MidSouth Shooters SupplyLoad DataInline FabricationReloading Everything
Titan ReloadingSnyders JerkyRotoMetals2Repackbox
Lee Precision Wideners
Page 1 of 2 12 LastLast
Results 1 to 20 of 34

Thread: squib load

  1. #1
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,173

    squib load

    I have a lite load for my 222 rem
    that is a cast 60 gr boolit behind 6.5 gr red dot
    I plan on using it for a trap line dispatch round
    Do you all think this would be good or should I just use my 22 rimfire?
    Hit em'hard
    hit em'often

  2. #2
    Boolit Master reloader28's Avatar
    Join Date
    Dec 2009
    Location
    nw wyoming
    Posts
    1,537
    I'd go with it if it shoots good.
    I can load 243 with 100gr RCBS boolit cheaper than I can shoot 22

  3. #3
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,173
    it only has to shoot 10 yds tops
    Hit em'hard
    hit em'often

  4. #4
    Boolit Buddy
    Join Date
    Sep 2020
    Posts
    166
    60 grain bullets might over penetrate. They will work better if the powder is behind the bullet.


    My last name is Senseofhumour.

  5. #5
    Boolit Master
    Join Date
    Dec 2009
    Location
    Quilcene, Washington
    Posts
    3,668
    I have used that load with a 53 gr boolit and the boolits aren't quite stable at 35 yards. The MV is about 1150 if memory serves. I recently bumped the load to 7.2 gr. I use these loads in my T/C Contender 10" barrel and they are extremely pleasant to shoot instead of regular loads with magnificent muzzle blast and ball of fire going down range.

  6. #6
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,173
    mine would be used in a Zastava bolt action with a 21" barrel
    I have not even shot them yet and quite frankly forgot I even made them
    Hit em'hard
    hit em'often

  7. #7
    Boolit Man
    Join Date
    Feb 2011
    Location
    NSW Australia
    Posts
    96
    Quote Originally Posted by white eagle View Post
    mine would be used in a Zastava bolt action with a 21" barrel
    I have not even shot them yet and quite frankly forgot I even made them
    You are going to find this will be a strong load compared to a 22 rimfire,I would try a few first before going on the trap line,possibly 4.5 grains would be plenty for 10 yards.

  8. #8
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    2,644
    White Eagle; I think 6.5gr of Red Dot would be plenty for the use you describe. I'm a TiteGroup fan for light loads. With the Noe RN 60gr. bullet I've used as little as 2.8gr.of TG in 223 cases. My favorite is 7 to 8gr. TG. I'm just guessing but your load sounds about 22 mag to me. Gp

  9. #9
    Boolit Master
    Join Date
    Jan 2018
    Posts
    2,585
    Not saying that your plan isn't without merit , but I have trapped a lot of critters in my life, an old trapper told me never to use anything other than 22 Long for trapped kills. You take the bullet along a rough file (back side of a hoof file specifically) before use to half the length creating a protruding wad cutter of sorts. Even those will make 2 holes! I now prefer hollow point 22 shorts and shoot for the eye - directing towards the neck. I never wanted to carry more than a pistol with all of my gear packed either on my back or horseback so that's all I had. That man left me his trapping pistol when he passed, gotta say it's among my most treasured sidearms.

    Sent from my Pixel 5 using Tapatalk

  10. #10
    Boolit Master
    Join Date
    Jul 2015
    Location
    Wilmington NC
    Posts
    1,452
    Quickload says a 60 gr cast on top of 6.5 gr Red Dot and a 0.260 seating depth will get just over 1950 fps. That is a whole lot more than a 22 LR and sounds like more than you really need.

    With 10 yards max range, you may want to consider going sub sonic.

    Quickload says it should only take around 2 gr. I would start around 3 or 4 (I would rather avoid any risk of a stuck bullet - they are a pain) and work my way down until the crack goes away.

    I did the sub sonic thing with Red Dot and a light bullet 30 Herrett load I was using for standing target practice with my Contender. It was very accurate at 10 yards and pleasant to shoot.

    The reduction in noise can be worth the effort. With your long barrel, the sound level of a light Red Dot charge may be quite low.
    And given you are talking short range with a heavy (compared to rimfire) bullet, you should get ample penetration.

  11. #11
    Boolit Grand Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    7,097
    I'm with MikeH, I'd go with 3-4.5 of Red Dot.

    Chances are someplace in that range your going to find consistancy and decent accuracy at least to 25 yards.
    I truly believe we need to get back to basics.

    Get right with the Lord.
    Get back to the land.
    Get back to thinking like our forefathers thought.


    May the Lord bless you and keep you. May the Lord make His face to shine upon you and be gracious unto you
    and give you His peace. Let all of the earth – all of His creation – worship and praise His name! Make His
    praise glorious!

  12. #12
    Boolit Grand Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    USA
    Posts
    5,536
    Quote Originally Posted by white eagle View Post
    mine would be used in a Zastava bolt action with a 21" barrel
    I have not even shot them yet and quite frankly forgot I even made them
    A buddy of mine has semi auto but it’s missing a magazine

  13. #13
    Boolit Master bosterr's Avatar
    Join Date
    Dec 2011
    Location
    Western Pa.
    Posts
    789
    Since you will be shooting towards the ground, do you need to think about the powder charge sitting away from the primer?

  14. #14
    Boolit Master
    Join Date
    Sep 2006
    Posts
    580
    I think your 22LR is a better option for this task.

  15. #15
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,173
    new to trapping and dispatching catch
    I just thought the 22 rf was a little on the
    small side however after reading all the
    replies and seeing other people saying
    what to use I think the 22 rf is the way to proceed
    Hit em'hard
    hit em'often

  16. #16
    Boolit Buddy
    Join Date
    Sep 2020
    Posts
    166
    You could do worse. Been killing hogs for many moons with .22 CB Shorts.

  17. #17
    Boolit Grand Master


    missionary5155's Avatar
    Join Date
    Feb 2007
    Location
    Temporarily near Orlando FL
    Posts
    7,133
    22 rimfire put down some huge farm hogs in SW Michigan in the late 50s and early 60's where I grew up. Grampa Fike's would use 22 longs in a battered old 22 rifle. Stick the barrel into the ear of a cribbed hog and down went the hog.
    I bet a .224 -226 Round Ball fired at 700 fps would be all you would need for a trapped critter
    "Come unto Me, all you who labor and are heavy burdened, and I will give you rest." Matthew 11:28
    Male Guanaco out in dry lakebed at 10,800 feet south of Arequipa.

  18. #18
    Boolit Master
    Join Date
    Sep 2006
    Posts
    580
    There's a documentary on once of the streaming services called Trapper Jake. That man was 95 years old and still trapping coyotes on Wyoming regularly, using a steal rod to dispatch his catches. Man, that dude's determination to live puts me all to shame. Good show if you can find it.
    A 22LR straight in the forehead does the trick, but from experience, not in the heart lung area very quickly. Once I wanted to save the skull so decided to hit the heart on a snared coyote. Last time for that with a 22LR for that. I, too, have killed many hogs with the lowly 22LR. One behind the ear turns them into gymnast right quick.

  19. #19
    Boolit Master
    Join Date
    Jan 2018
    Posts
    2,585
    Quote Originally Posted by white eagle View Post
    I have a lite load for my 222 rem
    that is a cast 60 gr boolit behind 6.5 gr red dot
    I plan on using it for a trap line dispatch round
    Do you all think this would be good or should I just use my 22 rimfire?
    What are you trapping? I apologise for not asking that earlier!

    Sent from my Pixel 5 using Tapatalk

  20. #20
    Boolit Buddy
    Join Date
    May 2016
    Location
    Missouri
    Posts
    223
    CCI 22 short hollow point. My brother uses it for 5-600 racoons a year.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check