RepackboxTitan ReloadingInline FabricationLee Precision
RotoMetals2Reloading UKADvertise here

Results 1 to 4 of 4

Thread: 6.8 spc

  1. #1

    6.8 spc

    I know the selection for molds in 6.8 SPC was fairly limited as of a few years ago. It seems like most of the molds were tailored to 270 win or other cartridges. Has anyone had any luck finding newer designs or found one that works particularly well with the 6.8 SPC? Bonus points if its still in production.

  2. #2
    Boolit Master

    SSGOldfart's Avatar
    Join Date
    Sep 2011
    East Texas
    Sir the 6.8 bullet is the same as the 270 I like the 120grn. Shorter designs from NOE but one never knows when it is in stock
    Last edited by SSGOldfart; 03-01-2021 at 05:33 PM. Reason: Window's spell check thingy messed up the post
    I started out with nothing and I still have most of it left.
    Paralyzed Veterans of America

    Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavity

  3. #3
    Correct, the NOE 279-126-FN-E2-31 is the only one I've been able to get my hands on that my 6.8 seems to like.

  4. #4
    Boolit Master Harter66's Avatar
    Join Date
    Jan 2010
    90 miles North of Texarkana 9 miles from OK in the green hell
    I have several and the .279-124 NOE is the easiest to work and get good to excellent results .

    I have several 130s all were barn door loads in anything that would cycle , in an alloy less than lino .
    I don't know what your use is but it's not too hard to get a load together with the NOE jacketed data and rifle gas that will get 1000 ftlb at 100 yd and in a GI barrel get 2" and a good HBAR an inch or less with a useful game alloy .
    In the time of darkest defeat,our victory may be nearest. Wm. McKinley.

    I was young and stupid then I'm older now. Me 1992 .

    Richard Lee Hart 6/29/39-7/25/18

    Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
    Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check