WTB - Service - Sizing of six (6) 12 gauge all brass shotgun shells

[Jkrem]

I have 6 Alcan 2-1/2” brass 12 gauge cases that I would like to have run through an RCBS Cowboy 12 gauge die set. As I’m looking at a substantial investment to do this myself, I’m hoping someone here has the setup and might be able to help me out with sizing these 6 shells. Please pm if you are set up to size these, and let’s discuss a fair service charge. My cases are decapped and scrubbed, but not polished. Thank you. Jim

[Spudgunr]

Would the Mec collet sizer not work? Those may be easier to come across; if that would work I have one and could size them for you. No cowboy die set though.

[Jkrem]

I understand a MEC sizer will not work on brass, I have a MEC 600 press and don’t want to experiment...

Would the Mec collet sizer not work? Those may be easier to come across; if that would work I have one and could size them for you. No cowboy die set though.

[Gewehr-Guy]

Lyman made their steel sizing die for shot shell cases too, that you could size them with a vise or big hammer. I had one, but haven't seen it in a while. I would think they would show up on ebay occasionally.

[dsh1106]

I have the Lyman/Ideal 12 gauge FL sizing die.
I also have a 12 gauge die set made for the AA Truett Press that I can remove the depriming rod from.

I've used these to size regular hulls, but I never tried all brass hulls.

I can try sizing then if you want, if you think that will work.
PM me
Scott

[Sam Sackett]

what about the sizing sleeve for the Lee LoadAll? They are cheap and might be used manually?? Hammer tap thru sleeve and back out??

Sam Sackett

[Markopolo]

you will want to use the cowboy rcbs to size them... if you cant find anybody, you can send them to me and I will size with mine, I do all brass shells all the time.

[curdog]

I wonder if a mec case conditioner and a super sizer would work? I have both and would do it for postage....................Curdog

[curiousgeorge]

I have 10 old Win & Rem brass casings. I have a set of old sizing / loading tools which are a mixture of Lyman and homemade. I have sized and loaded my cases many times with these tools. I would be glad to size your cases if you want me to. Send me a PM if interested.

[Springfield]

I have a Lachmiller case conditioner, and I have 1 old brass shell. I will try it and see how it works.

[alfloyd]

I have access to the 12 gage cowboy die set.
I can size your cases for you.

PM me to set thing up.

Lafaun

[Jkrem]

PM Sent

I have access to the 12 gage cowboy die set.
I can size your cases for you.

PM me to set thing up.

Lafaun