Thanks Hick, I saw that the 168 grain AMAX will work in the Hornadays 9th edition and the Lymans 49 edition. I'm hoping someone has pet loads for any of the bullets I had listed with IMR 4895. I do appreciate the reply, have learned a lot so far.
Was wondering if one style of bullet (boattail, Spitzer, etc) was preferred over the other. Lyman recommended Spitzer bullets with weights between 150-168. I received 11 clips of "AMA 80" headstamped cartridges with green primer sealant in cardboard sleeves when I acquired the weapon. Primers are not crimped. Any info is appreciated. I may pull one to check the weight after I shoot a few to see how they do.
Also curious if Dacron would be of benefit or if it may interfere with the gas system. I doubt it's needed but just asking.
I see myself ordering a few books in the near future. Previous posts on literature was helpful, thanks guys.
I'm not planning to try cast boolits for this weapon anytime soon if at all. I have a few weapons dedicated to jacketed only and vice versa.
Did I mention "I'm Stoked" to have this weapon?
Slim
Edit: AMA = Danish Government Arsenal (Ammunitionsarsenalet) Copenhagen, Denmark.
It's berdan primed and non-corrosive.