 311334 (Krag bullet) and 311413 (Squibb bullet) are not a good use of your money. The 311334 is a true bore rider that requires a proper fit to give best accuracy. Mine casts .298-299 on the nose depending on the alloy and is really to small for best accuracy in most 30 cal rifles with a true .300 land diameter. 311413 is the Lyman version of the Squibb bullet which was made at one time by every mold maker. It does well at 1.6K fps velocity, but over that best accuracy is hard to find.
I know, I should mind my own business, but thought maybe you might find the above helpful. If not then just ignore the old busy body.
Disclaimer: The above is not holy writ. It is just my opinion based on my experience and knowledge. Your mileage may vary.
Still looking for the molds. BTT.
The search goes on, BTT.
I can help you with 356402 and 358311, both 2 cav.
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
I'd like to throw my hat in the ring- I have a 358311, double cavity with the slotted lock screw. If you aren't opposed I also have a NOE 311440, one hollow point and one solid, gas check mold. Dunno how set you are on the Lyman vs other brand. Both great molds that throw well-formed boolits.
Zingger
I have a few .30 cal molds at the house, i will take a look and see what I have that Im not using or plan to use.
Always do sober what you said you'd do drunk, that will teach you to keep your mouth shut!"
- Earnest Hemmingway
" I'd rather be lucky than good, GET SOME!" Mr. Revolver" - Jerry Miculek
I have a 358495 4 cavity Lyman I would sell. Not sure about the screw.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
