Here is a cost break down of both what I deem necessary and what additional upgrades I have to offer to make 20 cal bullets from various jacket materials using my dies. First of all I recommend using a Lee Classic Cast press with my BTSniper premium dies. I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up.
Should the customer already have the Lee Classic Cast press all that is needed is my auto eject set up and the press will be good to go for use with my dies.
Swage Press with Auto Eject
$489.00
BTSniper improved Lee Classic Swage press with auto eject
Auto Eject System
$249.00
auto eject for Lee Classic cast for customer that already has the Lee press
*looking closely it is a shell holder ram top pictured, the threaded ram top that uses my 1/2-20tpi base punches is shown in pic below. Shows that both my threaded base punches and shell holder style base punches can be used if necessary, threaded is standard, shell holder style is more expensive option.
BTSniper Premium 20 cal Swage Dies
*new ram top is shown in pic and will be included with purchase of either auto eject system or my complete swage press.
Commercial Jackets
This is a bare minimum set up.....
$699.00 point form die
$449.00 core seat die
$549.00 core bleed die
$249.00 eleven cavity core mold
$276.00 four threaded base punches
$249.00 core draw die (necessary to draw 22 cal core down to 20 cal)
$2471.00 total
Additional Add Ons and/or Upgrades....
22lr for jackets
The best choice for making both affordable, deadly and accurate 20 cal bullets is to use scrap 22lr brass for jackets.
$249.00 derim die
$69.00 derim die base punch
$249.00 draw die to reduce jacket diameter from 22 to 20 cal
$69.00 push threw base punch
$636.00
Standard reloading press options
Shell holder style base punch
$89.00 ea.
Auto Eject System for press with 1" ram
$249.00
Sold out at moment
These are the numbers, price and tooling required to form 20 cal bullets from various jacket materials. Notice some of the various kits have tooling that over laps and can be used with other kits should customer purchase more then one add on.
Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.
For order instructions or any questions feel free to contact me.
Brian Thurner
PO BOX 1783
Hood River, OR.
97031
BT_Sniper@hotmail.com
BTSNIPER llc.
541-436-4095