Lee PrecisionWidenersInline FabricationPBcastco
MidSouth Shooters SupplyTitan ReloadingLoad DataRotoMetals2
Repackbox Reloading Everything
Page 1 of 3 123 LastLast
Results 1 to 20 of 42

Thread: 1917 Enfield

  1. #1
    Boolit Buddy
    Join Date
    Dec 2011
    Posts
    219

    1917 Enfield

    What is a fair price for a 1917 Enfield that was bought new in the wrapper many years ago, fired less than fifty times, and then placed in a closet for decades?

    Thank you

  2. #2
    Boolit Grand Master



    M-Tecs's Avatar
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    9,441
    It depends on condition and if everything is matching. Collector grade have significant value but not so much for parts guns even if they are in very nice condition.

    Here's a nice one https://www.gunbroker.com/item/896743344
    Last edited by M-Tecs; 04-18-2021 at 04:33 AM.
    2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    "Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
    – Amber Veal

    "The Highest form of ignorance is when your reject something you don't know anything about".
    - Wayne Dyer

  3. #3
    Boolit Grand Master In Remembrance Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,725
    You haven't mentioned what version it is.
    I don't know about the US, but in Ausralia they are pretty common. Eddystones are like bottoms, everyone has one and they don't bring good dollars (even though they are perfectly serviceable), Remingtons are rarer, generally look a tiny bit nicer and bring better money and the Winchesters are the holy grail and rarely encountered. I have only ever seen two Winchesters over the years (I have been shooting M17s for 50 odd years), one was a rusty example that had been converted to a target rifle and the other was a sporterised sniper rifle which I gave to a mate who restored it back to original and found a correct scope for it.
    The odd thing is a lot of shooters turn their nose up at Eddystones, but they are also Remingtons, made in the old Locomotive factory in Eddystone.
    Last edited by Four Fingers of Death; 04-18-2021 at 05:54 AM.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  4. #4
    Boolit Master Shawlerbrook's Avatar
    Join Date
    Nov 2015
    Location
    Central NY
    Posts
    2,904
    I can tell you I used to buy and sell them for $100 to $300 in the early 90’s. Now you would be hard pressed to find one for less than $500. If yours is as described, matching and not an import, it is probably going for near four figures at a minimum.

  5. #5
    Banned
    Join Date
    Nov 2012
    Location
    Central Virginia
    Posts
    7,439
    For starters, I would be suspicious of a seller claiming he had a 1917 that was, "...bought new in the wrapper many years ago, fired less than fifty times,..". The odds of the description being accurate are slim.
    If it's a 1917 and not a Remington model 30, the only buyer that obtained a new one would have been the U.S. Government. After that, they were sold as surplus. So it may have been sold in a wrapper somewhere along its life, but it probably wasn't new when that happened.
    And a reported round count of less than 50 might be true for ONE of the previous owners of that rifle but not for the rifle itself.

    Putting that sales pitch aside; they are good rifles with strong actions. Many were shot with corrosive ammo. If cleaned properly after corrosive ammo is used, this is no problem. So close inspection of the bore is in order.

    As stated above, they were reasonably priced years ago and good values. In today's climate, even a bad one will go for several hundred dollars. If it is in excellent condition, not modified and matching parts - I would expect it to easily be in the four figures range and probably over $2K

    The statement that the rifle was purchased new in a wrapper many years ago is probably only true if the seller is referring the the U.S. government being that purchaser. If the seller is claiming HE purchased the rifle as a NEW rifle, I think you've got a used car salesman on your hand. Caveat Emptor

  6. #6
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,289
    Not a 1917 Enfield. It would either be a U.S. Rifle M1917 or a British rifle P14 (U.S. made). Neither were made for or by Enfield.
    Larry Gibson

    “Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
    ― Nikola Tesla

  7. #7
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    4,192
    Local shop has a VERY clean Winchester with RIA rebuild cartouches on the stock for $1600. It and the three similarly clean 1903 Springfields marked between $1800 and $2400 that it came in with on consignment have all been sitting on the racks for several weeks. Nobody's snapping them up at those prices - even in the current climate.

    I bought a very nice Remington a bit over a year ago off a friend for $700, which we both thought was fair.

    If you have a true original time capsule gun, you could probably find folks willing to pay north of $2000, but be ready to do the homework necessary to determine that it's not a refurb. Most U.S. surplus rifles are Frankenguns to some degree.
    WWJMBD?

    In the Land of Oz, we cast with wheel weight and 2% Tin, Man.

  8. #8
    Boolit Master
    Join Date
    Feb 2008
    Location
    Eureka MT
    Posts
    2,512
    My dad bought one in 1936 or 37 when he was in the army. He said NRA was selling them for $7.50 for a rebuilt or $8 something for a new one. He bought a rebuilt one but said when it arrived it appeared to be new with a used stock. He cleaned the cosmoline from it and chambered a palma match round in it. When he ejected the round the bullet had stuck into the rifling enough to seperate it from the case. He used it for the rest of his life as his hunting rifle. The only mod he made was to remove the stacking swivel as it rattled. I don't know or care what it's worth as it won't be sold unless my son sells it after I'm gone.

    The barrel is marked 1918 and it is an Eggystone.

  9. #9
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    2,110
    There is a very considerable difference in desirability between an Eddystone and a Winchester,and price reflects this.......most who want an M17 already have an Eddystone,and just as many also want a Winchester,but havent found one.......I think one reason (apart from production) is that back in the day ,Winchesters were preferentially sporterised......then of course there is the Eddystone stigma of cracked recievers.

  10. #10
    Boolit Master Bad Ass Wallace's Avatar
    Join Date
    May 2005
    Location
    Australia
    Posts
    1,957
    It has taken me over 45 years to aquire just 4 Winchesters both M17 and much rarer P14 in original 303 British. Then came the search for Parker-Hale 5B range sights.

    They are not making any more so the price escalates with each passing year. A Good sample Winchester will fetch $AU1000-1200 and the PH sight another $AU500-600

    Hold Still Varmint; while I plugs Yer!

  11. #11
    Boolit Grand Master In Remembrance Four Fingers of Death's Avatar
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    6,725
    As well as a better finish on the Winchesters, they only made a fraction of the numbers that Remington and Eddystone made. I have the figures somewhere, the Eddystones were the most prolific by a large margin from memory.
    I think the Eddystone cracking receivers is a problem, but not as big a problem as made out, I have seen squillions of Eddystones converted to hunting and (mostly) target rifles over the years.
    I have tw0 Eddystones converted to 7.62 target rifles, a mintish Eddystone P14 with a fat boy stock (and with both long range volley sights), a Remington M17 in good condition, a Remington M17 with a Parker Sight (a bit smaller that the Parker Sight shown above) and a restocked M17 Eddystone sporter.
    They all shoot well.
    At those prices, I might start thinning the herd.
    "I'll help you down the trail and proud to!" Rooster Cogburn.

    "Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."

    SASS Life Member No 82047

    http://s89.photobucket.com/albums/k228/4fingermick/

    Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
    Sniper to Psycholigist; 'Recoil Ma'am.'

    From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."

  12. #12
    Boolit Grand Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    USA
    Posts
    5,491
    I traded for a Winchester the winter before last. I gave for it $40, a pair of Warne scope rings, and a little gun smithing. I mounted a scope, lightened a trigger, polished a bolt, and sighted the gun in. The 1917 had a sporter stock and timney trigger. I did the sporterizing 25 years ago for the guy. The original Stock was broke on half and tossed. I found a stock shoved in my rafters of a house I bought at the time. I cut it down per my buddies request and glass bedded it. I had the gun shooting half inch 100 yard groups with 125 grain Nosler ballistic tips. This a was around 95’. By the time I sold the sporter stock and timney trigger I bought a Winchester stock off eBay for not much more. The only things not marked “W” if I remember is the trigger plate and maybe the bolt? The rest is all Winchester...and it’s a shooter! I did some old posts here about it shooting all in the same hole at 100 yards the rest time I had it out to the range. I wouldn’t get rid of of it. There is a Winchester on the rack at my LGS for $1200. It’s been there for 2 years now with no buyers. IMO those guns are like 57’ Chevys at a car show. Everyone likes to look at them but no one buys them. IMO it’s worth what someone is willing to pay. Throw it up on GB. Do a penny auction and see what it brings. My guess it will go for $600 to $800 in the “eBay” of gun sales sites where people overpay for things.
    Last edited by Tripplebeards; 04-19-2021 at 10:28 AM.

  13. #13
    Boolit Buddy
    Join Date
    Dec 2011
    Posts
    219
    Quote Originally Posted by Larry Gibson View Post
    Not a 1917 Enfield. It would either be a U.S. Rifle M1917 or a British rifle P14 (U.S. made). Neither were made for or by Enfield.
    Thank you Larry. I think that is a U.S. Rifle M1917. My friend is nearly 80 now and he bought it when he was a teenager growing up on a farm at the hardware store. He says that it was new in a wrapper and is a Remington. My guess is that it must have been a refurbished one that looked new. He bought two boxes of ammo for it that he never finished.

    It was never cleaned after shooting and has been in a closet ever since.

  14. #14
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    4,192
    Quote Originally Posted by rjathon View Post
    It was never cleaned after shooting and has been in a closet ever since.
    Then you need to take a deep breath and hope when you look down the barrel. Your friend was a teenager in the late '50's and early '60's. USGI .30-06 stopped being corrosive primed around 1953, but there was a lot of it out there. With luck, it's only plated with copper. I'll be holding my breath along with you.
    WWJMBD?

    In the Land of Oz, we cast with wheel weight and 2% Tin, Man.

  15. #15
    Boolit Buddy
    Join Date
    Dec 2011
    Posts
    219
    Quote Originally Posted by Bigslug View Post
    Then you need to take a deep breath and hope when you look down the barrel. Your friend was a teenager in the late '50's and early '60's. USGI .30-06 stopped being corrosive primed around 1953, but there was a lot of it out there. With luck, it's only plated with copper. I'll be holding my breath along with you.
    He said that is ammo was lead tipped commercial. One box was 150 gr and one was 220 gr. He remembered that the 220 seemed to kick harder.

  16. #16
    Banned
    Join Date
    Nov 2012
    Location
    Central Virginia
    Posts
    7,439
    I don't wish to be negative here but you need to go into this with both eyes wide open.

    As Bigslug correctly points out, your friend would have been 19 or 20 years old in 1961. So if he purchased that rifle in his late teens, we're looking at late 1950's or early 1960's; that rifle would have been around 40 years old at that point.
    A rifle of that type sold in a hardware store circa 1960 could have come from several sources. It could have been CMP rifle that was re-sold, it could have been a surplus rifle from one of the larger distributors of the day, It could have been a rifle that maybe didn't make it back into an armory, it could have been a re-import into America, it's impossible to say with the current information.

    Even if your friend didn't shoot corrosive ammo in the rifle, that's no guarantee that the bore was clean and bright when he got it.
    So take a really good look at that rifle.

    Now, that doesn't mean you should run away, it just means you need to make an informed decision.
    Look at the markings, are they correct? Do they match? Look at the bore, carefully. Can you take the barreled action out of the stock? Has it been re-finished? Has it been re-barreled? TAKE YOUR TIME.

    Since the story has already changed once ("I bought it new in the wrapper" verses "I bought it in a hardware store circa 1960"), I would consider any history about that rifle to be a bit dubious. Not because your friend is being less than truthful but because his memory may be a little fuzzy.

    Look at the rifle and let the rifle tell you its history.
    Last edited by Petrol & Powder; 04-20-2021 at 04:18 PM.

  17. #17
    Boolit Master
    Join Date
    Aug 2006
    Posts
    551
    I bought a P17 Eddystone from CMP that has 95%+ finish and 0.5 TE and 0.5ME for $750 a little over a year ago.
    I bought it for a “shooter”, not collector.
    I haven’t shot any match am through it, only ball equivalent. It’s 2moa or under.
    It’s an 11lb BRUTE! My 1943 03A3 is a svelte wand next to it.
    I know now why in WWII, my dad traded his M2 Thompson for a 03A3!
    22lbs vs 8.5lds. He was 5’6” 145lbs, MP. Cycled out an E8.
    Never fired a shot according to uncles. Carried two 5shot strippers the entire war! Never even loaded the gun according to him. Escorted material or prisoners.

  18. #18
    Boolit Buddy
    Join Date
    Dec 2011
    Posts
    219
    My buddy returned with the rifle.

    The rifle is a U.S. MODEL OF 1917. The serial number under 100,000. The barrel is marked W 11-17 and has five grooves. After cleaning the bore is bright and shiny and the rifling is excellent. The stock is in great shape. He bought it in the 1960’s at the local hardware store he thinks for ~ $25. It was in cosmoline and appeared brand new, to him, at that time. He bought a box of 220 gr bullets, with which he shot a deer, and years later a box of 150 gr bullets and he didn’t finish either box. It has been in a closet for decades. The finish is beautiful.

    The apearance of the rifle is consistent with his story, and he is a straight shooter.

  19. #19
    Boolit Master Jim22's Avatar
    Join Date
    Oct 2020
    Location
    Eastern Washington
    Posts
    589
    I have owned a couple of P17's. The first was marked Eddystone. The second Winchester. There was some discussion about the Eddystone rifles back in the sixties having uneven heat treeating on the actions. A few were said to be too hard and thus brittle. I never had a problem with mine. Rechambered it to .30-06 Ackley Improved and killed game with it. In both cases the best thing I did was to put an aftermarket trigger in them. Dayton-Traister if I remember right. The 'Cock on closing' feature made them a little slower for backup shots but not much.

    Jim

  20. #20
    Moderator


    Winger Ed.'s Avatar
    Join Date
    May 2007
    Location
    Just outside Gun Barrel City, Texas
    Posts
    9,430
    Quote Originally Posted by Jim22 View Post
    The 'Cock on closing' feature made them a little slower for backup shots but not much.
    A buddy's Dad who was a Merchant Marine ship's Captain had unissued one in .30-06 he brought back from WWII.
    He went all out to have it sporterized as his once in a lifetime custom rifle.

    The rear sight was removed, scope mounts put on, a new ,30 machine gun barrel fitted, trigger work, new stock, and so on.
    It may not be available anymore, but I'd swear some sort of kit or parts were put on that it cocked on opening.

    He did it, just because he could, but it may not have ever been fired.
    My buddy didn't remember him ever shooting it, and in his estate, there was no ammo for it.
    In school: We learn lessons, and are given tests.
    In life: We are given tests, and learn lessons.


    OK People. Enough of this idle chit-chat.
    This ain't your Grandma's sewing circle.
    EVERYONE!
    Back to your oars. The Captain wants to waterski.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check