Lee PrecisionRotoMetals2Reloading EverythingInline Fabrication
MidSouth Shooters SupplyTitan ReloadingWidenersRepackbox
Load Data
Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: 35rem, bullet and load

  1. #21
    Boolit Master and Dean of Balls




    fatnhappy's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Posts
    2,588

    Saeco 200 grainer.
    I've had pretty good results with 35 grains of IMR 3031 in my microgroove, not that my eyes are as discerning with irons anymore.
    Quote Originally Posted by Theodore Roosevelt
    No man is above the law and no man is below it: nor do we ask any man's permission when we ask him to obey it.

  2. #22
    Boolit Master Rodfac's Avatar
    Join Date
    Nov 2008
    Location
    Oldham Co., KY
    Posts
    637
    RCBS 35-200 GC FN, ACWW + 2% tin, sized 0.359" for a Marlin 336 in .35 Remington. SR4759 works well giving 1600 - 1700 fps. Rod
    Rod

  3. #23
    Boolit Master
    Join Date
    Aug 2006
    Posts
    551
    I’m running the RCBS .358 200gr FNGC (218gr w/check and SPG lube) at .360” .
    Over 34.5gr of H4895, it gets 1,950fps at 2.5-3” from my Marlin M336C.
    Over 39.0gr BLC2, it gets 2,050fps and under 2”. It’s a real deer slayer!
    For a Marlin Microgroove barrel, sized diameter MUST be .360 or .361”...
    When I bought my mold +/-10yrs ago, the Lee wasn’t available. Now I’d just get the Lee mold.

  4. #24
    Boolit Master RU shooter's Avatar
    Join Date
    Nov 2006
    Location
    SW Pa.
    Posts
    2,928
    Another vote for the Lee 200 or the ranch dog 190 both do very well with top end jacketed loads of 4895
    If you find yourself in a fair fight, your tactics suck!

  5. #25
    Boolit Master


    Soundguy's Avatar
    Join Date
    Oct 2016
    Location
    N Central Florida
    Posts
    2,833
    I use a lee C358-200-RF It is a .358 200gr fp gas check mold. Dual and 6 cavity numbers are: 90449 90016. I use the 90048 lee push thru sizer to attach my gas checks.

    Works fantastic in my and my buddies marlin 336's.

    Ps.. it's the bullet I use as my avatar.

  6. #26
    Boolit Master
    Join Date
    Feb 2008
    Location
    Eureka MT
    Posts
    2,513
    The rcbs 200 or the lee copy is my favorite boolit. I have used RL7,3031 and 4320 all with good success at around 1900 to 2000 fps. wcww and checked in an old M8 Rem gets about 2 1/2" at 100yds.

  7. #27
    Boolit Master
    high standard 40's Avatar
    Join Date
    Jan 2009
    Location
    South Louisiana
    Posts
    1,205
    Quote Originally Posted by Larry Gibson View Post
    RCBS 35-200-FN and H4895.
    I'm going to agree with Larry. This combination in both of my 35 Remingtons is hard to beat.

  8. #28
    Boolit Buddy DCB's Avatar
    Join Date
    Oct 2016
    Location
    Ohio
    Posts
    276
    Thanks.

  9. #29
    Boolit Master
    Join Date
    Jun 2007
    Location
    Middle of the Mitten
    Posts
    1,330
    Quote Originally Posted by imashooter2 View Post
    The RCBS 35-200-FN over 31.0 grains of Alliant RX7 makes 1,932 FPS average from my Marlin. 5 shot groups average right around an inch at 50 yards with an elbows rest and my tired old eyes.
    Pretty much where I ended up...31.2 gr of RE-7, because i have a powder dipper that throws that, reliably.. and in my bolt action Mauser, I am pretty much right at 2100 fps.. But, my Chrono is only about 10 feet in front of the muzzle..
    Best part is... it seems to shoot better actually (slightly) than the 150 Remington pointy condom..pushing 2400 fps
    Gonna be very hard to beat, as I cannot shoot better than either of those!!
    Hope you enjoy as much as I have been!!!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check