Inline FabricationTitan ReloadingWidenersReloading Everything
Lee PrecisionRepackboxRotoMetals2Load Data
MidSouth Shooters Supply
Results 1 to 9 of 9

Thread: Eating Some Crow

  1. #1
    Boolit Buddy
    Join Date
    May 2016
    Location
    Mesa, AZ
    Posts
    134

    Eating Some Crow

    I started another thread here about my adventures with chronographing 45 Colt Black M-Z rounds and ended up saying I was going to give up and spend the money to acquire some real black powder.

    Well I did that, buying a couple cans of Old Eynsford FFFg. My first trip to the range was "eventful". My arthritic hands don't enjoy full BP 45 Colt loads like they used to so my ammo was 31g of FFFg behind a 256g RNFP lubed with SPG. First 5 rounds went OK but before I finished the second cylinder it started dragging. By the 10th round I had to index the last round by hand as the fouling was so thick between the barrel and cylinder.

    Now I should probably explain this was shooting my latest acquisition, a late production USFA 45 Colt, one of their "Pre-War Models" complete with the black powder frame. This gun is so well fitted, with a minimal barrel cylinder gap it just didn't tolerate the BPs fouling build up. I was pretty disappointed thinking I would have to relegate it to smokeless powder reloads, but...

    A week later, while loading up for my next trip to the range, I noticed 20 of the Black M-Z rounds I had intended to chronograph but were now just setting on the shelf since I thought I was giving up on Black M-Z. I decided to take them along and see how the USFA like them as one of Black M-Z's claims to fame is reduced and easy to manage fouling.

    After shooting about 60 rounds of smokeless loads I got to the Black M-Z rounds. The first five went off with satisfying clouds of smoke and that odd smell it has. The cylinder was turning freely so I fired another five (I only load five rounds, starting with the hammer down on an empty chamber). The cylinder still turned easily and continued to do so for 4 cylinders (20 rounds total).

    Looks like I will be shooting fake black powder in my fake "Colt SAA". And having said I was giving up on Black M-Z, I have to say crow doesn't test so bad with a little salt & pepper, and a lot of salsa! (LOL)

    Dave
    Last edited by Dave T; 09-17-2018 at 12:33 PM.

  2. #2
    Moderator


    Join Date
    Apr 2014
    Location
    Way up in the Cascades
    Posts
    8,075
    Interesting, to be sure. Have you ever tried Pyrodex Ctg. ?

  3. #3
    Boolit Buddy
    Knarley's Avatar
    Join Date
    Jan 2008
    Location
    Central Minnesota
    Posts
    351
    Pyrodex is the LAST powder I'd ever use!
    A gun in hand is worth two cops on the phone.
    MOLON LABE

  4. #4
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    2,170
    Sounds a great deal like a fouling management problem to me or too light a charge not building enough pressure to consume the powder completely enough. Real BP fouling will eventually build up enough to almost lock up the cylinder but it shouldn't foul out that quick and especially in a cartridge revolver.
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  5. #5
    Boolit Mold
    Join Date
    Sep 2018
    Posts
    7
    31 grs FFFg and 265 grs boolit, lubed with SPG, does not sound like too light a load or a lubing problem.

    Locking up after 10 rounds however is extraordinary. Especially with OE, that tends to have somewhat less fouling and take to softening better than subs. Then, any fouling lock up should take at least 30 rounds, and should be due to fouling of the arbor. If the fouling is at the cylinder gap, and locking the cylinder up, there's something going on there such as misalignment. It's definitely just powder residue and not any lead? The only other thing that comes to mind is insufficient crimp? The primer is unseating the bullet and pushing powder out the case mouth before ignition gets well underway?

    In any event, seemingly not a problem as you are getting decent ignition with M-Z and are happy with it. I prefer OE to all other options, but to each his own.

  6. #6
    Boolit Buddy
    Join Date
    May 2016
    Location
    Mesa, AZ
    Posts
    134
    Years ago I tried Pyrodex and soon learned it is more corrosive than black powder could be. No thank you!

    My 31g load of FFFg is compressed at least 1/4" and the crimp is solid. The Black M-Z load filled the case to about the same level so it got the same compression and crimp.

    Holding this USFA revolver up to a bright light when it's clean I can only see a minimal barrel cylinder gap (don't have feeler gages). Turning the cylinder the gap looks uniform to my 70 year old eyes so no misalignment of the cylinder. My other USFA single actions are similarly close fitted but this one is the tightest of them all.

    Given my druthers I would preferred to shoot real black powder, based on years of experience loading it in cartridge guns and chronographing the results. Black powder can be amazingly consistent, delivering single digit extreme spreads in some cases. The wide velocity spreads of the Black M-Z loads I tried turned me off to the propellent. Now having a functional gun when shooting Black M-Z has changed that thinking, hence the after taste of crow pie. (smile)

    Dave

  7. #7
    Boolit Buddy
    Knarley's Avatar
    Join Date
    Jan 2008
    Location
    Central Minnesota
    Posts
    351
    Try wiping the face of the cylinder off when you reload. Use bore butter on the cylinder pin too. Really helped my cap guns when shooting matches for cowboy shooting.
    A gun in hand is worth two cops on the phone.
    MOLON LABE

  8. #8
    Boolit Buddy
    Join Date
    May 2016
    Location
    Mesa, AZ
    Posts
    134
    Knarley,

    When I tested my FFFg loads I had to squirt Ballistol on the B/C gap while holding a rag under the gun. The drippings on the rage were used to wipe off the cylinder face. That's the only way I got through those black powder loads. Yea it can be done but it's kind of a pain.

    The ease of shooting with Black M-Z (all 20 rounds without a hitch or need to clean anything) made me a convert to that powder. It doesn't hurt that it's way cheeper and I can drive to Sportsman's Warehouse in 5 minutes and get a pound anytime.

    Ya know, I may be getting a taste for crow. (LOL)

    Dave

  9. #9
    Boolit Buddy
    therealhitman's Avatar
    Join Date
    Nov 2014
    Location
    USofA
    Posts
    496
    Congrats on the new toy. Your USFA is one of the few remaining items on my "buy on sight" list.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check