Lee PrecisionTitan ReloadingInline FabricationRotoMetals2
Reloading EverythingMidSouth Shooters SupplyWidenersRepackbox
PBcastco Load Data
Page 354 of 354 FirstFirst ... 254304344345346347348349350351352353354
Results 7,061 to 7,066 of 7066

Thread: Making that Bullet Collator

  1. #7061
    Boolit Master GWS's Avatar
    Join Date
    May 2019
    Location
    New Mexico
    Posts
    1,331
    One of mine lasted two weeks.......had everything to do with dropping it on the floor and stepping on it......so don't step on it and don't drink while reloading as calgarysparky pointed out. I've seen no wear from feeding bullets ......

    I tried a 3D printed shell holder, once........not a good place for plastic......ripped a case right though it, first try, sizing .9 mm. Doh! Saw that on Thingiverse.....don't believe everything you see on Thingiverse.
    Last edited by GWS; 02-26-2024 at 02:26 PM.

  2. #7062
    Boolit Mold
    Join Date
    Aug 2022
    Location
    Salem, NH
    Posts
    28
    I solved bulged cases with roll sizing.

  3. #7063
    Boolit Bub
    Join Date
    Nov 2022
    Posts
    53
    Quote Originally Posted by JStuhlmiller View Post
    I solved bulged cases with roll sizing.
    I would but at $1200 canadian for the manual unit I may as well use my app.

  4. #7064
    Boolit Mold
    Join Date
    Aug 2022
    Location
    Salem, NH
    Posts
    28
    Quote Originally Posted by calgarysparky View Post
    Glock bulge is a thing, even with MA dies. If I forgo powder check and use a FC die I can get down to 4-5 out of 100 that need to run through the buster, otherwise it's like 15-30 every hundred. Don't feel like dropping 1k on a rollsizer so busting prior to loading should help. I'm a competition shooter so I'm very picky about my ammo, lol
    me too I rollsize! some 9mm bulges but 40 is just a giant pain

  5. #7065
    Boolit Bub
    Join Date
    Jul 2014
    Posts
    46
    Dear Team
    I am looking for Spring_Drop_Tube_11 but in the repo I can “only” find Small, Medium, Large and Extra large.
    What size should I use for 223 Rem and 9x19 ?

    Med vänliga hälsningar/Best Regards
    ///Roger
    Click image for larger version. 

Name:	Spring Drop Tube.jpg 
Views:	7 
Size:	47.2 KB 
ID:	323891Click image for larger version. 

Name:	Spring Drop List.png 
Views:	3 
Size:	13.9 KB 
ID:	323892

  6. #7066
    Boolit Bub
    Join Date
    Aug 2021
    Posts
    50
    Quote Originally Posted by rogerandre View Post
    Dear Team
    I am looking for Spring_Drop_Tube_11 but in the repo I can “only” find Small, Medium, Large and Extra large.
    What size should I use for 223 Rem and 9x19 ?

    Med vänliga hälsningar/Best Regards
    ///Roger
    Click image for larger version. 

Name:	Spring Drop Tube.jpg 
Views:	7 
Size:	47.2 KB 
ID:	323891Click image for larger version. 

Name:	Spring Drop List.png 
Views:	3 
Size:	13.9 KB 
ID:	323892
    Look Here about 20 rows up. Use the #11 spring adapters. I think that is what you are referring to. If you are going on top of a feed die you will also need the medium or large you were looking at.

Page 354 of 354 FirstFirst ... 254304344345346347348349350351352353354

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check