Titan ReloadingWidenersLee PrecisionReloading Everything
RepackboxLoad DataRotoMetals2Inline Fabrication
MidSouth Shooters Supply
Page 1 of 2 12 LastLast
Results 1 to 20 of 31

Thread: MP MOLDS Larsen C432-300 RF for 44 Magnum and 444 Marlin

  1. #1
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752

    MP MOLDS Larsen C432-300 RF for 44 Magnum and 444 Marlin

    Fellow Boolit Casters,

    Mr. Glenn Larsen has come out of design retirement to offer the Larsen C432-300 RF. It is spec'ed out for around 300 grains maybe a little over. Pin options is where this will be a must have. Will come with Large, Shallow Penta (Same depth as the small pin in the Hammer series) and Deep Penta (Same Depth as the Large pin in the Hammer Series) and flat. Both Penta pins will be rounded to prevent breakage if expansion reaches the base of the HP. The large and deep Penta should get the weight down around 285-290 giving good weight for caliber but lots of bearing surface.

    Click image for larger version. 

Name:	Larsen c432-300rf-05.jpg 
Views:	142 
Size:	17.1 KB 
ID:	235250

    This is a new boolit design (scaled up from the C358-180 applying all of the same priciples that made the original boolit very accurate). This will be suitable for any 44 Special/Magnum (or longer versions) along with the 444 Marlin firearms. It will cast at about 0.432" or 0.434" (your choice) dependent on your alloy. The weight is as shown on the drawing dependent on your alloy of choice. Meplat to crimp will fit long Ruger Cylinders but has as much full diameter beyond the crimp groove as the HG 503.

    WE NEED 12 TO COMMIT BEFORE IT MOVES TO ACTIVE AND A FULL 25 HP SIGN UPS BEFORE IT CLOSES!!!


    Options and details . .
    1. Mold will be available in 2 Cavity brass HP, 4 Cavity Brass HP, 4 Cavity Brass Solid or 6 Cavity Aluminum Solid only.
    2. Available in .432 and .434 diameters (WW).
    3. Comes with Large Pin, Shallow Penta, Deep Penta and Flat
    4. Available in Gas Check or Plain base
    5. Available in the Wonderful 6 Cavity Aluminum also.

    Disguised Email- HP or Solid- Diameter-# of Cavities-PB or GC- Zip Code if you want to be able to track your package

    Example:

    j_bownes at yahoo dot com -SOLID .432- 6 Cavity PB-Aluminum- 12121
    or
    j_bownes at yahoo dot com – HP -.434- 4 Cavity GC-All Pins- 12121

    Cost is as follows:

    Solid Molds -
    - 4 Cavity solid Brass 95 Euro's (80,75 with discount)
    - 6 Cavity solid Aluminum 95 Euro's (80,75 with discount)

    Hp Molds -
    - 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
    - 4 Cavity HP all pins included 135 Euro's (114,75 with discount)


    These prices will be converted to us dollars when you get the paypal invoice.

    GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

    Add a set of Handles for 20 additional Euros. A savings of 3 off standard pricing.

    Please include your (disguised) email address with your request.
    Miha will send out invoices about the time the buy gets closed. Payment's through PayPal (he's in Slovenia). Shipping's direct.

    Sign Up List:

    Solid:
    1)j underscore bownes at yahoo dot com- SOLID – 0.434 – 6 cavity PB - Aluminum
    2)greg ((att)) watch mans tower ((dott)) com -SOLID- .432- 6 Cavity PB- NO LUBE GROOVES- HI TEK -Aluminum- 65552
    3)
    4)
    5)
    6)
    7)
    8)
    9)
    10)

    Hollow Point:
    1)j underscore bownes at yahoo dot com – 0.434 – 4 cavity HP PB-(ALL Pins)(Honcho)
    2)idahobronco at aol Dot com– 0.434 – 4 cavity HP PB-(ALL Pins)(Honcho)
    3)Tja6435 gmail– 0.434 – 4 cavity HP PB-(ALL Pins)
    4)greg ((att)) watch mans tower ((dott)) com - HP -.432 - 4 Cavity PB- NO LUBE GROOVES- HI TEK - All Pins- 65552
    5)no34570 at gmail dot com-– 0.434 – 2 cavity HP GC-(ALL Pins)
    6) ronbethwyatt at gmail dot com -.434 -2 cavity HP PB all pins-72007
    7)namovlov at bigpond dot com– 0.432 – 4 cavity HP GC-(ALL Pins)
    8)shutupandjump at yahoo dot com- 4-cav HP GC .434 mold, all pins
    9)krflff2 at dejazzd dot com-0.432 – 2 cavity HP GC-(ALL Pins) 17578
    10)
    11)
    12)
    13)
    14)
    15)
    16)
    17)
    18)
    19)
    20)
    22)
    23)
    24)
    25)
    *****Cutting Molds
    26)
    27)
    28)
    Last edited by bluejay75; 09-10-2019 at 02:14 PM.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  2. #2
    Boolit Master
    tja6435's Avatar
    Join Date
    Apr 2014
    Location
    Westcliffe, CO 81252
    Posts
    898
    .434 4 cavity hp/pb

    Tja6435 gmail
    Thanks
    8500' Wet Mountain Valley, Colorado

  3. #3
    Boolit Buddy Dr-Greg's Avatar
    Join Date
    Jul 2016
    Location
    Missouri
    Posts
    102
    Can I get both of these in a Hitek version?

    greg ((att)) watch mans tower ((dott)) com -SOLID .432- 6 Cavity PB-Aluminum- 65552

    and...

    greg ((att)) watch mans tower ((dott)) com - HP -.432 - 4 Cavity PB - All Pins- 65552

  4. #4
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752
    All fixed up Gents.....

    Additionally...Mr. Larsen added a 1 degree radius to the front edges to assist in cycling through Lever Actions and feeding from 77/44 Magazines.

    FINAL Version.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  5. #5
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Hi
    I'll take a 2 Cavity .434 HP GC mold all pins included please
    no34570 at gmail dot com
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  6. #6
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Hey bluejay75
    Doing great work mate,thank you
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  7. #7
    Boolit Buddy Dr-Greg's Avatar
    Join Date
    Jul 2016
    Location
    Missouri
    Posts
    102
    Since the 250gr version of this seems to be doing so well, I wanted to juice this one a bit and bring it back up to the top. Don't want it to get lost

  8. #8
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752
    I feel this one is going to make it. Might take a while...but its going to make it.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  9. #9
    Boolit Buddy Dr-Greg's Avatar
    Join Date
    Jul 2016
    Location
    Missouri
    Posts
    102
    *bump*

  10. #10
    Boolit Man White Oak's Avatar
    Join Date
    Jul 2016
    Location
    Arkansas
    Posts
    80
    ronbethwyatt at gmail dot com -.434 -2 cavity HP PB all pins-72007

  11. #11
    Boolit Buddy
    Join Date
    Jul 2007
    Location
    Tasmania Australia
    Posts
    396
    G'Day
    Could I have a .432 4 cav gchp please. namovlov at bigpond dot com
    Thanks Juddy

  12. #12
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752
    All fixed up Gents
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  13. #13
    Boolit Master
    no34570's Avatar
    Join Date
    Apr 2005
    Location
    East Gippsland,Australia.
    Posts
    1,347
    Bump ??
    Cheers

    no34570

    "I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.

  14. #14
    Boolit Buddy Dr-Greg's Avatar
    Join Date
    Jul 2016
    Location
    Missouri
    Posts
    102
    *bump* - really wanting this one to go through

  15. #15
    Boolit Grand Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,499
    4-cav HP GC .434 mold, all pins.

    shutupandjump at yahoo dot com

    Thanks!!!
    KE4GWE - - - - - - Colt 1860, it just feels right.

  16. #16
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752
    Couple more HP molds and this one goes active!!! I would like this one to make it as well. The long nose/ crimp groove location will allow this to be tailored to a wide range of applications.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  17. #17
    Boolit Master dkf's Avatar
    Join Date
    Mar 2013
    Location
    Pa
    Posts
    1,555
    I've got way too many .44 molds but.... You can add me to the list for a- krflff2 at dejazzd dot com .432" 2 cavity HP Gas Check with All Pins 17578

  18. #18
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,752
    Quote Originally Posted by dkf View Post
    I've got way too many .44 molds but.... You can add me to the list for a- krflff2 at dejazzd dot com .432" 2 cavity HP Gas Check with All Pins 17578
    Done sir.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  19. #19
    Boolit Man White Oak's Avatar
    Join Date
    Jul 2016
    Location
    Arkansas
    Posts
    80
    I would like to change mine to GC (if this ever goes active)
    Number 6.

  20. #20
    Boolit Buddy Dr-Greg's Avatar
    Join Date
    Jul 2016
    Location
    Missouri
    Posts
    102
    Bump

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check