Load DataWidenersTitan ReloadingRotoMetals2
MidSouth Shooters SupplyLee PrecisionReloading EverythingInline Fabrication
Repackbox
Page 1 of 15 1234567891011 ... LastLast
Results 1 to 20 of 292

Thread: ACTIVE - 223/556 NATO HEAVY 75g HP or Solid - AR15 Rifle round

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221

    ACTIVE - 223/556 NATO HEAVY 75g HP or Solid - AR15 Rifle round

    LAST CALL on 07MAR2021


    - Casting at .227
    - HP or Solid (you choose)
    - Flat Base or Gas Check (you choose, only with a groove)
    - Grooved or NLG (you choose, if you choose NLG you will only get a FB)
    - Steel sprue plate
    - Hardened steel alignment pins
    - Allen keys are included
    - RCBS/Lyman top punch is included
    - Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
    -Sample of sprue lube is included (15ml)

    Pins included will be at a MINIMUM of: Large round, Small round and a blank pin.

    75 grains as a Solid w/grooves
    76 grains as a Solid NLG
    73 grains as an HP w/grooves
    74 grains as an HP NLG

    Click image for larger version.

    Click image for larger version. 

Name:	22 Nato Heavy HP.jpg 
Views:	356 
Size:	22.2 KB 
ID:	258852

    Mold Choices and Pricing


    Changes in RED
    - 3-cav Brass for HP (from 2-cav block) --> 85 Euro
    - 6-cav Brass for Solid --> 65 Euro
    - 8-cav Aluminum for Solid --> 65 Euro


    NEW SHIPPING DETAILS

    shipping is approximently 16 euros for first mold.

    If you purchase 2 molds it is 18 euros (for both)

    if you take 3 molds shipping is aprox 20 euros....

    Shiping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN


    GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

    Group Buy List

    3 cavity HP (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
    1) (flyingmonkey35) - HP NLG - NEED EMAIL ADDRESS on this one
    2) (Markopolo) - 3 cav, HP, GC - f i g e l s k i at y a h o o
    3) (Kylongrifle32 - 3 cav HP, PB - Mike dot Keith dot 700 at Gmail dot com
    4) (bronte454) - 3 cav HP, GC - thadd3220 at yahoo dot com
    5) (Greg) - 3 cavity HP, GC - kratzner (at) charter (dot) net
    6) (soflarick) - 3-cav HP, GC, +handles - soflarick at bellsouth. net
    7) (Boomsticks Firearms) - 3 cav HP, GC - boomsticksfirearms at lowcountry dot com
    8) (Lakehouse2012) - 3-cav HP, GC - sorgatz At ameritech d0t net - (Honcho mold)
    9) (Lakehouse2012) - 3-cav HP, GC - sorgatz At ameritech d0t net - (Honcho mold)
    10) (monkey wrangler) - 3 cav, HP, NLG + handle - mgehlenmesa at aol dot com
    11) (OutdoorDave) -3-cav, HP with the blank pin, lube groove and gas check. - littleblacklab at g mail dot com
    12) (Lonegun1894) - 3 cav, HP with GC, and all pins. +handles - Lonegun1894 at yahoo dot com
    13) (Brick85) - 3 cav, HP, GC - house of tang at yahoo dotcom
    14) (whelenshooter) - 3 cavity brass, HP, GC, grooved - mcminntd at ymail dot com
    15) (meadmkr) - 3 cav, HP, GC, grooved - meadmkr at y a h o o dot com
    16) (rcn11thacr) - 3 cav, HP, NLG, +handles - Redoldspot at gmail dot com
    17) (AviatorTroy) - 3 cav HP, LG, GC - Aviatortroy at gmail dot com
    18) (Beaker424) - 3 cav HP brass, Lube Groove, GC, all pins + handle - beaker424 at gmail dot com
    19) (Beaker424) - 3 cav HP brass, NLG, Flat Base, all pins + handle - beaker424 at gmail dot com
    20) (Lonegun1894) - 3 cav, HP with GC, and all pins. +handles - Lonegun1894 at yahoo dot com.
    21) (who) - 3-cav, GC, LG, HP + handle - R1niceler at comcast dot net
    22) (Cave) - 3-cav solid GC with groves +handles - j dot huntblelectrical At yahoo dot com
    23)
    24) (Lion2017) - 3 cav HP, GC - herrgiessviel at gmail.com
    25) (Krh1326) - 3 Cav HP - GC - Krhenrikson at MSN dot com
    26)
    27)
    28)




    6 cavity Solid (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
    1) (ilium) - 6 cav brass, solid, NLG +handles - iliumconst at gmail dot com
    2) (monkey wrangler) - 6 cav, NLG + handle - mgehlenmesa at aol dot com
    3) (Lion2017) - 6 cavity Brass, with grooves, GC - herrgiessviel at gmail.com
    4) (5Shot) - 6-cav, GC, Lube Groove - Jjdralston at aol dot com
    5) (Beaker424) - 6 cav Solid brass, Lube Groove, GC + handle - beaker424 at gmail dot com
    6) (Beaker424) - 6 cav Solid brass, NLG, Flat Base + handle - beaker424 at gmail dot com
    7) (Lonegun1894) - 6-cav solid grooved, GC - Lonegun1894 at yahoo dot com
    8) (LabGuy) - 6-cav Solid w/grooves, GC - LCEL at hotmail dot com
    9) (propwashp47) - 6 cav brass, NLG - drichardson40 at austin.rr.com
    10) (Armorguy63) - 6 cav Solid, NLG, Flat Base +handle - kshafer1 At gmail dot com
    11)
    12)


    8 cavity SOLID (Aluminum mold) (Lube Groove or NLG) with (Flat base or Gas Check)
    1) (Lakehouse2012) - 8 cav, GC - sorgatz AT aneritech dot net (Honcho mold)
    2) (Dapaki) - 8-cav, NLG - spamento at gmail dot com
    3) (John Wayne) - 8 cav, GC, + handles - d r o b e r tsk at gm ail dot c om
    4) (Kawacharles) - 8-cav, NLG - kawacharles1973 at g mail dot com
    5) (sigep1764) - 8-cav, Grooved, GC + handle- kylempcc at gmail dot com
    6) (rancher1913) - 8-cav Alum, NLG - rancher1913atyahoodotcom
    7) (hades) - 8 cavity alum, grooved, GC +handles - Calebwilking At gee mail dot com
    8) (oldfartz) - 8 cav, GC - oldfarts1952at aol dot com
    9) (FLYCUTTER) - 8 cav, GC, +handles - Runderscore KARK atATTdotnet
    10) (Plate plinker) - 8 cav, NLG - plateplinker at gmail dot com
    11) (FabMan) - 8-cav, NLG, FB - hestonhill at yahoo dot com
    12) (PNW_Steve) - 8 alum, GC - Sgregg64-at-gmail-dot-com
    13) (sigep1764) - 8-cav, NLG, FB - kylempcc at gmail dot com
    14) (Olsmoky) - 8-cavity NLG, +Handles - olsmoky95 at gmail dot com
    15) (Olsmoky) - 8-cavity NLG, +Handles - olsmoky95 at gmail dot com
    16) (Chuck72) - 8 cav, LG, GC - Ch folks at gm ail dot com
    17) (jimlj) - 8 cavity aluminum, NLG +Handles - jimlj at g mail d0t c0m
    18) (Dimner) 8-cav, grooved, GC, + handles - dimner at gmail dot com
    19) (ballistim) - 8 cav SOLID, LG, GC - bALLiStiM(at)YaHoO(dot)CoM
    20) (pjh42) - 8 cavity solid with grooves and gas check- orig in al pjh 421 at g mail . co m
    21) (bamabound) -8 cav alum flat based, NLG +Handles - zac alldredge at gmail dot com
    22) (zeljohn) - 8 cav Solid w/grooves, GC - zeljohnatcenturylinkdotnet
    23) (historicfirearms) - 8-cav lube groove, GC - nomadpilot77 at gmail dot com
    24) (pack3480) - 8 cavity NLG Aluminum +handles - dcasad(at)hotmail(dot)com
    25) (klobbermeister) -8 cav alum, NLG, +handles - klobbermeister at ameritech dot net
    26) (btreanor) 8-cav, solid, GC - b t r e a n o r at h o t m a i l . c o m
    27) (bushog) -8 cavity SOLID with Lube Groove and Gas Check - boo-haaa at hot maildot com
    28) (cainttype) - 8 cav Alum, FB - drctml AT yahoo Dot com
    29) (Ep55555) - 8 cav Alum, FB, NLG - Mighty_orion (at) Hotmail.com
    30)
    31)
    Last edited by Lakehouse2012; 08-10-2022 at 08:55 PM.

  2. #2
    Boolit Master flyingmonkey35's Avatar
    Join Date
    Apr 2014
    Location
    Utah
    Posts
    1,414
    74 grains as an HP NLG

    Largest cav available




    Sent from my SM-G960U using Tapatalk

  3. #3
    Boolit Master
    slide's Avatar
    Join Date
    Jul 2011
    Posts
    1,043
    One eight cavity solid,NLG, flat base aluminum bennyritteratyahoodotcom.
    Last edited by slide; 03-20-2020 at 08:15 PM.
    Boolits !!!!! Does that mean what I think it do? It do!

  4. #4
    Boolit Master
    Join Date
    Mar 2014
    Location
    St. Louis
    Posts
    2,028
    How much money are they gonna be?

  5. #5
    Boolit Master
    Join Date
    Jan 2014
    Location
    Ft Worth, Texas
    Posts
    634
    I'll throw in for a brass 3 cavity go NLG gas check

    Sent from my moto g(7) power using Tapatalk

  6. #6
    Boolit Master Dapaki's Avatar
    Join Date
    Jan 2020
    Location
    Minne-Snow-Ta!
    Posts
    600
    76 grains as a Solid NLG flat base - 8-cav Aluminum, please! spamento at gmail dot com
    Last edited by Dapaki; 04-22-2020 at 10:53 AM.

  7. #7
    Boolit Master
    Join Date
    Mar 2014
    Location
    St. Louis
    Posts
    2,028
    Again, how much are the molds gonna be?

  8. #8
    Boolit Master
    slide's Avatar
    Join Date
    Jul 2011
    Posts
    1,043
    Lakehouse2012 is the honcho. You might send him a pm
    Boolits !!!!! Does that mean what I think it do? It do!

  9. #9
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by sigep1764 View Post
    Again, how much are the molds gonna be?
    sigep1764- The price has been left off intentionally, until I get a response from Miha on:
    1) how many cavities he is willing to machine, and on which blocks.
    2) what that actual cost will be.

    Many of us have SIGNIFICANTLY more time to watch this site, I get it, but Miha is still running his business, and family amid this current world-wide situation. So you're gonna have to be patient.

    As soon as the numbers are given to me, I will post them.

    Lakehouse2012

  10. #10
    Boolit Buddy
    John Wayne's Avatar
    Join Date
    Jun 2012
    Location
    Atlanta Georgia
    Posts
    479
    d r o b e r tsk at gm ail dot c om Aluminum 8 cavity with lube grooves, solid, gas check. Thanks! Can we add handles too?
    Last edited by John Wayne; 04-06-2020 at 07:53 PM. Reason: adding handles
    HOLLYWOOD Collector Left hawg 405#, right one 315#, had my elderly neighbors granddaughter treed and why I got the call. Both charged, one from 20' and one from 40'. Thanks to the good Lord and Samuel Colt I won. May God bless our Lawmen & Soldiers!

  11. #11
    Boolit Buddy dimaprok's Avatar
    Join Date
    Mar 2017
    Location
    Evergreen state
    Posts
    424
    Wouldn't a solid bullet with no lube groove weight more than one WITH lube grooves? Is this a typo or the bullet is shorter and lighter?
    75 grains as a Solid w/grooves
    66 grains as a Solid NLG

  12. #12
    USMC 77, USRA 79


    Markopolo's Avatar
    Join Date
    Jul 2017
    Location
    Remote island in SE Alaska
    Posts
    2,998
    i would like the 3 cav brass gas check HP with groves version please... f i g e l s k i at y a h o o
    Last edited by Markopolo; 04-10-2020 at 06:45 PM.
    Any technology not understood, can seem like Magic!!!

    I will love the Lord with all my heart, all my soul, and all my mind.

  13. #13
    Boolit Buddy Iron369's Avatar
    Join Date
    Jul 2017
    Location
    Louisville KY
    Posts
    300
    8-cav aluminum fb nlg hp.
    ironj369 at gmail dot com

  14. #14
    Vendor Sponsor

    MiHec's Avatar
    Join Date
    May 2008
    Location
    Europe
    Posts
    2,500
    Working on this one......
    www.mp-molds.com
    --------------------------------------
    If you want to win, you must not lose

  15. #15
    Vendor Sponsor

    MiHec's Avatar
    Join Date
    May 2008
    Location
    Europe
    Posts
    2,500
    I'm going to ask Miha if 7 cavities would fit in the 6-cav block, and 9-cav would fit in the 8-cav Aluminum
    Sorry, no go
    www.mp-molds.com
    --------------------------------------
    If you want to win, you must not lose

  16. #16
    Boolit Buddy
    Join Date
    Dec 2010
    Location
    Holden Ma
    Posts
    177
    I’m definitely in for a 3 cav GC lube groove HP . I might get a second HP PB or maybe a 5 cav just have to see how things play out but definitely the 3 cav GC LG HP .... thadd3220 at yahoo dot com

  17. #17
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Guys,

    I just spoke to Miha, and have made changes to this GB. See text in RED, these will be the only blocks available.

    Thanks,

    LH

  18. #18
    Boolit Buddy Iron369's Avatar
    Join Date
    Jul 2017
    Location
    Louisville KY
    Posts
    300
    I guess I’m out then.

  19. #19
    Boolit Bub
    Join Date
    Apr 2015
    Posts
    57
    Aluminium 8-cav, solid, lube groove, plain base please!

    kawacharles1973 at g mail dot com

  20. #20
    Boolit Master Dapaki's Avatar
    Join Date
    Jan 2020
    Location
    Minne-Snow-Ta!
    Posts
    600
    How we doin on this group buy?

Page 1 of 15 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check