Tubal 2000

[1Shirt]

GRAF advertizes Tubal 2000 mfg. by Vectan Powders for $70.00 for 8lb. I can't find any data on it. GRAF says it is an excellent 222/223 powder, and good for cast loads. Need words of wisdom on the stuff based on experiance. Thanks in advance to those who respond to this thread.
1Shirt

[felix]

It's 4198 speed. All Tubal series are single base. I called them and they said they have no more in stock. Might want to try again. ... felix

[1Shirt]

Thanks felix! 1Shirt

[Buckshot]

............From the description in their catalog it sounded like a 4198 speed stuff. I took a chance and bought 32 lbs of it. It is a little less dense then H or IMR 4198 but it is close enough in burn rate to mimic possible lot to lot variations in the other two 4198's.

I tested it load for load in several firearms I had 4198 data on. In some cases it was within single digit average velocity spreads and others no more then maybe 30 fps? I showed the data to a buddy and he said, "Those Frogs stole our 4198!" 8).

If you do a search on this forum for Tubal 2000 (I call it T2K) you should see the post.

Yup, just did a search using Tubal 2000 and came up with all the data I'd posted since July. The most is located at: http://castboolits.gunloads.com/show...ght=Tubal+2000

....................Buckshot

[1Shirt]

Thanks Buckshot. Will give er a look see!
1Shirt