Anyone running one seen one on ebay im sure i could find a use for it. Just about anything made in the good ole days catches my eye
Anyone running one seen one on ebay im sure i could find a use for it. Just about anything made in the good ole days catches my eye
Those who would trade freedom for safety deserves neither and will lose both
I used mine, with the accompanying integral-handle Ideal 457124 mould, for my Garrett Sharps carbine in .45-70. It neck-sized the shells, sized and seated the boolits, re- and de- (after I made a replacement for the missing punch) capped the shells. The handles are big, so there was plenty of leverage, as tong tools go.
Once the .45-70s started multiplying around here, I mostly went to more conventional loading arrangements.
I have a couple of #5s and several #5 Ms. They are excellent powder measures. I find them a little quicker to adjust than the #55, but that may just be me.
Froggie
"It aint easy being green!"
powder measure or loading tool ?
Sorry, thought you were talking about the loading tool. I use my #5 measure all the time for BPCR loads. Most charges stay within 0.5 gr, can get closer by judicious use of the knocker.
I figgured they would be just as good as a 55 if it isnt wore out. My theory is the older the better
Those who would trade freedom for safety deserves neither and will lose both
NEWS FLASH!! The measure in the picture is not a plain old #5... it is a #5 Micrometer. This one doesn’t work well for very small charges but for medium on up to magnum, the micrometer adjust is awesome. I have several and it is the best I’ve found for the old IMR 4759 for 32-40. For a long time this measure was a well kept secret, but a select few are beginning to catch on. I grabbed mine while they were less well known thus cheaper to buy.
Froggie
"It aint easy being green!"
Thats just a google picture i thought id show the youngins what one was
Those who would trade freedom for safety deserves neither and will lose both
I think fleabay has a couple no. Of course, 1 is priced in the clouds. they come by quit regular.
one problem is the the cylinder is steel. and if you leave power in it can rust
they made the 55 with brass to stop that
its nice to put in the curio cabinet works there better
Spray the powder cavities with Rust-Oleum primer paint that stops rust
Regards
John
Green Frog, I use a No 5 Micro to reload 22LR with BP. Drops 4.5gr of Swiss Null-B with every crank ... honestly
Regards
John
MOA, yours was made by Lyman between 1926 and 1946. There no model variations of the No 5 other than the 5M so precise dating is impossible. The only distinction is the address. All Middlefield are Lyman, all New Haven's are Ideal or Marlin but for some reason Marlin never put there name on the No 5 or the No 1 sizer. They did on the moulds, tong tools and the big Armoury press.
The No 5 has a large drum and two small slides. The early 55 has two small slides, though they are completely interchangeable. I put a 55 micrometer drum in a No 5 and called it the No 5-55. Just because I could.
Last edited by Pressman; 09-16-2020 at 01:13 PM. Reason: Major goof on my part
Thanks for that bit o info now im really wanting one just for dropping blackpowder we'll see maybe one of these days
Those who would trade freedom for safety deserves neither and will lose both
Pressman. Thanks for the info. Guess I was going by the information on other side of the hopper. Most likely patent dates not mfg dates.
"It aint easy being green!"
Here’s one for anyone looking along with some other nice stuff... was going to contact them on either the sizer or the 55
https://spokane.craigslist.org/spo/d...186855867.html
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |