I believe I brought this up a while back, but there was not enough interest. A new Saeco 4 cavity mold for this boolit is near $200. An M-P molds 6 cavity brass, or 8 cavity aluminum mold for less money would be much more desirable. RJM52 posted some excellent pics of this boolit on an old thread which you can see here:
http://castboolits.gunloads.com/show...uper-SAECO-383
It seems to me that this medium weight boolit with a long nose and large meplat would be ideal for the 38 Super and also should work well in 9mm. These boolits are available from Montana Bullet Works, but at about a quarter each plus shipping in the 500 piece quantity, they are cost prohibitive for plinking. I can buy loaded factory 9mm for much less that that. Accurate Molds has some designs that are close, but not a direct copy. It seems that in the last few years the 9mm popularity has taken the shooting culture by storm. I would not hesitate to carry this bullet for a defense load in 38 Super, and maybe in 9mm. Now that some time has passed since I last posted about this, is there any interest? I hope RJM52 chimes in here and posts some more of his knowledge.