Please put me down for a 6 cavity Lube Groove Aluminum, (Gas Check) (.455) zeljohnatcenturylinkdotnet
Please put me down for a 6 cavity Lube Groove Aluminum, (Gas Check) (.455) zeljohnatcenturylinkdotnet
jklm98315 at yahoo dot com please put me down for
4 cavity brass HP, GC, .453", all pins, reg lube groove.
rrh
Lakehouse2012 I sent you a PM about this mould ordering. Question on Euro to US dollars for mould cost.
Put me down for one brass 4 cavity regular lube grove HP GC .455" all pins
and MP handles please
mdsleatherworks4u@gmail.com zip code 63640
Last edited by Cowhide; 07-11-2021 at 06:40 PM.
kshafer1@gmail.com
Please put me down for
4 cavity brass HP, GC, .453", all pins, MP handles, smooth
Thank you
Hi Armorguy,
I've put you in but there is one issue with your request: If you want the GC, you can't have it smooth side. When Miha machines these, he has to do the smooth side as a secondary operation, so he goes in and bores out the grooves which also wipes out the GC. Let me know if the GC or the grooveless is more important to you.
Thanks,
.453” 6 cav aluminum solid gas-checked, if I’m not too late.
drctml AT yahoo DOT com
Last edited by cainttype; 07-28-2021 at 09:56 PM.
“It is better to keep your mouth closed and let people think you are a fool than to open it and remove all doubt.”.... Mark Twain
Sorry to do this, but please remove me from this group buy.
Thanks
Sir , Lakehouse would you be kind as to modify myentry on #3 for thadd3220 to show just 1 set of handles . Just curious have you heard any word from Miha as to the procurement of HP pins or machining in house with another highly trained and skilled machinist ? Thank you for any info .
Hi everyone,
I talked with Miha yesterday, he is very sorry for all the delay in mold production. There are 2 issues he is dealing with, his supplier of the HP pins and a general shortage (and high cost) of raw materials. It's no different in the USA, if you have tried to buy any steel lately, you are in for a real shock... 2-3 times the cost from "pre-covid" pricing.
The GOOD news is, he has a new lathe coming, is supposed to start it's voyage by sea on the 28th and once it arrives and gets setup, Miha will start making his own pins!! Soon this pin-issue will be behind us. Stay patient and keep posted.
-Lakehouse2012
Update for everyone from Miha:
The CNC lathe to make all the pins is now on the ocean, expecting arrival at his shop of 28JAN22. This means that sometime in Feb he'll begin making all the pins. So stay tuned HP molds will start flowing again!
Is ANYONE interested in the 2-cavity version? I'm an old fart and prefer the 2-cav mold weight for casting.
Ask Miha if he can do this... inquiring minds want to know.
ADDENDUM: if he can, I'd like a .455 plain base smooth side 2-cav HP with all pins.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |