RotoMetals2Titan ReloadingLee PrecisionReloading Everything
RepackboxMidSouth Shooters SupplyLoad DataWideners
Inline Fabrication
Page 2 of 2 FirstFirst 12
Results 21 to 35 of 35

Thread: Heavy Hollowpoint for .40 / 10mm

  1. #21
    Boolit Master
    Join Date
    Jan 2011
    Location
    Nebraska
    Posts
    1,171
    I would be the honcho for this mold, but I don't know how Mihec does this these days. Can anybody advise?

  2. #22
    Boolit Master
    Join Date
    Jul 2009
    Posts
    678
    I'd be interested in a 2-cavity HP mold that drops a 180 grain deep HP slug. Not sure which of the previous designs would fit the bill...will have to check out the drawings again.

  3. #23
    Boolit Master
    Join Date
    Feb 2021
    Posts
    1,013
    I’d be interested, especially in a 200 gr version without lube grooves.

  4. #24
    Boolit Master


    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    3,729
    I just picked up a Arsenal 403-200 WFN PC bullet and cast it yesterday

    BEAUTIFUL BULLET!! I have been waiting for that MO 402-200 for more than a YEAR!! LOVE LOVE MP MOLDS, but not the wait.

    https://youtu.be/KoIJ0tAaUZ8
    NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
    Come visit my RUMBLE & uTube page's !!

    https://www.RUMBLE.com/user/Cwlongshot
    https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw

  5. #25
    Boolit Master
    Join Date
    Feb 2007
    Location
    Soda Springs, Idaho
    Posts
    1,093
    Just got an NOE 5 cavity WFN 190 gr mold last week, makes a great bullet. Casts easy & shoots great in my Kimber 10mm. Would be interested in a heavy HP if a group buy comes up from anyone.
    Did a strange thing happen yesterday that I've never seen before. I'm not a big time semi auto guy but I do load a lot of 9mm, 40 & 45 acp. I shot about 5 mags through my Kimber Eclipse & when I was picking up the brass, which had been thrown a long ways, I noticed 3 of them were pretty mangled on the ends. All bullets were powder coated.
    This was once fired brass, mixed Federal & Winchester mostly. All of the brass had been checked after loading, did the plunk test in my barrel, everything checked out fine. All ammo fired & ejected fine. Used 2 different loads with the 190 gr bullet, seated to 1.260" & using CCI 300 primers. This was 3 rounds out of about 40 rounds fired! Loads were 8.5 grs of Longshot & 13.5 grs of AA9. Thoughts?


    Dick
    Last edited by sixshot; 11-14-2021 at 05:25 PM.

  6. #26
    Boolit Master
    Join Date
    Feb 2021
    Posts
    1,013
    Looks like they got pinched by the slide during the ejection process, or maybe these were at the range before you were and you are mistaking these as part of the 40 you shot. Are there witness marks anywhere else on these?

  7. #27
    Boolit Master


    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    3,729
    I get a pretty bad scuff and flat side on hot loads but never have seen it cause a torn case mouth!!

    Good point are you sure that you shot these?


    CW
    NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
    Come visit my RUMBLE & uTube page's !!

    https://www.RUMBLE.com/user/Cwlongshot
    https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw

  8. #28
    Boolit Master
    Join Date
    Feb 2007
    Location
    Soda Springs, Idaho
    Posts
    1,093
    Yes, they came out of my gun, one of them hit me on the shoulder. Shot again yesterday, same loads & no problems!

    Dick

  9. #29
    Boolit Master
    Join Date
    Jul 2009
    Posts
    678
    I'd be in for a 2-cav heavy 40 HP MOLD if we can talk Miha into doing an Oreo re-run.

  10. #30
    Boolit Man
    Join Date
    Aug 2011
    Location
    ZARAGOZA-SPAIN-
    Posts
    82
    I am interested in 200gr solid WFN. One lube groove. Beavel base. 6 or 8 cavities.

  11. #31
    Boolit Man
    Join Date
    Aug 2011
    Location
    ZARAGOZA-SPAIN-
    Posts
    82
    Is this stopped??

  12. #32
    Boolit Bub

    Duke3026's Avatar
    Join Date
    Feb 2016
    Location
    MT
    Posts
    56
    I’d be interested in this mold.

  13. #33
    Boolit Master
    Join Date
    Jul 2009
    Posts
    678
    Anyone PM'd Miha about the possibility of this?

  14. #34
    Boolit Man
    Join Date
    Aug 2011
    Location
    ZARAGOZA-SPAIN-
    Posts
    82
    Is the post/discussion dead??

  15. #35
    Boolit Master

    Join Date
    Mar 2005
    Location
    maine
    Posts
    1,010
    Im intrested as well!!!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check