Reloading EverythingSnyders JerkyWidenersRepackbox
Lee PrecisionMidSouth Shooters SupplyLoad DataRotoMetals2
Titan Reloading Inline Fabrication
Results 1 to 16 of 16

Thread: Neat old pistol, M&P

  1. #1
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,833

    Neat old pistol, M&P

    ............Was out with a couple buddies today and went by a gunshop and there in the Peestol case, 2nd shelf down was a VERY nice looking old S&W M&P in 38 Special with a 6" bbl. There was some bluing wear around the muzzle and some on the leading edge of the cylinder. I'd guess (I didn't ask to handle it) it was probably a least 90% blue. Had the old skinny grips.

    The price was marked $385 so I didn't dare ask to see it as just looking at it lying there was tough enough to deal with. If I would have had it in my hand, and the action and barrel would have been in good shape I don't know what I would have done

    .................Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  2. #2
    Boolit Grand Master
    454PB's Avatar
    Join Date
    Mar 2005
    Location
    Helena, Mt.
    Posts
    5,389
    I thought you didn't like pistols?
    You cannot discover new oceans unless you have the courage to lose sight of the shore

  3. #3
    Boolit Buddy
    Join Date
    Mar 2008
    Location
    Colorado
    Posts
    203
    Hi Rick:

    One of these days, I'm going to have to show you an old S & W M&P that was originally factory marked at 38 S&W. At some point it was changed to 38 Special. It has the lanyard ring on the butt, and is parkerized.

    I don't really know for sure, as it was my Grandfathers, but I believe it to be a WW1 original.

    The trigger is ungodly stiff, with more creep than any gun I've ever shot. The timing leaves much to be desired, but when you pull the trigger, you know it's going to fire every time.

    Richard
    Cat, the other white meat!!

  4. #4
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,375
    First deer I shot with a handgun was with a 6" M&P........Back when I was a young and dumb kid (12), and didn't know it couldn't be done, bright and early one morning I snuck the S&W M&P with 6" barrel out to pot at some squirrels. My Uncle had loaned it to my Mom when we moved out on the ranch for "protection". I'd managed to pot a couple deer with my .22LR and a couple with the M94 my Uncle had loaned us also so I had a little "big game" hunting under my belt. Anyways my Uncle had showed me how to shoot the revolver and had slipped me some extra ammo "for practice". It was a .38 Special of course and the ammo was Peters 158 gr lead RNs.

    My Mom didn't like me shooting the revolver without her or my step dad around but she was asleep, my step dad had already left for work and I would be out to check on the cattle, shoot a little and have the revolver cleaned and put back all before she woke up. That was the plan anyway. I rode my horse out to the back forty where there was about 20 acres of cherries. I spotted several deer meandering through the small orchard and figured I knew which trail into the woods they'd take. I slipped off my horse, tied her to a tree and slipped off along another trail through the woods to set up an ambush. I got to my spot about 5 minutes before the deer came along. There was two does in the lead with their four fawns following and big old dry doe bringing up the rear. I was nestled down into some scotch broom and was pretty well oblivious to the deer. I had the M&P cocked and held in both hands as I was sittng. I let the first two does and their fawns walk by. Then as that big doe came abreast I raised the revolver, lined up the front sight in the rear notch aiming just behind the close front leg as the doe stepped foreward. I pulled the trigger and the doe flinched, walked about fifteen or twenty steps and fell over dead. The others milled around until I stood up then they took off.

    I was one pretty excited kid. I gutted the doe (I always cared a Barlow pocket knife back then-didn't every kid?) and took her back and hung her in our garage/shed and skinned her. I then cleaned the revolver and put it back. No one asked what I killed it with, guess everyone thought I'd used my .22LR. Anyways I almost got away with it until a couple days later when we were cutting and wrapping the deer for the freezer. My step dad found the .38 slug stuck in the offside shoulder bone. He just stuck it in his pocket and later when we were down at the barn he pulled out a bottle of whiskey (he always had one down there) gave it to me in one hand and the bullet in the other hand and said; "good shot, take a snort." Of course all that was when the deer were weak and hadn't been issued body armor by the PETA folks. I also didn't yet know you couldn't kill anything with a .38 Special 158 gr RN let alone a deer.

    Larry Gibson

  5. #5
    Boolit Master At Heavens Range 2008 Swagerman's Avatar
    Join Date
    Apr 2005
    Posts
    898
    Rick, did it look anything like this one, which is a five screw.

    Jim


  6. #6
    Boolit Master Glen's Avatar
    Join Date
    May 2006
    Location
    The great Pacific Northwest
    Posts
    995
    Yeah, I like those old M&Ps myself. I guess that's why I've got a 5" .32-20 M&P for my avitar!
    Glen

  7. #7
    Boolit Buddy
    Join Date
    Mar 2008
    Location
    Colorado
    Posts
    203
    Swagerman:

    Your photo looks exactly like mine, except mine is parkerized. Does yours have any marking on the bbl showing it was originaly a .38 S&W?

    I"ll have to post a photo later today showing the different cal marks. Both look to be factory stamped.

    It also appears I've made a mistake in the age of these guns. Turns out they are WWll models, although I don't have a clue as to why the stampings show show first .38 S&W, (crossed out), then .38 Special. Any ideas?

    Richard
    Cat, the other white meat!!

  8. #8
    Boolit Buddy
    Join Date
    Mar 2008
    Location
    Colorado
    Posts
    203
    Who would have thought this old pistol would have auctioned off for $938.00??

    http://209.85.173.104/search?q=cache...1&<br /> gl=us
    Last edited by waksupi; 09-17-2008 at 09:01 PM.
    Cat, the other white meat!!

  9. #9
    Boolit Master
    Join Date
    Aug 2006
    Location
    NE Ohio
    Posts
    3,130
    Quote Originally Posted by Meatco1 View Post
    Swagerman:

    Turns out they are WWll models, although I don't have a clue as to why the stampings show show first .38 S&W, (crossed out), then .38 Special. Any ideas?

    Richard
    The victory model was originally chambered for the 38 S&W aka 38/200. A stubby 38 caliber cartridge that found favor in Great Britain by using a heavy for caliber bullet at moderate speed. Some of them were reworked after the war to accept the 38 Special cartridge because the 38 S&W was hard to find and not considered powerful enough.

    Check out the dimensions of the two cartridges and see what you think.

    I don't believe it was a well thought out conversion.

    Good luck.
    Knowledge I take to my grave is wasted.

    I prefer to use cartridges born before I was.

    Success doesn't make me happy, being happy is what allows me to be successful.

  10. #10
    Boolit Master


    Nueces's Avatar
    Join Date
    Dec 2006
    Location
    Texas Hill Country
    Posts
    2,239
    Wow. I had an M&P Navy just like that one, carried it around a Texas gunshow in the early seventies and couldn't get $35 for it. Finally traded it to a gunshop. Rats.

    Mark

  11. #11
    Boolit Master At Heavens Range 2008 Swagerman's Avatar
    Join Date
    Apr 2005
    Posts
    898
    Meatco1, where the barrel screws into the frame, on the left side it has BNP with a little crown above it.

    On the right side of it above in front of the trigger the frame says: MADE IN USA
    so I guess it was contract revolver for Britain or Canada. As to being a .38 sw, kind of doubt that. It says clearly stamped .38 special and no crossed out .38 sw.

    Also has cylinder throats for .38 special.

    Jim

    ================================================== =======================

    OK, I checked the barrel again, my memory isn't what it use to be....it is indeed once a .38 sw caliber that evidently has been converted very nicely to .38 special. Dang! When your wrong...ya gotta own up to it.

    Jim
    Last edited by Swagerman; 09-17-2008 at 10:59 PM.

  12. #12
    Boolit Buddy
    Join Date
    Feb 2008
    Location
    Here and Now, Then and There
    Posts
    425
    You probably have a Victory Model S&W.

    I have one marked US Property in 38 Spl.

    Would like to get one of the British contract ones in 38 S&W, it'd go good with my Webley Mk4's.

  13. #13
    Boolit Master At Heavens Range 2008 Swagerman's Avatar
    Join Date
    Apr 2005
    Posts
    898
    dominicfortune00, your MK4 Webley would go good with my .38, but I doubt you'll sell.

    However, my .38 special is available if its of any interest to you. I'm in the process of thinning my catch of revolvers, getting too old to shoot them all.

    Jim

  14. #14
    Boolit Master
    lathesmith's Avatar
    Join Date
    Nov 2006
    Location
    Springfield, Missouri
    Posts
    1,373
    Well, since you guys DID bring the subject up...I have to trot out a few pics of my S&W Victory Model (again). I love these old guns, they just reek of history and nostalgia. This one had a pair of checkered grips on it when I got it; I replaced them with a correct pair of smooth grips. On these old guns even the grips were stamped with the serial #. I thought the checkered grips were just stuck on much later, but after doing a bit of research I discovered they are period-correct and may possibly be armory-replacement/upgrades, probably when this gun finally ended up in Australia in the 1950's. I wish this thing could talk, what stories it could tell!
    I think Buckshot has one that is just about its twin; these were originally lend-lease guns, I believe. Ah, those were the days....
    lathesmith
    Attached Thumbnails Attached Thumbnails 38 S&W (Small).jpg   dscf0069 (Small).jpg   dscf0072 (Small).jpg   dscf0067 (Small).jpg  

  15. #15
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,833
    Quote Originally Posted by Swagerman View Post
    Rick, did it look anything like this one, which is a five screw.

    Jim

    ..............Yes, except it didn't have a lanyard ring. The card by the pistol just said, "Pre M-10 S&W M&P", and it looked to be in VG-Exc condition.

    454PB I thought you didn't like pistols?

    ..........Well, I didn't use to until I bought a K38 Heck I could Hit Stuff with it with my eyes closed almost! Makes a whole bunch of difference.



    Got a Couple Victory models

    ...................Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  16. #16
    Boolit Grand Master
    Join Date
    Dec 2006
    Location
    Floyd, VA
    Posts
    5,574
    Larry,
    Cool story about you an' the ol' man havin' a celebratory shot together. I like it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check