Fellow Boolit Casters,
THIS BUY IS NOW CLOSED...PLEASE REVIEW YOUR ORDERS FOR ACCURACY AND KEEP AN EYE OUT FOR YOUR INVOICE
This will be one of the last Group Buys for FY19. It has been a pleasure serving you but I need some time to cast myself. But I am going out with a bang. This one I liked so much I didnt want to wait the long duration for getting a mold cut with MP Molds...but this is THE ONE!!!
Mr. Glenn Larsen has come out of design retirement AGAIN to offer the Larsen C432-250 RF. It is spec'ed out for around 250 grains maybe a little over. Pin options is where this will be a must have. Will come with [B]Large, Deep Penta (Same Depth as the Large pin in the Hammer Series) and flat. Penta pins will be rounded to prevent breakage if expansion reaches the base of the HP. The large and deep Penta should get the weight down around 240 when loaded giving good weight for caliber and enough fulle diameter to seal the bore nicely, enter the bore straight and give maximum case fill with slow burning powder. Recipe and properties to replace quite a few molds.
This is a new boolit design (scaled up from the C358-180 applying all of the same priciples that made the original boolit very accurate). This will be suitable for any 44 Special/Magnum (or longer versions) along with the 444 Marlin firearms. It will cast at about 0.432" or 0.434" (your choice) dependent on your alloy. The weight is as shown on the drawing dependent on your alloy of choice. Meplat to crimp will fit long Ruger Cylinders but has as much full diameter beyond the crimp groove as the HG 503.
WE NEED 12 TO COMMIT BEFORE IT MOVES TO ACTIVE AND A FULL 25 HP SIGN UPS BEFORE IT CLOSES!!!
Options and details . .
1. Mold will be available in 2 Cavity brass HP, 4 Cavity Brass HP, 4 Cavity Brass Solid or 6 Cavity Aluminum Solid only.
2. Available in .432 and .434 diameters (WW).
3. Comes with Large Pin, Shallow Penta, Deep Penta and Flat
4. Available in Gas Check or Plain base
5. Available in the Wonderful 6 Cavity Aluminum also.
Disguised Email- HP or Solid- Diameter-# of Cavities-PB or GC- Zip Code if you want to be able to track your package
Example:
j_bownes at yahoo dot com -SOLID .432- 6 Cavity PB-Aluminum- 12121
or
j_bownes at yahoo dot com – HP -.434- 4 Cavity GC-All Pins- 12121
Cost is as follows:
Solid Molds -
- 4 Cavity solid Brass 95 Euro's (80,75 with discount)
- 6 Cavity solid Aluminum 95 Euro's (80,75 with discount)
Hp Molds -
- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)
These prices will be converted to us dollars when you get the paypal invoice.
GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME
Add a set of Handles for 20 additional Euros. A savings of 3 off standard pricing.
Please include your (disguised) email address with your request.
Miha will send out invoices about the time the buy gets closed. Payment's through PayPal (he's in Slovenia). Shipping's direct.
Sign Up List:
Solid:
1)j underscore bownes at yahoo dot com- SOLID – 0.432 – 4 cavity PB - Brass
2)kawacharles1973 at g mail dot com- SOLID – 0.432 – 6 cavity PB - Aluminum
3)AnthonyB (no space) 45 at Verizon dot net - SOLID – 0.432 – 4 cavity PB - Brass
4)greg ((att)) watch mans tower ((dott)) com – SOLID -.432 - 6 Cavity PB- NO LUBE GROOVES - 65552
5)denneyr at sbcglobal dot net - SOLID – 0.432 – 4 cavity PB - Brass- 73099
6)
7)
8)
9)
10)
Hollow Point:
1)j underscore bownes at yahoo dot com – 0.434 – 4 cavity HP GC- ALL Pins)(Honcho)
2)idahobronco at aol Dot com– 0.434 – 4 cavity HP PB-(ALL Pins)(Honcho)(Designer)
3)AnthonyB (no space) 45 at Verizon dot net – 0.432 – 2 cavity HP PB-(ALL Pins)
4)rocpyro at gmail- – 0.432 – 4 cavity HP PB-(ALL Pins) PLUS Handles
5)mrsparkman at mrsparkman dot com – HP -.432- 4 Cavity GC-All Pins- 22191
6)eagle-rain at cox dot net -HP – 0.432 – 4 cavity HP GC-(ALL Pins) 06096
7)MT pete 79 at hot mail dot com- – HP -.432- 2 Cavity GC-All Pins
8)bluewrench75 at gmail dot com -HP- .434- 4-cavity HP- GC-(All Pins)- 26034-DHL
9)greg ((att)) watch mans tower ((dott)) com – HP -.432 - 4 Cavity PB- NO LUBE GROOVES -All Pins- 65552
10)no34570 at gmail dot com– HP -.434- 2 Cavity GC-All Pins
11)429421 at gmail dot com– HP -.432- 4 Cavity PB-All Pins
12)boomsticksfirearms at lowcountry dot com - 0.432” 4 cavity HP GC all pins 29488
13)jbpaul at suddenlink dot net – HP -.432- 4 Cavity PB - All Pins - NO LUBE GROOVES - 71111
14)jbpaul at suddenlink dot net – HP -.432- 4 Cavity GC - All Pins - NO LUBE GROOVES - 71111
15)greggoryashley at yahoo dot com-HP- .434-2 cavity GC - All Pins -
16)pyoung 914 at yahoo dot com - HP - .434 - 4 Cavity GC - All Pins - 31069
17)linc4570 at gmail dot com 432 Brass HP -PB - 2 cavity all pins. V0C2W0
18)Worgen(dot)wiki(at)gmail(dot)com- HP-.432 - 4 Cavity PB - All Pins
19)namovlov AT bigpond DOT com- HP-.432 - 4 Cavity PB - All Pins
20)siberianfiveohfiveatgmaildotcom- – 0.434 – 4 cavity HP PB-(ALL Pins)
22)bvanfleet1 at roadrunner dot com - HP-.432 - 4 Cavity PB - All Pins- NO LUBE GROOVES+ SET OF HANDLES
23)Tryandstopthisox at gmail dot com- HP– 0.432 – 4 cavity HP GC-(ALL Pins)
24)slvfx50 at aol dot com--HP- .434-2 cavity GC - All Pins + HANDLES
25)siberianfiveohfiveatgmaildotcom- – 0.434 – 4 cavity HP PB-(ALL Pins)
*****Cutting Molds
26)jstahlconstruction AT yahoo DoT com-HP- .434-2 cavity GC - All Pins
27)rodharrisonok at yahoo dot com- HP– 0.432 – 4 cavity HP GC-(ALL Pins)
28)mhaley7030 at aol dot com-HP-.434 2 cavity HP GC all pins
29)Alamodefense at gmail dot com-HP- 0.432 – 4 cavity HP PB-(ALL Pins) 78250
30)vfluckey at midco dot net-HP- 0.432 – 4 cavity HP PB-(ALL Pins)
31)eddy martinez 13 at gmail dot com-HP -.432- 4 Cavity GC - All Pins -+HANDLES- 33027
32)denneyr at sbcglobal dot net -HP- 0.432 – 4 cavity HP GC-(ALL Pins) 73099
33)tibor at tibor dot org - HP - .434 - 4 Cavity PB - All Pins - plus handles - 99507
34)robert dot davisson at comcast dot net -HP- 0.434 - 4 cavity PB -(ALL Pins)
35)Rick b 270 at aol dot com- -HP- 0.432 – 2 cavity HP GC-(ALL Pins)
36)
37)
38)
39)
40)
|
   
   
|
|
Reply With Quote
Originally Posted by PWS
