350 Legend and Cast Boolits

[Russel Nash]

Does anybody here know what the individual parts are needed for the Dillon 650 or 750 conversion kit?

I already reload .223 Remington (5.56 basically) on a Dillon 650. Here are the parts for that:

Attachment 329204

So the following parts are in common with the .350 Legend:

1. Shellplate
2. Brass locator pins (times 3)
3. The Station #1 locator
4. Case Feeder arm bushing small pistol, green plastic
5. Case Feeder body bushing, small, threaded and silver

I would think that the only thing I would need for .350 Legend is that Case Feed adapter (for .223 it is a white plastic tube), and the powder funnel (normally for straight walled pistol brass, the funnel also expands or bells the case mouths).

Dillon wants $115 for the full .350 Legend conversion kit for the 650.

I am not paying $115 for a little plastic tube and a powder funnel (because I have all the other parts already)

Just as an FYI….that pic is a screen shot for the Dillon conversion:

https://www.dillonprecision.com/medi...sion-chart.pdf

There is no .350 Legend listed there.

Thanks in advance!

[max it]

Dillon has this website: www.reloader.com , i bet its there. maybe, maybe not.

[Russel Nash]

Dillon has this website: www.reloader.com , i bet its there. maybe, maybe not.

Thank you sir!

I totally forgot about their forum.

I was on there about 6 months ago when I was having issues with my SL900 in 12 gauge with 3/4 ounce loads.

[cwlongshot]

Anyone have the Accurate 35-195RG mold?

CW

[Russel Nash]

I found an answer to my Dillon powder measure question.

It is the “D” funnel which is the same used for .38 Special/.357 Magnum reloading.