______________________________________________
Growing old is mandatory, growing up is totally optional!
Ed,
Thanks for your prompt imput.
Just like I thought, I was stupidly overlooking the obvious. Now that I look at it, It makes sense that the generator needs access to all of the parts folders, not just the parts in the Main Body folder.
Made the change, clicked the Start button and noted the time. Now just wait.
I'll post the results again when I hear the ding.
Thanks again.
TylerR,
Thanks for responding.
4 1/2 hours and still counting.
Approximately how long should it take?
The download date was October 16, this year.
I'll download the latest file and try again.
Wow,
downloaded the latest version and - Click, Beep. Instantaneous PDF - file with all parts listed and slicer settings for each part.
Thanks guys for your help
I just finished installing my Ender 3 printer in an Ender Enclosure so that should help eliminate my warping problem with large prints that cover most of the printing bed.
Gonna set up the Main Body tonight for the 2 days, 4 hour, 1minute print.
I'm having just so much fun!!
yeah, i'm kind of going down that path until i get a casefeeder/bulletfeeder printed out. i need to figure out a little better support (i think i'm going to use allthread, and center up the 4-way mounting bolt to Tyler's main support and support it that way. other than that, a few short adapter pieces of tubing (different diameters between brass adapters and the 4-way, depending on cartridge). we shall see. if the tube to tube epoxied adapter isn't working up to snuff, i'll jump into fusion 3d and design one (been a while since i did CAD work, but i'll bumble through it).
also, for those that are using Tyler's APP press slides and caliber adapters, do you find that you have to shim the main riser to get the proper height above the slider to pass brass through? or am I missing something?
You do have to have the proper sized slider shuttle underneath.....each adapter is created with one of Lee's sliders (shuttles) in mind....there are several. Usually you want the shuttle at least a little lower than the brass case. That way the next case above doesn't drop below the shuttle height and cause a hung slider/shuttle. At the same time, you don't want it to have to drop farther than you have to, to prevent side movement or tipping.
Ya. I had it set up with Lee stuff. Just trying to get it dialed in for Tyler's adapters. It doesn't seem like I would use as tall of a pusher on the slide with Tyler's version for 223.
Sent from my Pixel 5 using Tapatalk
QUOTE=MSUICEMAN;5320824]Ya. I had it set up with Lee stuff. Just trying to get it dialed in for Tyler's adapters. It doesn't seem like I would use as tall of a pusher on the slide with Tyler's version for 223.[/QUOTE]
Nope......use the tallest one for .223 rifle and taller.
and use the adapter that's with the shaped slot for the least trouble and clean drops.
And notice the black base shuttle designed by TylerR, below Lee's tall slider. That part helps too.
Last edited by GWS; 12-21-2021 at 09:10 PM.
Nope......use the tallest one for .223 rifle and taller.
and use the adapter that's with the shaped slot for the least trouble and clean drops.
And notice the black base shuttle designed by TylerR, below Lee's tall slider. That part helps too.[/QUOTE]
Got the slider. Is the brass tube seated all the way down into the main post in your picture? I'll have to mess with mine more, but it seemed like to have it seated all the way down, I needed to go with the shorter slider. I'll take pics later.
Sent from my Pixel 5 using Tapatalk
Last edited by MSUICEMAN; 12-22-2021 at 10:05 AM.
Yeah, I guess I was delirious or something. One nut between main post and frame works, as does the correct slides. I did have to do some sanding to get the tubes to fit snuggly but not ridiculously tight. Made an adapter for the 4 tube collator, though I should brace it for additional support. All that will be moot shortly.....
Sent from my Pixel 5 using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |