Load DataInline FabricationLee PrecisionReloading Everything
RotoMetals2Titan ReloadingRepackboxWideners
MidSouth Shooters Supply
Page 1 of 7 1234567 LastLast
Results 1 to 20 of 127

Thread: ACTIVE: MP Molds 3118 Brass Cramer PB or GC mold

  1. #1
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306

    ACTIVE: MP Molds 3118 Brass Cramer PB or GC mold

    MP Molds 3118 3 Cavity Brass Cramer Plain Base or Gas Check mold Hollow Point mold on the two cavity blocks or a 6 cavity brass solid PB or GC on the four cavity blocks or an 8 cavity solid PB or GC on the aluminum blocks. This is an old Group Buy mold from the Lee era. The dimensions were taken from an old very accurate Ideal mold. This should be "ideal" for all the 32 caliber pistol shooters. It should cast at 0.314" dependent on your alloy and easily sizes smaller. The weight is as shown on the drawing dependent on your alloy of choice.

    We will run this (on 2 forums) until we get the number we need (probably 34 HP molds due to current supply conditions) or more, then it is up to MiHec to decide when to make it........ it can be a long time.... be warned and no whining.

    I am offering these choices: Brass 3 cavity PBHP, Brass 3 cavity GCHP, Brass 6 cavity PB solid, Brass 6 cavity GC solid, Aluminum 8 cavity PB solid and Aluminum 8 cavity GC solid.

    Pins included are: For the Hollow Point Molds are 1) Large HP pin, 2) Medium Penta HP pin, 3) Cup HP pin, 4) Blank pin for a flat nose or in the case you don't want HP pins sticking out the mold.

    Prices are:
    3 cavity cramer HP's on two cavity brass blocks (110 euros shipped full price) - 93,5 euros with 15% off
    I will have to get the other prices.

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec or contacting MP Molds directly . Invoices will be sent out via e-mail from the listed e-mail addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars dependent on the time that occurs. After you pay, the mold gets shipped.

    Prices are somewhat variable due to the exchange rate.... be aware of this.

    Post your disguised e-mail address (imashooter AT gmail DOT com), mold choice, number of cavities, base style (PB or GC) and number of molds wanted (one to however many).



    3 cavity brass Plain Base

    01. eagle-rain AT cox DOT net....1 mold
    02. thadd3220@ yahoo dot com....1 mold
    03. Mchurdii@yahoo dot com....1 mold
    04. huntnman at swbell dot net....1 mold
    05. teelep75@gmail.com....1 mold
    06. ieharm AT hotmail DOT com....1 mold
    07. johnsmiles1961 at gmail dot com....1 mold and 1 set of handles
    08. tomgarcia15 at yahoo dot com....1 mold
    09. lodagener at gmail dot com....1 mold
    10. tward91574ataol.com …..1 mold
    11. geoffsmiller826 AT gmail DOT com....1 mold
    12. mrsparkman at mrsparkman dot com....1 mold
    13. ryulick at gmail dot com....1 mold
    14. kc2skg AT gmail DOT com...1 mold and 1 set of handles
    15.
    16. js DOT graham at mindspring DOT com....1 mold
    17. dbn dot grizz at gmail dot com....1 mold
    18. jeepers2 AT citlink DOT net....1 mold
    19. Red old spot at Gmail dot com....1 mold with handles
    20. 45public at gmail dot com....1 mold
    21. 6shot AT yahoo DOT com....1 mold

    3 cavity brass Gas Check

    01.
    02. Redoldspot at gmail dot com....1 mold and 1 set of handles
    03.
    04. xp30br at gmail.com....1 mold
    05. Steveob at outdrs dot net....1 mold
    06. dgd dOt 72 dOt 2011 aT Gmail dOt cOm.....1 mold
    07. gmfowler2 AT gmail DOT com....1 mold

    6 Cavity Brass solid with GC

    01. dragon813gt at yahoo dot com.... 1 mold
    02. dcasad(at)hotmail(dot)com....1 mold and 1 set of handles
    03. LorgioDOTbarreroATgmailDOTcom....1 mold

    6 Cavity Plain Base Solid

    01. dragon813gt at yahoo dot com ….1 mold
    02. dcasad(at)hotmail(dot)com....1 mold and 1 set of handles
    03. hplongrange at gmail dot com....1 mold
    04. 314livewire at comcast dot net....1 mold
    05. flyinglead1975 AT yahoo dot com.... mold

    8 Cavity aluminum mold plain base

    01. winchester1873jjg at gmail dot com....1 mold
    Last edited by 2 dogs; 09-12-2022 at 04:01 PM.

  2. #2
    Boolit Buddy
    Join Date
    Jul 2009
    Location
    CT
    Posts
    110
    I would be interested in a brass 3 cavity PBHP, one mold, eagle-rain AT cox DOT net

  3. #3
    Boolit Buddy
    Join Date
    Dec 2010
    Location
    Holden Ma
    Posts
    177
    I would be interested in a 3 cavity PBHP . Email is thadd3220@ yahoo dot com

  4. #4
    Boolit Bub OKMike's Avatar
    Join Date
    Jan 2014
    Posts
    34
    Put me down for a brass 3 cavity PBHP. Mchurdii@yahoo dot com

  5. #5
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    I would be interested in a total of two molds.

    1) brass 3 cavity PBHP, one mold,
    2) brass 3 cavity GCHP, one mold,


    dimner AT gmail DOT com

  6. #6
    Boolit Buddy Teemu's Avatar
    Join Date
    Aug 2017
    Location
    Finland
    Posts
    213
    Can I have one, 3-cavity brass PBHP
    Thanks.
    paska_10 AT @ hotmail DOT com

  7. #7
    Boolit Buddy
    Join Date
    Dec 2010
    Location
    Holden Ma
    Posts
    177
    Anything going to happen with this ?

  8. #8
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306
    Quote Originally Posted by bronte454 View Post
    Anything going to happen with this ?
    Yes Sir, we are active and my spies tell me we are getting close.....

  9. #9
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306
    Updated to reflect 6 molds. There are currently 17 molds on the other forum. So we are close to getting this one ready to close. I believe 10 more molds on both forums would do it for us.

  10. #10
    Boolit Bub
    Join Date
    Apr 2019
    Posts
    55
    I'd like a 3-cavity Brass PBHP - ieharm AT hotmail DOT com

  11. #11
    Boolit Grand Master

    Join Date
    Jun 2013
    Location
    NW GA
    Posts
    7,243
    3 cav brass PBHP tom gar cia 1 5 at yahoooooo dot com

  12. #12
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306
    updated to 9 molds

  13. #13
    Boolit Mold
    Join Date
    Feb 2016
    Posts
    16

    MP Molds 3118

    I'll take one mold: Brass 3 Cavity PBHP Renegado at twc dot com

  14. #14
    Boolit Bub
    Join Date
    Apr 2019
    Posts
    55
    I see I'm listed for two of these - pretty excited about it but still should only be down for one.

  15. #15
    Boolit Master



    ddixie884's Avatar
    Join Date
    Jul 2005
    Location
    Avery, Texas
    Posts
    1,309
    Nice..............
    JMHO-YMMV
    dd884
    gary@2texastrucks.com
    Gary D. Peek

  16. #16
    Boolit Buddy
    Join Date
    Oct 2010
    Location
    Arizona
    Posts
    308
    Currently signed up on the other forum. This is the ultimate 32-20 bullet. Crimp groove has been added in the exact location to maintain proper OAL in 1873 & 1892 Winchester’s. Could also be sized down for a variety of 30 caliber cartidges. Really looking forward to loading and testing this offering.
    Rick

  17. #17
    Boolit Buddy
    Join Date
    Aug 2010
    Location
    San Antonio, Texas
    Posts
    416
    3 cav HPGC brass all pins 1 mold. dale1 at idworld dot net

  18. #18
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    S.E. Michigan
    Posts
    414
    Quote Originally Posted by Rick B View Post
    Currently signed up on the other forum. This is the ultimate 32-20 bullet. Crimp groove has been added in the exact location to maintain proper OAL in 1873 & 1892 Winchester’s. Could also be sized down for a variety of 30 caliber cartidges. Really looking forward to loading and testing this offering.
    Rick
    I'm buying this for my savage1899 in 303 sav, my sav340 in 30wcf, and my 1903a4. This profile at .312 has worked great in all 3 formats. I can't wait for some HPs to try!

  19. #19
    Boolit Buddy
    Join Date
    Oct 2010
    Location
    Arizona
    Posts
    308
    That’s the beauty of this particular bullet. The ultimate 32-20 design that can be also be sized and used in all the 30 caliber cartridges. Should work great in a 30-30. Looking forward to trying it in a 30 Carbine. Hope it feeds. Also waiting to try this design in the 30 caliber Contender barrels also.
    Rick

  20. #20
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306
    Updated 10 molds

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check