RepackboxWidenersLoad DataRotoMetals2
Lee PrecisionMidSouth Shooters SupplyInline FabricationReloading Everything
Titan Reloading
Page 1 of 20 1234567891011 ... LastLast
Results 1 to 20 of 399

Thread: ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221

    ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round

    LAST CALL on 07MAR2021


    - Casting at .227
    - HP or Solid (you choose)
    - Flat Base or Gas Check (you choose)
    - Grooved or NLG (you choose)
    - Steel sprue plate
    - Hardened steel alignment pins
    - Allen keys are included
    - RCBS/Lyman top punch is included
    - Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
    -Sample of sprue lube is included (15ml)

    Pins included will be at a MINIMUM of: Large round, Small round and a blank pin.

    65 grains as a Solid w/grooves
    66 grains as a Solid NLG
    63 grains as an HP w/grooves
    64 grains as an HP NLG

    The OAL length is 0.656" and top of top driving band Meplat to first band 0.407"

    Click image for larger version.

    Click image for larger version. 

Name:	22 Nato HP.jpg 
Views:	534 
Size:	22.3 KB 
ID:	258850

    Mold Choices and Pricing


    Changes in RED
    - 3-cav Brass for HP (from 2-cav block) --> 85 Euro
    - 6-cav Brass for Solid --> 65 Euro
    - 8-cav Aluminum for Solid --> 65 Euro


    NEW SHIPPING DETAILS

    shipping is approximately 16 euros for first mold.

    If you purchase 2 molds it is 18 euros (for both)

    if you take 3 molds shipping is approx 20 euros....

    Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN

    GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

    Group Buy List

    3 cavity HP (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
    1) (Lakehouse2012) - 3-cav, HP, GC - sorgatz At ameritech d0t net (Honcho mold)
    2) (jessdigs) - Brass 3 cav, HP, NLG, GC +handles - jessdigs at Gmail dot com
    3) (bpatterson84) - 3 cav, HP, GC - rocpyro at gmail. 76116
    4) (Minerat) - 3 cav, HP, NLG, GC - SteveOB at outdrs dot net
    5) (Wasalmonslayer) - 3 Cav brass HP, GC - Max at yvmarine dot com.
    6) (SeabeeMan) - 3 cav, HP, GC +handles - rich underscore kildow at hotmail dot com
    7) (Krh1326) - 3 Cav HP - GC - Krhenrikson at MSN dot com
    8) (Master Samwise) - Brass 3 cav, HP, NLG - shonnold at hot mail dot com
    9) (2manyToys) - 3-cavity, HP, NLG, FB - tmain99 at g mail dot com
    10) (2manyToys) - 3 cavity, HP, NLG, GC - tmain99 at g mail dot com
    11) (huntnman) -3 cav HP, GC - huntnman(at)swbell(dot)net
    12) (Brick85) - 3 cav HP, GC - house of tang at yahoo dotcom
    13) (Teemu) - 3-cavity Brass, Grooved, HP, GC - teelep75 At gmail d0t com
    14) (tja6435) - 3cav, HP, GC, lube groove +handles - Tja6435 at gmail dot com
    15) (davidh0302) - 3 cavity HP NLG flat base mold. +handles - dh03021991 at gmail dot com
    16) (davidh0302) - 3 cavity HP NLG flat base mold. +handles - dh03021991 at gmail dot com
    17) (HiVelocity) - 3 cav, HP, FB - HiVelocityzerothree@Aol.com
    18) (HiVelocity) - 3 cav, HP, NLG - HiVelocityzerothree@Aol.com
    19) (Markopolo) - 3 cav, HP, lube groove, gas check, all pins - f i g e l s k i at y a h o o dot c o m
    20) (KMac) - 3 cav, HP, GC All Pins - kevmcclain at gmail dot com
    21) (coog83) - 3 cavity HP, Grooved, GC - kpatton at take2 dot us
    22) (coog83) - 3 cavity HP, NLG, FLAT - kpatton at take2 dot us
    23) (Double D) - 3 cav, HP, GC - l t c d u g g i n s (AT) gmail dot com
    24) (kywoodwrkr) - 3-cav, HP, GC - kywoodwrkr at yahoo dot com
    25) (bronte454) - 3-cav lube groove, GC, HP +handles - thadd3220 at yahoo dot com
    26) (jmcghee) - 3-cav brass,HP, NLG - jamesallen1954@gmail,com
    27) (Cowhide) - 3-cav Brass, HP all pins, Flat Base, Grooved +handles - mdsleatherworks4u AT gmail d0t com
    28) (kodiakken) - 3-cav lube groove, GC, HP +handles - kodiakken at gmail dot com
    29) (Dieselhorses)- 3 cav HP, NLG, FB +handles - Way2kajun at Yahoo dot com
    30) (Wolfdog91) - 3-cav, HP, NLG, GC - wolfdogmcdowell91 At gmail dot com
    31) (Boomsticks Firearms) - 3 cav HP LG GC - boomsticks firearms at lowcountry dot com
    32)
    33) (Humbo) - 3 Cav brass HP GC w/ lube groove - bardisattva at gmail dot com
    34) (Evoken) - 3-cav HP, GC, NLG, +handles - kshj31 At yahoo dot com
    35) (Coco89) - 3-cav, HP, NLG, - wireless288 gmail
    36) (Moromane) - 3-cav, brass, HP, GC + handles - Moromane1992 at geemail dotcom
    37) (Lion2017) - 3 cav, brass HP, GC - herrgiessviel at gmail.com
    38) (bushog) - 3 cavity HP NLG flat base mold - boo-haaa athot mail dotcom
    39) drfroglegs) - 3-Cav HP, NLG, GC +handles - Drfroglegs at yahoo dot com
    40) (btr-cj) - 3 Cav HP, NLG, FB - btrcjAtCoxDOTnet
    41)
    42)
    43) (OutdoorDave) - 3 cav brass, HP with all pins, GC - little black lab at gmail dot com
    44)
    45)
    46)



    6 cavity Solid (Brass mold) (Lube groove or NLG) with (Flat base or Gas Check)
    1) (jessdigs) - brass 6 cav, NLG, GC +handles- jessdigs at Gmail dot com
    2) (Lion2017) 6 cav, GC - herrgiessviel at gmail.com
    3) (ilium) - 6 cav brass, solid, NLG +handles - iliumconst at gmail dot com
    4) (dimaprok) - 6 cav, GC - dimaprok at gmail dot com
    5) (Steve390Gold6) - 6 cav, GC +handles - Nelson390 at hotmail dot com
    6) (DanInCt) - 6 cav, GC - daneschner at g mail dot com
    7) (gvrj) - 6 cav, NLG, FB - george at rayclan dot net
    8) (blasternank) - 6 cav, Brass Solid NLG Gas check - trockroofingatgmaildotcom
    9) (Stewbaby) - 6 cavity solid GC, +handles - Cstewy96 at gmail dot com
    10) (ryanmattes) - 6 cav Solid NLG +handles - ryanmattes@gmail.com
    11) (Cave) - 6-cav, GC 6cav +handles - j.huntblelectrical At yahoo d0t com
    12) (Whitecobra) - 6 cav, NLG, Flat Base - whitecobra_1997 at msn.com.
    13) (BK7saum) - 6 cav brass, NLG, GC - Bradleyk4860 at gmail dot
    14) (SoonerEd) - 6 cav, lube groove, gas check - Ed at trilogy-health dot com.
    15) (Armorguy63) - 6-Cav, NLG, FB - +handles - kshafer1 At gmail d0t com
    16) (1I-Jack) - 6-cav, GC +handles - nw_trader at hotmail.com
    17) (Ziptar) - 6 cav brass, GC - ziptar at geemail dot com
    18) (hades) - 6-cav brass, GC +handles - Calebwilking at geemail COM
    19) (RogerDat) - 6 cav w/lube grooves, GC - drccac at zoomon,net
    20) (Redline) - 6 cav, NLG, FB +handles - redlinemeister at gmail dot com
    21) (MisterStyx) - 6 cav, NLG, FB +handles - Ryan.Montie at gmail dot com.
    22)
    23)
    24)
    25)


    8-cav (Aluminum mold) (Lube groove or NLG) with (Flat base or Gas Check)
    1) (rancher1913) 8 cav, NLG - rancher1913atyahoodotcom
    2) (millsa2) - 8-cav Alum Solid grooved, GC - millsa2 at comcast dot net
    3) (millsa2) - 8-cav Alum Solid grooved, GC - millsa2 at comcast dot net
    4) (Dapaki) - 8 cav, NLG - spamento at gmail dot com
    5) (Master Samwise) - 8 cav, NLG - shonnold at hot mail dot com
    6) (Plate plinker) - 8 cav, NLG - plateplinker @ gmail dot com
    7) (jwoolley) - 8 cav NLG GC - jwoolley1987 at gmail dot com
    8) (kbstenberg) - 8 cav, Grooved, FB - k b s t e n 1 at a r v i g dot n e t
    9) (Kawacharles) - 8 cav, NLG - kawacharles1973 at g mail dot com
    10) (pjh421) - 8 cav with grooves, GC - originalpjh421 AT g mail dot com
    11) (Olsmoky) - 8 cavity NLG Flat base, + Handles - olsmoky95 at gmail.com
    12) (Olsmoky) - 8 cavity NLG Flat base, + Handles - olsmoky95 at gmail.com
    13) (Lloyd Smale) - 8 cav grooved, GC - lws43 at hotmail.com
    14) (Sleeping Dog) - 8 Solid, GC, NLG - eric at sleepingdogammo dot com
    15) (blasternank) - 8-cav Alum Solid grooved GC - trockroofingatgmaildotcom
    16)
    17) (Mr Poison ivy) - 8-cav, NLG, FB + Handles- Garlandivy at Gmail dot com
    18) (Mr Poison ivy) - 8-cav, NLG, FB + Handles- Garlandivy at Gmail dot com
    19) (greekman) - 8-cav, NLG, FB, 2 sets of handles - greekman1122 at yahoo dot com
    20) (pack3480) - 8-cav Alum solid GC, LG +handles - dcasad(at)hotmail(dot)com
    21) (pack3480) - 8-cav Alum solid NLG, Flat Base +handles - dcasad(at)hotmail(dot)com
    22) (bushog) - 8 cav aluminum solid NLG flat base - boo-haaa athot mail dotcom
    23) (NYBushBro) - 8-cav alum, GC - mopedmedic AT hotmail DOT com.
    24) (drfroglegs) - 8 cav NLG, FB with +handles - Drfroglegs at yahoo dot com
    25) (cainttype) - 8 cav Alum, GC - drctml AT yahoo DOT com
    26) (COUSIN DANIEL) - 8 cav alum, NLG - DanielRiggs2020 At gmail dotcom
    27)
    28)
    29)
    Last edited by Lakehouse2012; 08-03-2022 at 12:25 PM.

  2. #2
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Guys,

    Made changes to block types, see text in RED.

    Thanks,

    LH

  3. #3
    Boolit Buddy
    Join Date
    Dec 2010
    Location
    Holden Ma
    Posts
    177
    Could I get some numbers on this bullet as a HP the length and top of top driving band ? I have a Taurus Raging Hornet that is screaming for a bullet somewhat like this . For some strange reason Taurus chose to put a barrel with a 1in 9 twist .

  4. #4
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by bronte454 View Post
    Could I get some numbers on this bullet as a HP the length and top of top driving band ? I have a Taurus Raging Hornet that is screaming for a bullet somewhat like this . For some strange reason Taurus chose to put a barrel with a 1in 9 twist .
    The OAL length is 0.656" and top of top driving band Meplat to first band 0.407"

  5. #5
    Boolit Buddy Teemu's Avatar
    Join Date
    Aug 2017
    Location
    Finland
    Posts
    213
    Can I have: Brass 3-cav. with lube groove GC/HP. 1 mold. paska_10 AT hotmail.com

    -Teemu
    Thanks

  6. #6
    Boolit Buddy AlHunt's Avatar
    Join Date
    Jan 2020
    Posts
    299
    I'm going to subscribe to this thread. I'm interested in a 3 cavity mold but if but if it takes months and months to pan out I'll forget I've committed.

    ORDERED IT IN POST 18
    Last edited by AlHunt; 06-08-2020 at 04:16 PM. Reason: parallax distortion and indigestion

  7. #7
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Hi Guys,

    I'm watching your posts and see the interest, but I'm waiting to hear back from Miha with the cost, before I start putting folks on the list. Hope to get this info soon.

    Thanks,

    LH2012

  8. #8
    Boolit Buddy hermans's Avatar
    Join Date
    Feb 2011
    Location
    At the Southern most tip of Africa
    Posts
    456
    Lakehouse2012,

    PM inbound

  9. #9
    Boolit Buddy jessdigs's Avatar
    Join Date
    Jan 2017
    Location
    The people's republic of Commifornia, in Somerset
    Posts
    233

    ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round

    I have been waiting for this one.
    I would like 1 brass 3 cavity NLG HP
    And
    1 brass 6 cavity solid NLG

    2 molds
    jessdigs at Gmail dot com

    Sent from my Pixel 4 XL using Tapatalk
    Last edited by jessdigs; 09-04-2020 at 11:46 PM.

  10. #10
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    3,640
    8 cavity SOLID (Aluminum mold) ( NLG) with (Flat base)

    rancher1913atyahoodotcom
    if you are ever being chased by a taxidermist, don't play dead

  11. #11
    Boolit Master
    slide's Avatar
    Join Date
    Jul 2011
    Posts
    1,043
    8 cavity solid aluminum mold, grooved with flat base.
    bennyritteratyahoodotcom
    Boolits !!!!! Does that mean what I think it do? It do!

  12. #12
    Boolit Buddy bpatterson84's Avatar
    Join Date
    Feb 2016
    Location
    Ft Worth, TEXAS
    Posts
    217
    Yea, Id go for a NLG 3 cavity Hollowpoint, flat base. Like was said before, would be interesting for a Hornet.

    rocpyro at gmail. 76116.

  13. #13
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Pricing and shipping information is now updated in post #1. Please review and make sure you are still on board, I am then going to start updating the list of buyers.

  14. #14
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by jessdigs View Post
    I have been waiting for this one.
    I would like 1 brass 3 cavity NLG GC HP
    And
    1 brass 6 cavity solid NLG GC

    2 molds
    jessdigs at Gmail dot com

    Sent from my Pixel 4 XL using Tapatalk
    Jessdigs- I'm updating the list and see you have NLG and GC.... Unfortunately this can't be. If you choose NLG, Miha does a seconday operation, to machine all the grooves out, including the step for the GC. So you wold have to choose between the two.

  15. #15
    Boolit Buddy AlHunt's Avatar
    Join Date
    Jan 2020
    Posts
    299
    Does anyone have an opinion about this bullet stabilizing in a 1:9 twist? I noticed someone on the 75 grain thread thought that 1:9 was too fast for that bullet.

  16. #16
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by AlHunt View Post
    Does anyone have an opinion about this bullet stabilizing in a 1:9 twist? I noticed someone on the 75 grain thread thought that 1:9 was too fast for that bullet.
    The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC

  17. #17
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    I've updated everyone who made a request, so this thread is up to date. However there is one that needs to update their choices.



    Quote Originally Posted by bpatterson84 View Post
    Yea, Id go for a NLG 3 cavity Hollowpoint, flat base. Like was said before, would be interesting for a Hornet.

    rocpyro at gmail. 76116.
    Quote Originally Posted by slide View Post
    8 cavity solid aluminum mold, grooved with flat base.
    bennyritteratyahoodotcom
    Quote Originally Posted by rancher1913 View Post
    8 cavity SOLID (Aluminum mold) ( NLG) with (Flat base)

    rancher1913atyahoodotcom
    Quote Originally Posted by jessdigs View Post
    I have been waiting for this one.
    I would like 1 brass 3 cavity NLG GC HP
    And
    1 brass 6 cavity solid NLG GC

    2 molds
    jessdigs at Gmail dot com

    Sent from my Pixel 4 XL using Tapatalk
    Quote Originally Posted by Teemu View Post
    Can I have: Brass 3-cav. with lube groove GC/HP. 1 mold. paska_10 AT hotmail.com

    -Teemu
    Thanks

  18. #18
    Boolit Buddy AlHunt's Avatar
    Join Date
    Jan 2020
    Posts
    299
    Quote Originally Posted by Lakehouse2012 View Post
    The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC
    Thanks for the response. Powder coat / Gas check over 24.8 of W748 with a 55 grain cast is what I'm loading now. I'm going to jump on board here.

    3 Cavity/Brass/HP/GC - Maine Partnership AT Gmail dot com

  19. #19
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Ok, thanks. you will like this boolit alot I've got you on the list.

    Lakehouse2012

    Quote Originally Posted by AlHunt View Post
    Thanks for the response. Powder coat / Gas check over 24.8 of W748 with a 55 grain cast is what I'm loading now. I'm going to jump on board here.

    3 Cavity/Brass/HP/GC - Maine Partnership AT Gmail dot com

  20. #20
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Hey amigo throw me in for a 3 Cav brass HP GC
    Max at yvmarine dot com.

    Thank you!

Page 1 of 20 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check