ACTIVE: MP Molds 44 SLEDGE Hammer 432-310 WFN Cramer (44 MAG, 444 Marlin)

[bluejay75]

SB,

That’s the 270 Hammer that’s sold out. If you want one of those PM me.

[S.B.]

No. I'll stick with what I've already asked for, please?
Steve

[Gamsek]

New design, needs new cherry? If that is so, I would not expect anything moving towards “closed” before 25 moulds or more. Just guessing and we all know some designs will never have enough participants and for those who have, it takes some time....

[phaessler]

I would not expect anything moving towards “closed” before 25 moulds or more.

It is available on other forums group buys also BTW..... not sure what their numbers are, but it should help get to "25"...

https://singleactions.proboards.com/...-variations-gb

[Gamsek]

[QUOTE=phaessler;5098469]It is available on other forums group buys also BTW..... not sure what their numbers are, but it should help get to "25"...


You are right, close to 15 now. Being in few GB I know nothing will move before 25, just not viable. It’s a terrible (read wonderful design !) and I wish it gets done. Need more bumps for more attention!

[bluejay75]

[QUOTE=Gamsek;5098475]

It is available on other forums group buys also BTW..... not sure what their numbers are, but it should help get to "25"...


You are right, close to 15 now. Being in few GB I know nothing will move before 25, just not viable. It’s a terrible (read wonderful design !) and I wish it gets done. Need more bumps for more attention!

I actually want the 225 variant. Cant think of a more perfect 44 Special Boolit! I wanted him to just increase the length of the bottom band to get to 300, but Bob wanted one cherry to cut every possible variant. I could see this happening more often than not. Can cut 3 different boolits from one cherry. Pin dimensions are the same except for height. Very sound system.

[rcn11thacr]

If this is still open, can I get a 240 variant, brass 2 cavity, NLG, all pins.
Redoldspot at gmail dot com

[bluejay75]

If this is still open, can I get a 240 variant, brass 2 cavity, NLG, all pins.
Redoldspot at gmail dot com

I wish it were that easy good sir. If you want a variant it has to be a solid. The HP version of the variants will run as individual group buys as they will require a different length pin.

[06ackley]

Can I get a .434 310gr hp gc with all pins please. 2 cavity

[bluejay75]

Can I get a .434 310gr hp gc with all pins please. 2 cavity

Need a disguised email please sir.

[06ackley]

Need a disguised email please sir.

Jralston442 at gmail dot com

[AZBrian]

Hi, bluejay75. I like to be added for:

brian.dinse at yahoo dot com - HP - .432 - 4 CAVITY - PB NLG (no lube groove) - 85286 + HANDLES

Thank you!

[Landric]

Put me down for a 2-cavity, Plain Base, Solid, .434, Brass, Landric at aol dot com, ZIP 27510.

Note: I saw 2 cavity brass solid on the list for another buyer. If that isn't available, then I will go with a 4 cavity brass solid.

Thanks!

[MrWolf]

I am in for 4 Cavity HP .434 GC all Pins and one set of handles
ryulick at gmail dot com 25434 zip

Thanks

Ron

[bluejay75]

Updated and SOLID ONLY options added for 225 and 240 grain molds. We will have to wait on the HP versions of these molds but with the diameter to meplat ratio being what it is...do you really need a HP? For us recoil shy handgun guys, the 225 or 240 looks to be a winner.

[Landric]

Put me down for a 2-cavity, Plain Base, Solid, .434, Brass, Landric at aol dot com, ZIP 27510.

Note: I saw 2 cavity brass solid on the list for another buyer. If that isn't available, then I will go with a 4 cavity brass solid.

Thanks!

You have me on the list for HP, please change it to 310 Solid. Thanks!

[bluejay75]

Gotcha changed over

[B.C.Jay]

You can add me for the 240 solid PB. .432 2 cav if available, 4 cav if not.
cjsahlstrom.... yahoo... com

[Buckeye509]

I'd like this 432-310 WFN. I want 310 grn, .432 Plain Base, 2 Cavity, Hollow Point, with all pins. Thanks

c e sample at hotmail dot com

[phaessler]