I do not have a mould; so looking for just about 2 dozen or so, .490 round balls in pure lead, I just want to have a small supply on hand for slugging barrels. Let me know if you can help, let’s work something out!
Thanks,
namsag
I do not have a mould; so looking for just about 2 dozen or so, .490 round balls in pure lead, I just want to have a small supply on hand for slugging barrels. Let me know if you can help, let’s work something out!
Thanks,
namsag
Pm sent
Sorry, I just went and looked and forgot I got rid of that mold a while ago.
Last edited by Seeker; 03-23-2021 at 04:17 PM.
Send me you address in a few pm. Have 490,36cal about and 32 cal will send a some of each.
you can always buy lead roll solder and mash up something for slugging a barrel
if you are ever being chased by a taxidermist, don't play dead
"This is America !!, where many have fought and died for our right
to celebrate our views with inflatable creatures in our yards ......."
barrel type fishing weights work great and come in several sizes. The shape and the hole in the middle make for easier sizing.
If you have soft lead and a fired pistol case, just melt some lead into the case, then remove with a kinetic bullet puller. The slug will be tapered and easy to start and not much over groove size. Works great.
Of course the case is annealed and scrap, cannot be safely loaded again.
Thanks, some great ideas in here.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |