RotoMetals2Titan ReloadingRepackboxInline Fabrication
Lee PrecisionMidSouth Shooters SupplyLoad DataReloading Everything
Wideners
Page 1 of 16 1234567891011 ... LastLast
Results 1 to 20 of 311

Thread: ReRun - Mihec 359640 158gr HP or 170gr Solid Dual Crimp Groove

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221

    ReRun - Mihec 359640 158gr HP or 170gr Solid Dual Crimp Groove

    LAST Call on 03AUG2020

    MiHec 359640 Cramer HP in 2 or 4-cav HP or 6-cav solid brass or 8-cav solid aluminum.

    Here is the original GB done by the Designer, Bob (45.2.1) http://castboolits.gunloads.com/show...Buy-INTERESTED

    With Miha's permission and a big Thanks to the original designer 45.2.1 we are going to run this group buy again. This is has been run 5 times and everyone has raved about this bullet!!
    It shoots well in everything I have ever shot it in from my N frame to my SP101 and my lever guns. This is a very accurate and great one bullet, for all occasions mold!!!

    This is a dual use 357 boolit, the top crimp groove is for the short N-frame S&W 357 cylinders and the bottom crimp groove is for the 38 Special and long 357 Mag cylinder wheel guns. Meplat to crimp groove is 0.318-in and 0.357-in.” Weight is approximately 158gr HP and 170gr solid. I have a solid version of this mold and it casts 0.359-in with WW and 2% tin. Standard Lee 6 cavity handles will work. Miha also offers his higher quality handles too that can be added to the order.

    Here is a little eye candy to look at from past runs.

    This buy is going to offered in -

    Click image for larger version. 

Name:	359640.jpg 
Views:	607 
Size:	23.3 KB 
ID:	242269

    Cramer Pins included: 1) Large HP, 2) Penta HP, 3) Small HP, 4) Cup HP, 5) Blank pin for flat nose

    - 2 Cavity HP all pins included 95 Euro's (80,75 with discount)

    - 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

    - 6 Cavity solid Brass 95 Euro's (80,75 with discount)

    - 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

    The above prices include discount!

    If there is interest in Hi Tek design we can do that too we will leave it up to demand.

    The price will be converted to dollars at the time of invoicing thru paypal and the discount will be applied then.
    If you do not do paypal contact Miha directly and he will work out the details with you.


    This buy is set up to go into last call at 20 molds and then it will close when Miha calls it. These runs take a while some times and patience is required he has done a lot to speed up production with a bigger facility and more equipment but it is still a time consuming process and let's give him some grace to make these fine molds!
    No one else is producing a Cramer style mold with these kind of options for pins and the price!


    This group buy is set up with a 15% discount it is applied at the time of check out.

    He is still closing out some molds on his web site but those are for in stock molds only to help make room on the shelves......


    Sign up list

    2-cav HP in Brass
    1)
    2) (soflarick) - 2-cav HP all pins - soflarick at bellsouth . net
    3) (saturn) - 2 cavity, HP all pins - saharahg@yahooDOTcom
    4) (dimaprok) - 2 cav, HP, all pins - dimaprok at gmail dot com
    5) (bronte454) - 2 cav, HP all pins - thadd3220 at yahoo dot com.
    6) (BHiggins) - 2 Cav, HP all pins - bhiggins @ bcahs(dot)com
    7) (Hardtail) - 2-cav HP all pins +handles - phett1958 At gmailDOTcom
    8) (xiholdtruex) - 2 cav HP with all pins - xiholdtruex at gmail dot com
    9) (cephas53) - 2-Cav, HP all pins - cephas53 at windstream.net
    10)



    4-cav HP in Brass
    1) (Rancher1913) - 4 cav HP brass - rancher1913 at yahoo dot com - Zip 80701
    2) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
    3) (Lakehouse2012) - 4 cav, HP - sorgatz At ameritech d0t net - Zip 48442 (Honcho)
    4) (pahrumpcaveman) - 4 Ca HP all pins included - m1shooter2 at hotmail
    5) (ryan) - 4 cav HP Brass - dearborn416 AT yahoo DOT com
    6) (spur0701) - 4 cav brass HP, plain base - Jeffery.Thorpe@verizon dot net
    7) (Greg S) - 4 cav Brass, with all pins - gp spero 64 @ g mail dot com - 97302
    8) (glockky) - 4 cavity HP, all pins + handles - twgrubb3 at g mail dot com
    9) (ChuckjaxFl) - Needs 2 sets of pin ONLY of HP pins - (ChuckJaxFL) - chuck dot falls at gmail dot com
    10) (salty dog) - 4 cav HP - va dot griz at gmail dot com
    11) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
    12) (big bore nut) - 4 cav HP all pins, GC in the largest diameter offered - greggoryashley AT yahoo dot com
    13) (Eddie17) - 4 cav HP with all pins, FB - SS fasteddie at m s n dot com
    14) (Stmtrn) 4-cav with all the goodies - Bbenj1967@g maildot com
    15) (Txcowboy52) - 4-cav HP Brass - ricky_taylor62ATYAhooDotcom
    16) (drfroglegs) - 4 Cavity Brass HP with + handles. - Drfroglegs at yahoo dot com
    17) (bushog) - 4 Cavity HP, - boo-haaa at hotmail dotcom
    18) (Pepe Ray) - 4 cav HP with all pins, +Handles - addiel at myottmail dot com
    19) (Andy45) - 4-cavity UP with all pins, plain base - Laszlo nh at Comcast dot net
    20) (Bigbore5) - 4 cav brass hp +handles - Waynehager5 AT gmail DOT com
    21) (Billwnr) - 4 cav, HP with all pins + Handles - sbwarner at nctv dot com.
    22) (cja245) - 4 cav HP mold with all pins, +handles - cja245 at gmail dot com
    23) (Sc0) - 4 cavity HP brass all pins + handle - I v t d i at y a h o o dot com
    24) (dalek) - 4 Cavity HP all pins - raubvogel on gee-mail
    25) (GL49) - 4 cav HP, all pins - larrybohn at ashlandhome dot net
    26) (kingstrider) - 4-cav, hollow point with all pins - overunderhunter at yahoo dot com
    27) (monkey wrangler) - 4 cavity brass HP with all pins - mgehlen mesa At aol dot com
    28) (rototerrier) - 4 cavity brass HP with all pins - p d a n 2 9 9 3 over at the g mail
    29) (Duke3026) - 4cav brass all pins - Duke3026 at gmail
    30) (DanInCt) - 4-cav brass all pins - Dan Eschner at Gm Ail dOT Com
    31) (475AR) - 4 cavity brass with all pins - sddeem AT hotmail Dot com
    32) (Trimjoe) - 4cav brass all pins - joeolin13 at gmail.com
    33) (Bucko) - 4 cav, all pins - laedco58 at gmail.com
    34) (ShootNSteel) - 4 Cav HP all pins - jmakosky16 at g mail dot com
    35) (1I-Jack) - 4 Cav HP all pins included +handles - nw_trader at hotmail
    36) (AZBrian) - 4 cav, HP, NLG +Handles - brian.dinse at yahoo dot com
    37) (CoolHandMoss) - 4 cav brass, all pins +handles - Atobwill at gmail
    38) (RT4406) - 4 cav HP, all pins, NLG - RT4406 at aol dot com
    39) (rcn11thacr) - 4 Cav HP, NLG, +handles - Redoldspot at gmail dot com
    40) (Smokedog2) - 4 cav HP brass, pins +handle - jeffm004 at gmail dot com - Zip 45042
    41) (dperk) - 4 cav, HP, all pins - fuelinjected -at -gmail
    42) (johnfl) - 4 cav, HP all pins - wind 28631 AT gmail dot com
    43) (Double D) - 4-cav HP all the pins - l t c d u g g i n s (AT) gmail dot com
    44) (FLYCUTTER) - 4-cav, HP, FB, w/all pins -RunderscoreKARKatATTdotNET
    45) (TimD) - 4-cav, HP all pins, + HANDLES - kc2skg AT gmail DOT com
    46) (Jlw6636) - 4-Cav HP, all pins, NLG - Jlw6636 @ sc Dot rr Dot com
    47) (Wasalmonslayer) - 4 Cav HP, NLG - Max at yvmarine dot com
    48) (osteodoc08) - 4-cav, HP all pins - t om ga rcia 15 at yahooo Dot CoM
    49) (dg31872) - 4-cav, all pins - dgd dot 72 dot 2011 At g mail dot Com.
    50) (pack3480) - 4 cav HP Brass all pins, NLG +handles - dcasad(at)hotmail(dot)com
    51) (Kelz213) - 4 Cav HP all pins - Spr 02 que at gmail (dot) com
    52) (Keith429421) - 4-cav HP all pins - dannybritton at att . net
    53) (Capt.Red.44) 4 cav, brass, all HP pins, PB +handles - Capt.tipton at G Mail. Com
    54)
    55)
    56)



    6-cav Solid Brass
    1) (redhawk357mag) - 6 Cav, - redhawk357magATgmailDOTcom - Zip 73533
    2) (bushog) - 6 Cavity solid Brass - boo-haaa at hotmail dotcom
    3) (DW475) - 6 cav solid, brass - dcw038 at msn dot com.
    4)
    5)
    6)


    8-cav solid in Aluminum
    1) (ChuckJaxFL)- 8 Cavity Alum - chuck dot falls at gmail dot com
    2) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
    3) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
    4) (KVO) - 8 cav alum, NGL - Bulls (underscore) Eye (underscore) 264 at hotmail dot com
    5) (JAMESGR) - 8 cav alum, +handles - bri1590@charter dot net.
    6) (AZBrian) - 8 cav alun, NLG, +handles - brian.dinse at yahoo dot com.
    7) (pack3480) - 8 cav Solid Alum, NLG +handles - dcasad(at)hotmail(dot)com
    8) (pack3480) - 8 cav Solid Alum +handles - dcasad(at)hotmail(dot)com
    9)
    10)
    11)
    12)
    Last edited by Lakehouse2012; 05-10-2021 at 08:09 PM.

  2. #2
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    This is a dandy design boys!
    Hop on and get yourself one.
    It shoots really well in everything I have tried it in rifle or pistol.
    I have shot if from super mild to super wild and it out performs most other bullet designs I have tried.

  3. #3
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    3,640
    4 cav hp brass, rancher1913 at yahoo dot com, 80701
    if you are ever being chased by a taxidermist, don't play dead

  4. #4
    Boolit Master


    Join Date
    May 2010
    Posts
    2,108
    4 CAV Brass. All Pins. spanglerknives at me dot com
    02719

  5. #5
    Boolit Bub
    Join Date
    Apr 2015
    Posts
    57
    8-Cav Solid Aluminium

    kawacharles1973 at g mail dot com

  6. #6
    Boolit Master hicard's Avatar
    Join Date
    Jan 2007
    Location
    Northern Kalifornia
    Posts
    1,406
    4 CAV Brass. All Pins. hicard21 at outlook dot com
    This country has gone to hell but now there is hope for us.

  7. #7
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Thanks Gentlemen, I've got you on the list.

    Quote Originally Posted by hicard View Post
    4 CAV Brass. All Pins. hicard21 at outlook dot com
    Quote Originally Posted by Kawacharles View Post
    8-Cav Solid Aluminium

    kawacharles1973 at g mail dot com
    Quote Originally Posted by Michael J. Spangler View Post
    4 CAV Brass. All Pins. spanglerknives at me dot com
    02719
    Quote Originally Posted by Wasalmonslayer View Post
    This is a dandy design boys!
    Hop on and get yourself one.
    It shoots really well in everything I have tried it in rifle or pistol.
    I have shot if from super mild to super wild and it out performs most other bullet designs I have tried.
    Quote Originally Posted by rancher1913 View Post
    4 cav hp brass, rancher1913 at yahoo dot com, 80701

  8. #8
    Boolit Master hicard's Avatar
    Join Date
    Jan 2007
    Location
    Northern Kalifornia
    Posts
    1,406
    I am #3 on the list and went to check my mold inventory and found out that I already have this mold so I am going to have to ask to be removed from the list. Sorry for the error. hicard21atoutlookdotcom
    This country has gone to hell but now there is hope for us.

  9. #9
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    No Problem Sir, Ive updated the list.

    Quote Originally Posted by hicard View Post
    I am #3 on the list and went to check my mold inventory and found out that I already have this mold so I am going to have to ask to be removed from the list. Sorry for the error. hicard21atoutlookdotcom

  10. #10
    Boolit Buddy
    Join Date
    Jul 2009
    Location
    Tulsa, OK
    Posts
    242
    4 cav brass all pins
    Mywhittyoneatyahoodotcom

  11. #11
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Thanks Sir, I've got you added.

    Quote Originally Posted by sfcairborne View Post
    4 cav brass all pins
    Mywhittyoneatyahoodotcom

  12. #12
    Boolit Buddy
    Join Date
    Jul 2009
    Location
    Tulsa, OK
    Posts
    242
    Put me down for another:
    6 cav brass solid
    mywhittyoneatyahoodotcom

  13. #13
    Boolit Master super6's Avatar
    Join Date
    Jun 2013
    Location
    S.C
    Posts
    558
    4 cav brass all pins
    Super6 @hotmaildotcom
    29710
    Give me something to believe in. Poison
    Arosmith What it takes
    A 12 step program

  14. #14
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by sfcairborne View Post
    Put me down for another:
    6 cav brass solid
    mywhittyoneatyahoodotcom
    Ive added you on, thanks!

  15. #15
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by super6 View Post
    4 cav brass all pins
    Super6 @hotmaildotcom
    29710
    I've got you on super6, thank you!

  16. #16
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Sunday bump

    Sent from my SM-G920V using Tapatalk

  17. #17
    Boolit Bub
    Join Date
    Apr 2015
    Posts
    57
    Can you put me out of the list? Sorry, and thanks!

  18. #18
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by Kawacharles View Post
    Can you put me out of the list? Sorry, and thanks!
    No problem, ive removed you from this one.

    Sent from my SM-G920V using Tapatalk

  19. #19
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Sunday Bump for a phenomenal 357 load!

  20. #20
    Boolit Bub
    Join Date
    Nov 2007
    Posts
    67
    I'm in for a 4 cavity brass HP version, plain based please........email Jeffery.Thorpe@verizon dot net Thanks

Page 1 of 16 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check