Titan ReloadingLoad DataRotoMetals2PBcastco
WidenersLee PrecisionMidSouth Shooters SupplyReloading Everything
Repackbox Inline Fabrication
Page 3 of 20 FirstFirst 12345678910111213 ... LastLast
Results 41 to 60 of 399

Thread: ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round

  1. #41
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Quote Originally Posted by AlHunt View Post
    How many buyers does this one need before it goes to production?
    technically its 25 of the HP molds, but Im working with Miha on getting him to combine the 65g and 75g because they would use the same HP pins. If this works out, there are enough to take this in to last call.

    However- Miha hasnt returned my call yet, for us to finalize this. I'll try him again tomorrow. Stay tuned.

  2. #42
    Boolit Mold
    Join Date
    Nov 2017
    Posts
    11
    Is it possible to scale the design down to .224 in soft lead?

  3. #43
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Master Samwise - Thanks for the PM to remind me to update your molds, I've added you in on both of them.

    Regarding the BB with the NLG (I may have already answered, but just in case) When Miha runs a secondary cutter into the mold, to remove the lube grooves, it also removes any bevel that may exist. Sorry but with this GB I cant offer a BB.

    Quote Originally Posted by Master Samwise View Post
    ( Master Samwise ) - Brass 3 cav, NLG, HP , (Flat base)
    - shonnold at hot mail dot com

    ( Master Samwise ) - 8 cav, NLG, (Flat base)
    - shonnold at hot mail dot com

    *Disregard please* ANY CHANCE OF A SLIGHT BEVELED BASE ON THESE? I sometimes a get a little burr on my plain base and it drives me crazy.

  4. #44
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Send me a PM with what you are trying to accomplish please. This mold will easily size down to .224, whether you use soft or hard lead.

    Likewise, if you pour 99% PB you will automatically get smaller bullets due to shrink. But I'm not certain why you would want to run pure in a higher powered load. Send that PM and we can talk more offline.

    Quote Originally Posted by Lion2017 View Post
    Is it possible to scale the design down to .224 in soft lead?

  5. #45
    Boolit Mold
    Join Date
    Dec 2015
    Posts
    7
    Please add me to the list for a brass 3-cavity, NLG, FB
    tmain99 at g mail dot com.

  6. #46
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Great, I've added you to the list, thanks!!

    Quote Originally Posted by 2manyToys View Post
    Please add me to the list for a brass 3-cavity, NLG, FB
    tmain99 at g mail dot com.

  7. #47
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    Were you able to combine the 75 and 65 grain mold orders?

  8. #48
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    I spoke with Miha last week and have the question into him, he was going to check the geometry and get back to me. But Europe is on Holiday until next week, so I dont expect to get a response until sometime next week. I promise, as soon as I get an answer I'll let you all know.

    BTW- I see your post on the other thread, you need to put a disguized email on your post. Will you edit please and add that in and I'll add you to the list.

    Thanks,
    Lakehouse2012

    Quote Originally Posted by Dimner View Post
    Were you able to combine the 75 and 65 grain mold orders?

  9. #49
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    Quote Originally Posted by Lakehouse2012 View Post
    I spoke with Miha last week and have the question into him, he was going to check the geometry and get back to me. But Europe is on Holiday until next week, so I dont expect to get a response until sometime next week. I promise, as soon as I get an answer I'll let you all know.

    BTW- I see your post on the other thread, you need to put a disguized email on your post. Will you edit please and add that in and I'll add you to the list.

    Thanks,
    Lakehouse2012
    oh der... of course. I will do that now. thanks for the heads up on that.

  10. #50
    Boolit Mold
    Join Date
    Nov 2017
    Posts
    11
    please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com

  11. #51
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Quote Originally Posted by Lion2017 View Post
    please: 1 brass 6 cavity solid grooves GC herrgiessviel at gmail.com
    Thanks Lion, Ive added you to the list

  12. #52
    Boolit Master

    Plate plinker's Avatar
    Join Date
    May 2012
    Location
    Indiana
    Posts
    2,295
    2 - 8 cavity NLG
    plateplinker @ gmail dot com

  13. #53
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Thanks, I've got you on the list twice.

    Quote Originally Posted by Plate plinker View Post
    2 - 8 cavity NLG
    plateplinker @ gmail dot com

  14. #54
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    Can I be a pain and ask you to switch me from the 8 cav aluminum to the 6 cav brass for both of my molds? Let me know if you want me to update my original post. Thanks!

  15. #55
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    No worries, I've modified yours. Yes will you now modify your original post, just so I can keep my records straight. Thanks!!

    Quote Originally Posted by Dimner View Post
    Can I be a pain and ask you to switch me from the 8 cav aluminum to the 6 cav brass for both of my molds? Let me know if you want me to update my original post. Thanks!

  16. #56
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    original post updated. thanks again

  17. #57
    Boolit Buddy jessdigs's Avatar
    Join Date
    Jan 2017
    Location
    The people's republic of Commifornia, in Somerset
    Posts
    233
    I do want handles and forgot to indicate that in this GB. Is that something that gets added when we pay, or do I need to indicate that when signing up like In the 47-70 pinker? New to GB, thanks


    Sent from my iPhone using Tapatalk Pro

  18. #58
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    no problem, just tell me how many you want. I see you are signed up for a solid and an HP. I put you on for a set with the HP, let me know if you want another set for the solid.

    Quote Originally Posted by jessdigs View Post
    I do want handles and forgot to indicate that in this GB. Is that something that gets added when we pay, or do I need to indicate that when signing up like In the 47-70 pinker? New to GB, thanks


    Sent from my iPhone using Tapatalk Pro

  19. #59
    Boolit Buddy jessdigs's Avatar
    Join Date
    Jan 2017
    Location
    The people's republic of Commifornia, in Somerset
    Posts
    233
    Quote Originally Posted by Lakehouse2012 View Post
    no problem, just tell me how many you want. I see you are signed up for a solid and an HP. I put you on for a set with the HP, let me know if you want another set for the solid.
    Yes I do, two sets please. One for each

    Sent from my Pixel 4 XL using Tapatalk

  20. #60
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,218
    Sorry so slow- I've modified your request for 2 sets of handles.

    Quote Originally Posted by jessdigs View Post
    Yes I do, two sets please. One for each

    Sent from my Pixel 4 XL using Tapatalk

Page 3 of 20 FirstFirst 12345678910111213 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check