WTB: Case trimming / deburr / chamfer setup for 223

[guy_with_boolits]

Looking for something that will trim, chamfer, and deburr 223. Currently using LEE quick trim die and its horrible. So I am looking for something that:

a) works every time, the first time
b) will allow powered use like a drill or drill press
c) can let me get up to 10 cases a minute fully trimmed, deburred, and chamfered

it does not have to be:

a) fully working...if its broken but can be fixed I might still want it
b) fully sharp..if there are replacement cutters available and it needs them because the current ones are dull, I might consider that

[0verkill]

I can't help with a trimmer, but I've wanted to try the quick trim. If you're getting rid of it I'd buy it to help defer the cost of a new setup.

[tred1956]

Not Cheap BUT is as good as I have used:

https://giraudtool.com/giraud-power-trimmer.html

[dimaprok]

I have this setup, I've added since a flexible shaft to be used with my electric screwdriver and you can do a case in 10 sec easy. It uses RCBS 3 way head so it trims, chamfers and deburs. Also you're not limited to 223 only as I still got original trim cutter and pilots for multiple calibers.

https://youtu.be/yXfNMpJUStM

PM me if interested.

Sent from my SM-G950U1 using Tapatalk

[Johnny_V]

I use the Forster setup in my drill press with Forster's 3 in 1 trimmer and can do about 20 - 25 cases a minute (once you get a rhythm going).

[recumbent]

I use this works great and is fast. https://www.littlecrowgunworks.com/s...ton-p117183975

[Wisest.fool]

I have a little crow gunworks trimmer for 223 and a case prep center i could part with pm for details.