Yep, that checks all my marks for a new printer: high temp for nylon, enclosure, coreXY, large, and fast. Thanks! I'm probably going to order it. Wish I got in on the intro offer but it still is way cheaper than a Prusa. I'm interested in shooting a larger nozzle to see how fast I can print.
I sell processed brass I pick up as an RO at major matches. I generally pick up ~5g bucket per match and it just helps offset shooting costs. It generally is mostly 9mm but I pick it all up (40S&W, 45ACP, 38 SC, etc...). I wet tumble, roll size, and now decap!
Cheers,
Toby
Hey everyone, I've been lurking for a couple months and just want to say how much I appreciate all the work put into this. I've completed 2 collators for the most part. Just working on plumbing them into the press.
I haven't come across any proximity sensor placement for a case feed down at by the press similar to the drop tube setup for bullets. Seems like most put it up on the main body of the collator, usually I'd go that route but I went with time delay that Kausit came up with so having it down low would give room to fill the tube with the time delay. I'm using a lee 6000 press, I may have to dip my toes into Fusion 360 to come up with a mount for the proximity sensor. Just wondering if anyone has done this yet and I just missed it.
Again this thread has been amazing to read through! Got me into the 3d printing world while making reloading even more fun.
I got in at the very beginning, they had a slight whoops and there was an extra $50 off. Paid $449 for mine. Can never go wrong at that price. I've been running sovol printers for 2 years now and you just can't beat the bang for the buck. And I haven't had any issues with them.
Toby, let me know which motor you decide to go with because I am doing the exact same thing right now. Printing a Mongo for case feeding for .45acp into my decapper and then I'd like a clean version for my roll sizer.
XDrebel's inline fab mount is in contributors folder.
https://github.com/BF556/Feeder/blob...B_QC_Mount.zip
Thank you TylerR
After getting away from the tunnel vision of concentrating on this being used with the InLine Fabrication QC plate, I realized that this could actually be used with the APP mounted directly to the bench. If someone would want to use it that way and feels they want to add some mounting holes to it for more support and needs the original Fusion 360 file, just let me know.
Sent from my SM-S918U1 using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |