WidenersTitan ReloadingInline FabricationReloading Everything
Load DataLee PrecisionMidSouth Shooters SupplyRepackbox
RotoMetals2
Page 1 of 5 12345 LastLast
Results 1 to 20 of 87

Thread: ACTIVE - MIHEC 359-125 FB (9mm) Rerun 4 Cav HP or 6 Cav Solid Brass

  1. #1
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139

    ACTIVE - MIHEC 359-125 FB (9mm) Rerun 4 Cav HP or 6 Cav Solid Brass

    Hello Guys the design has been asked about several times so here we go let’s rerun it.
    We are going to keep it simple in options 1 HP design 1 Solid design.


    -Casts .359 - 125 grain HP or 130 grain solid
    - Hi Tek is an option also adds another 5 grns roughly 130 hp 135 solid
    -Steel sprue plate
    -Hardened steel alignment pins
    - Allen keys are included
    -RCBS/Lyman top punch is included
    - Use LEE 6 cavity handle or MP mold handles (NOT included)
    -Sample of sprue lube is included (15ml)
    - 3 set of pins (round, penta, blank)


    -Price is as follows
    - 4 Cavity Brass HP: 135 euros plus shipping, all pins, top punch and allen keys
    - 6 Cavity Brass Solid: 95 euros plus shipping, top punch and allen keys
    - 8 Cavity Aluminum Solid: 95 euros plus shipping, top punch and allen keys
    - Group buy discount of 15% off will be given at check out time
    - Shipping is approximately 16 euros for first mold.
    If you purchase 2 molds it is 18 euros (for both)
    If you take 3 molds shipping is approx 20 euros....

    Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN



    Please give your disguised address and what mold design you would like.

    EYE CANDY -Click image for larger version. 

Name:	9mm_125HP_largo.jpg 
Views:	1111 
Size:	3.9 KB 
ID:	278964Click image for larger version. 

Name:	9mm_125HP_largo.jpg 
Views:	1111 
Size:	3.9 KB 
ID:	278964Click image for larger version. 

Name:	mp 359 125.jpg 
Views:	152 
Size:	42.4 KB 
ID:	278965
    Last edited by Wasalmonslayer; 03-21-2021 at 09:43 AM.

  2. #2
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Group Buy is now Closed!


    Group Buy Sign Up List -

    HP List

    1) max at yvmarine dot com - 4 Cav HP Hi Tek
    2) Bda UZat 8 0 AT g Mai L dot coM - 4 Cav HP Hi tek
    3) Spanglercustomknives at medot com - 4 Cav HP
    4) Bsbenj at msn dot com - 4 Cav HP
    5)
    6) Spanglercustomknives at medot com - 4 Cav HP
    7) ess ess pee one at hotmail dot com - 4 Cav HP
    8) ess ess pee one at hotmail dot com - 4 Cav HP
    9) ess ess pee one at hotmail dot com - 4 Cav HP HiTek
    10) 6shot at gmail dot com - 4 Cav HP HiTek
    11) Lumberman31 at gmail dot com - 4 Cav HP
    12) 6shot at gmail dot com - 4 Cav HP HiTek
    13)
    14)

    Solid List

    1) max at yvmarine dot com - 6 Cav Brass Hi Tek
    2) HHWADKINSIII at aol dot com - 8 Cav Alum
    3) mvintx 85 at yahoo dot com - 8 Cav Alum with Handles
    4)
    5)
    6)
    7)
    Last edited by Wasalmonslayer; 09-04-2022 at 02:20 PM.

  3. #3
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Awesome photo compliments of Gamseks great photo skills

    Lets get her rolling

    Need a 100 HP pins to go active on this one and then it is up to Miha to close it when production is happening!

    Thanks Gents
    WS

  4. #4
    Boolit Buddy DAFzipper's Avatar
    Join Date
    Mar 2008
    Posts
    332
    Any chance you can offer a .357 diameter? Less sizing after powder coat.

    Sent from my SM-T713 using Tapatalk

  5. #5
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by DAFzipper View Post
    Any chance you can offer a .357 diameter? Less sizing after powder coat.

    Sent from my SM-T713 using Tapatalk
    Trying to streamline buys to make production easier.
    These size easy after coating to .357.
    These are what I cast and powder coat now and size to .357 like butter!

  6. #6
    Boolit Mold
    Join Date
    Mar 2021
    Location
    Somewheres, Louisiana
    Posts
    6
    Love the design and weight, sorry, but holding out for a gas check also. In

  7. #7
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by Grits&giggles View Post
    Love the design and weight, sorry, but holding out for a gas check also. In
    This design has never had a gas check and probable won't it does not need one it shoots perfect in every 9mm/38-357 I have tried it in if you get fit and alloy right it will scare you how good it shoots!

    Not sure if the design lends itself to a GC as you would machine off most of the rear band and if you use a star lube sizer the hydraulic pressure it creates would unseat the check off the base of the bullet.

    Ask me how I know....
    I designed a bullet that way once and it was perfect up until I tried to size and lube it

  8. #8
    Boolit Mold
    Join Date
    Mar 2021
    Location
    Somewheres, Louisiana
    Posts
    6
    Grits, Bda UZat 8 0 AT g Mai L dot coM. 4 cav hp hi- tec.

  9. #9
    Boolit Mold
    Join Date
    Mar 2021
    Location
    Somewheres, Louisiana
    Posts
    6
    I'm in for the 4 cav hp hi-tec mold, just thought there would be ample room for a gc with the hi-tech option. Concerns for double base powders dissolving pc.

  10. #10
    Boolit Master oldhenry's Avatar
    Join Date
    Mar 2016
    Location
    Albany, GA
    Posts
    902
    I'll take a 8 cav. aluminum with lube grooves & BB if available as an option.
    HHWADKINSIII at aol dot com
    Last edited by oldhenry; 03-11-2021 at 09:27 PM.

  11. #11
    Boolit Master BJK's Avatar
    Join Date
    Sep 2020
    Location
    central Maine
    Posts
    723
    deleted. I allowed my exuberance to get ahead of my expertise.
    Last edited by BJK; 03-11-2021 at 06:12 PM.

  12. #12
    Boolit Buddy
    Join Date
    Jan 2013
    Location
    Beattie, TX
    Posts
    254
    OK, sign me up. 8 cav aluminum solid, lube groove with handles; mvintx 85 at yahoo dot com

  13. #13
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    All added guys

    Thanks
    WS

  14. #14
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by Grits&giggles View Post
    I'm in for the 4 cav hp hi-tec mold, just thought there would be ample room for a gc with the hi-tech option. Concerns for double base powders dissolving pc.
    There would be room on hi tek but that would require a new cherry and we would be waiting that much longer this one he has a cherry inhouse and it is quicker because it is a rerun.

    If enough interest is there would could start another buy in GC but it may take a couple of years to get the mold

    Thanks
    WS

  15. #15
    Boolit Master oldhenry's Avatar
    Join Date
    Mar 2016
    Location
    Albany, GA
    Posts
    902
    My request was for a solid aluminum 8 cav. with lube groove. You have it listed for Hi Tek: please correct.
    Thanks,
    Henry

  16. #16
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by oldhenry View Post
    My request was for a solid aluminum 8 cav. with lube groove. You have it listed for Hi Tek: please correct.
    Thanks,
    Henry
    Thanks you for verifying all fixed up.
    WS

  17. #17
    Boolit Buddy Low Budget Shooter's Avatar
    Join Date
    Feb 2010
    Location
    Texahoma
    Posts
    464
    Wasalmonslayer, thanks for running this. For those of you who are not yet familiar with this bullet, this is the best cast 9mm bullet ever. The combination of accuracy, expansion, ease of loading (shallow in case), weight, is cast bullet 9mm perfection. This is all I use for 9mm anymore. If in doubt, just get two of this mold, sell all your other 9mm molds, and be happy!
    I'm not sure where all the money is that I've "saved" by casting and reloading!

  18. #18
    Boolit Man
    Join Date
    May 2020
    Posts
    95
    Pardon the ignorance but was is “hi tek option”?

  19. #19
    Boolit Master


    Join Date
    May 2010
    Posts
    2,108
    Please set me up with a 4 cavity HP brass
    Spanglercustomknives at medot com

  20. #20
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by Michael J. Spangler View Post
    Please set me up with a 4 cavity HP brass
    Spanglercustomknives at medot com

    You are added

    Thank you
    WS

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check