RepackboxTitan ReloadingRotoMetals2Reloading UK
ADvertise hereMidSouth Shooters SupplyLee Precision

Results 1 to 13 of 13

Thread: The "Do it all" 454424

  1. #1
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,294

    The "Do it all" 454424

    For your consideration here is a "smart" version of the 454424 cast bullet. This one will have 3 hollowpoint options as well as 3 hollow base cavity options. You can't have both in one mold so you have to decide which way you want to go. What sets this cast slug apart is for those who have oversize cylinder throats in their 45 this mold will allow you to "tailor" your hollow base so that it will slug up just so for your particular application.

    The Hollow Point option cannot be combined with the hollow base option. There will be 3 HP pins included with your mold. Large, cup, or Penta point pins will be included. The drawing gives you the weights for the various pins as well as the nose to crimp dimension and the meplat.

    Sign up like usual. I realize we are on the tail end of Summer and guys (except the dove hunters) are not quite starting to gear up for hunting season but we are going to get an early start here. As always please sign up in the following format so I can simply cut at paste. Do not get fancy with your email address because if Miha asks me to decipher it for him I am not likely to have time to do it. So if you will please just post it like this:

    castslughooter AT polka DOT com

    This mold will be available in 2 or 4 cavity brass blocks. I also need you to tell me how many cavities as well as how many molds. If you leave something off and get a message from me, please go back and do another post with all the correct information so I do not have to go hunt your original post down. Otherwise again, I may not have time to correct your omission. I will post prices as I get them from Miha. I suspect due to the required pin count this mold might run for some time.


  2. #2
    Boolit Master
    Join Date
    Jan 2011
    Location
    Nebraska
    Posts
    1,128
    One mold, 2 cavity, hollow point
    mjones23 AT neb DOT rr DOT com

  3. #3
    Boolit Grand Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,415
    One mold, 4 cavity, hollow point

    shutupandjump AT yahoo DOT com
    KE4GWE - - - - - - Colt 1860, it just feels right.

  4. #4
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,294
    2 molds. There are a significant number of sixguns out there that need this cast slug design. I have a 1917 45 ACP with .455” throats. It’s a perfect candidate.

  5. #5
    Boolit Master

    Join Date
    May 2012
    Location
    South Texas
    Posts
    1,285
    Elmer Keith knew what he was doing when he designed his line of bullets!

  6. #6
    Boolit Master
    Lefty SRH's Avatar
    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    2,153
    How can we see some more bullet dimensions? Im interested in the diameter of the nose just above the front driving band.
    "In GOD We Trust"

  7. #7
    Boolit Buddy JAC43's Avatar
    Join Date
    Jan 2012
    Location
    PHX, AZ
    Posts
    118
    One mold 4 cavity brass HP .454 dia
    Tippieacdo AT aol DOT com

  8. #8
    Boolit Buddy JAC43's Avatar
    Join Date
    Jan 2012
    Location
    PHX, AZ
    Posts
    118
    Bumping this back up, Id like to eventually complete my 45 SWC collection from MP.

  9. #9
    Boolit Master


    Join Date
    May 2015
    Location
    Anchorage, AK
    Posts
    1,019
    I'm in. 4 Cav HP. G P Spero 64 @ G mail dot com

  10. #10
    Boolit Bub
    Join Date
    Jul 2009
    Location
    Texas
    Posts
    35
    One mold, 4 cavity, hollow point
    235 gr large HP
    oldhippiehouston AT gmail DOT com

    And what about the top punch?
    Is that included or extra?
    Last edited by robertmcw; 09-16-2021 at 06:40 AM.

  11. #11
    Moderator Emeritus

    georgerkahn's Avatar
    Join Date
    Sep 2013
    Location
    South of the (Canada) border
    Posts
    1,865
    I shall wish to purchase:
    ONE 2-Cavity Hollow Point Mould
    and (hopefully)
    ONE set of handles
    Georgerkahn
    kahngr AT potsdam DOT edu

  12. #12
    Boolit Master oldhenry's Avatar
    Join Date
    Mar 2016
    Location
    Albany, GA
    Posts
    729
    I'm in for a 2-Cavity HP mold with all pins.
    hhwadkinsiii at aol dot com
    Last edited by oldhenry; 09-24-2021 at 09:39 AM.

  13. #13
    Boolit Bub
    Join Date
    Apr 2015
    Posts
    40
    One mold, 4 cavity, hollow point
    dearborn416 AT yahoo DOT com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check