I would be the honcho for this mold, but I don't know how Mihec does this these days. Can anybody advise?
I would be the honcho for this mold, but I don't know how Mihec does this these days. Can anybody advise?
I'd be interested in a 2-cavity HP mold that drops a 180 grain deep HP slug. Not sure which of the previous designs would fit the bill...will have to check out the drawings again.
I’d be interested, especially in a 200 gr version without lube grooves.
I just picked up a Arsenal 403-200 WFN PC bullet and cast it yesterday
BEAUTIFUL BULLET!! I have been waiting for that MO 402-200 for more than a YEAR!! LOVE LOVE MP MOLDS, but not the wait.
https://youtu.be/KoIJ0tAaUZ8
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Just got an NOE 5 cavity WFN 190 gr mold last week, makes a great bullet. Casts easy & shoots great in my Kimber 10mm. Would be interested in a heavy HP if a group buy comes up from anyone.
Did a strange thing happen yesterday that I've never seen before. I'm not a big time semi auto guy but I do load a lot of 9mm, 40 & 45 acp. I shot about 5 mags through my Kimber Eclipse & when I was picking up the brass, which had been thrown a long ways, I noticed 3 of them were pretty mangled on the ends. All bullets were powder coated.
This was once fired brass, mixed Federal & Winchester mostly. All of the brass had been checked after loading, did the plunk test in my barrel, everything checked out fine. All ammo fired & ejected fine. Used 2 different loads with the 190 gr bullet, seated to 1.260" & using CCI 300 primers. This was 3 rounds out of about 40 rounds fired! Loads were 8.5 grs of Longshot & 13.5 grs of AA9. Thoughts?
Dick
Last edited by sixshot; 11-14-2021 at 05:25 PM.
Looks like they got pinched by the slide during the ejection process, or maybe these were at the range before you were and you are mistaking these as part of the 40 you shot. Are there witness marks anywhere else on these?
I get a pretty bad scuff and flat side on hot loads but never have seen it cause a torn case mouth!!
Good point are you sure that you shot these?
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Yes, they came out of my gun, one of them hit me on the shoulder. Shot again yesterday, same loads & no problems!
Dick
I'd be in for a 2-cav heavy 40 HP MOLD if we can talk Miha into doing an Oreo re-run.
I am interested in 200gr solid WFN. One lube groove. Beavel base. 6 or 8 cavities.
Is this stopped??
Anyone PM'd Miha about the possibility of this?
Is the post/discussion dead??
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |