$21 press with casefeeder zipper cover

[psychbiker]

I’ve got a dillon 650 and don’t want nosy neighbors to see a big blue piece of machinery. The dillon cover seemed too much at $50 and reviews were bad.

Came across a board post that had a user using a Home Depot bbq smoker cover for $11. I got it and it works but hard to put on because there’s no zipper. LIGHTBULB went off and I came across sew own zippers BUT I don’t have a sewing machine and my sister is back logged. So adhesive zipper hit me while on amazon.....then I remembered seeing those zipper doors at Home Depot for spray booth etc.

I present you a $21 zipper cover. It works great. Only thing I noticed it after it’s on and the seem is cut, you have to cut away the excess on both side of the zipper or it will snag.




https://www.homedepot.com/p/Dome-Smo...0106/206303986

https://www.homedepot.com/p/Homax-7-...3142/206526231

[onelight]

Good idea that Dilllon takes a big cover.

[bullet maker 57]

Great idea, why didn't I think of that. I may steal your idea. Hold off on the copyright if you would(LOL).

[jmorris]

I’m not sure what the big pillow case cost that I use but I think it was free.

I would caution against a cover that doesn’t “breathe” as you will risk condensation and subsequent rust on steel parts. Might as well use a trash bag at that point.

[psychbiker]

I’m not sure what the big pillow case cost that I use but I think it was free.

I would caution against a cover that doesn’t “breathe” as you will risk condensation and subsequent rust on steel parts. Might as well use a trash bag at that point.

The 18" diamete hole on the bottom likely a good source of fresh air to combat any possible condensation I imagine.