I'm looking for something like this for my Hi cap 380. I love my other 8 cavity MP Molds. Can anyone point me toward the right direction?
Thanks.
Matt
I'm looking for something like this for my Hi cap 380. I love my other 8 cavity MP Molds. Can anyone point me toward the right direction?
Thanks.
Matt
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
Ummmm, After you call or write the folks at MP, let us know how many cavities they can cut, and the cost. Do consider a double sided mold with two sprue plates.
https://www.mp-molds.com/product/356...o-lube-groove/
I don’t think they went under 115grs in 9mm. I am using a 122grs in my Astra 300 9x17 (.380)
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
We are currently looking into other options too but right now we have 6 molds requested.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
I have requests for a quote to 6 mold makers now. I have 10 people who want molds.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
Miha made a 104 gr hp mold before. I can send you a pic of them if you want. Might get a honcho to start a rerun of the mold.
Sorry I didn’t see the no lube grove. The mold I was talking about has a lube grove. Sorry.
PMI pistol range USMC 85-89
im looking for these contender pistol barrels--> 6tcu,.30herrett
barrels i have-->.221 fireball,7-30 waters,7tcu,.357 herrett,.44 mag,6.5tcu
There's only 2 people in this world i trust, one of them is me the other one's not you...
A lube groove is not a deal breaker for me. If it adds versatility and more people join that's fine.
11 people interested. That's $78 per mold.
Last edited by strobro32; 02-20-2020 at 05:09 PM.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
Miha has 3 in stock. 4 bangers. Mp molds website. Sku is 10093
It says 93 grain as hollowpoint but mine were little over 100.
PMI pistol range USMC 85-89
im looking for these contender pistol barrels--> 6tcu,.30herrett
barrels i have-->.221 fireball,7-30 waters,7tcu,.357 herrett,.44 mag,6.5tcu
There's only 2 people in this world i trust, one of them is me the other one's not you...
I have a member who is sending me some flat nose to tests. If the "ranch dog" profiles work I may end up with a Lee .356 -95 FN "ranch dog" 6 -cavity.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
The 95 grain 6 cavity bullets Lee worked great. I have purchased the mold. I hope Lee eventually makes the RN 6 cavity.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
IHMSA # 566 "time sure flies when you're having FUN"
Yes. I've cast, powder coated and loaded 3K now of the Lee 95 FN. I shot about 600. It works very well in my host about %98-99, but not as reliable as the RN.
I'm about to cast and try some MP 115 grain. The OAL is 1". It should fit the 30 round mags.
If it doesn't splatter, shatter, burst, boing or explode...it's probably not worth shooting.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |