I am in the market for a rotary media separator.
I see a number of them for sale, RCBS, Lyman, Frankfort, Etc.
What are your experiences with these?
thanks, dale
I am in the market for a rotary media separator.
I see a number of them for sale, RCBS, Lyman, Frankfort, Etc.
What are your experiences with these?
thanks, dale
Last edited by dale2242; 12-13-2020 at 05:01 PM.
I have this one . It will sort and separate cases and seems to do well with pins but it is the only rotary one I have used so nothing to compare it to.
https://www.cabelas.com/shop/en/cabe...edia-separator
I also have one similar to this for dry media mine has a hole in the center for the stud that holds on the lid , you pour the cases/media in a bucket mount this on the vibrating tumbler turn it on and pour cases/media back in to vibrate separate the media.
https://www.cabelas.com/shop/en/cabe...dia-sifter-pan
Without going down stairs. And looking I believe I have a Lyman seporator. I inherited it from my dad when he passed away. I took a quick look online at most of the newer ones. Mine did not come with a bucket or cover. Not sure why you need a cover when cranking, because you don't crank like a banshee. But if quality is a question. Mine is at least 30 years old. And it works very well. Doesn't matter when using dry media or wet stainless pins.
Sent from my SM-N975U using Tapatalk
Frankfort here, bought new as an upgrade from a pail and colander. I use dry media but I guess it’s nice to have the capability to go wet/pins in the future.
Does what I need it to do and seems durable enough
Bought a plastic 1.99 colander from the thrift store. I just dump my tumbler into the colander and run my hands through the mix to flip the brass to get the dry media out of the cases. My simple idea only works with pistol cartridges. I dump the media back into the tumbler a couple times during the process as it piles up under the colander. Of course I do this inside a box to catch the media. Easier than picking the cases out one at a time.
depending on how handy you are and what resources you might have its not difficult to make a screen frame out of 2x4s and 1/4" hardware cloth
I've used the Berry's separator for many, many years, and find it to be about the best design I've tried.
Here's the link: https://www.berrysmfg.com/product/rotary-brass-sorter
Hope this helps.
Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.
I have a cabelas tumbler and it came with a colander style separator that looks like a gold mining pan with holes. I have found if I take a lid and put on it and hold while shaking, most if not all of the media filters out.
I use a steel wire mesh basket for a media separator. I shake it over a plastic bin. The baskets are a buck at the dollar tree.
One round at a time.
Member of the NRA,GOA and FAOC. Gun clubs Zerby rod and gun club. Keystone Fish and Game Association.
I don't crank so fast that I have to worry about splashing. What I do is pour them from the tumbler into the separator. Water goes into bucket. Then I crank a few dozen times. I then pour the brass into a towel to dry. Sometimes I turn a small fan in to blow across the brass to help dry quicker. I have a strong magnet taped to the side of the bucket. Then I pour the water into another bucket. With the magnet side down to catch any loose pins. The magnet is taped a few inches from the bottom to let the water drip out of the trapped pins. I let that dry for a few days and then untape the magnet to let them fall into the bucket. Then I use the Franklin Armoury pin picker upper (lol) and put them back into the storage bags.
Sent from my SM-N975U using Tapatalk
I should have stated that I want a rotary media separator.
Just get this one, it's cheap and works great. I use mine with pins, but can also be used with other media. This is an upgraded version, I think you can adjust the opening to separate different cases, though I always hand sort.
https://www.midsouthshooterssupply.c...h-brass-sorter
"Freedom is the sure possession of those alone who have the courage to defend it."
~Pericles~
Best is the Dillon. The opposite of flimsy.
Your going to find most are the same, just re labeled and or a different color.
I have a older RCBS. The latches are poorly made and one of the handles broke early in life. It also takes up a good amount of space.
Depending on your needs.
If you can check them out in person even better.
RCBS and STM are the same.
Old spaghetti strainer works good also as long as the holes are big enough.
have had the cheap ones. they work but one of the best investments ive made is the big dillon seperator.
Another Dillon user, wish I had purchased it years earlier.
Take a kid to the range, you'll both be glad you did.
I have the larger Dillon and it has worked well for years. I recently bought an RCBS to have a smaller easier to use unit and I was not happy with it. It has grooves inside each end that were just the right size to catch and hold the little stainless pins.
Ditto. My Dollar Tree wire mesh office waste paper basket has done a fine sifting job for decades.
I store my loose media, sifting basket and Lyman 1200 vibrator in a lidded plastic HomeDepot 5 gal paint pail so everything is protected in a compact package under my bench. I just pour my cases and fine grit (40/20) cob media into the tumbler. When it's done I put the wire mesh basket in the pail and pour the tumbler contents into it. I tilt the pail to about 45 degrees and then hand rotate the basket 3-5 times; all the cases are quickly emptied and everything is ready to be put away again.
No $50+ hand crank media sifting device can beat it for effectiveness and simplicity, never mind the cost savings!
Last edited by 1hole; 04-05-2021 at 12:35 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |