Inline FabricationTitan ReloadingWidenersLee Precision
RepackboxRotoMetals2Reloading EverythingLoad Data
MidSouth Shooters Supply
Page 1 of 10 12345678910 LastLast
Results 1 to 20 of 197

Thread: Mihec .359-147 no groove (Hitek) for 9mm

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221

    Mihec .359-147 no groove (Hitek) for 9mm

    Hello Miha has given me the go ahead to put this 9mm 147gr competition bullet out there. This would be identical to the MP 359-135 (same ogive).

    GB CLOSED on 23JAN18

    Miha responded to the Penta pin request, they won't fit in this smaller FP area

    This mold Rerun is going to be for - 4 Cav HP, Solid in 6 Cav Brass or 8 Cav Aluminum
    Included is 2 sets of pins, one is hollow point and another set is for solid.
    There are no Penta pins available for this mold.


    This mold cast 147 Grain Hollow Point or 155-156 grain in Solid form it is designed with a small bevel base.
    Can be cut for 147 SOLID in Flat base configurations
    Can be cut for 155 SOLID in bevel base
    Available diameter is .356 .357 .358 .359


    Weight can vary +/- 1-2 grains depending in alloy used. Available diameter is .356,.357,.358, .359

    Cost for molds is as follows

    4 Cavity HP Brass - 135 euros including shipping, all pins included, top punch and allen keys
    6 Cavity Solid Brass - 95 euros including shipping, top punch and allen keys
    8 Cavity Solid Aluminum - 95 euros including shipping, top punch and allen keys

    These prices will be converted to us dollars when you get the PayPal invoice.

    GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

    Once there are 20 orders, Miha will start cutting molds.

    Please give your disguised email address to get on the buy and specify what diameter and configuration you would like.

    Here is the official buy list.

    HP version 4 Cavity Brass

    1) emrivera1.....at....gmail..dot...com - 4 Cav HP .358
    2) Gobbles23...at....gmail......dot...com - 4 Cav HP .358
    3) just 2 purchase (attt) gmail (dottt) com - 4 Cav HP .358
    4) DSLTECH at COMCAST dot NET - 4 Cav HP .359
    5) kentuckycajun at juno dot com - 4 Cav HP .358
    6) Gitchrodd..........{[at])........g m a I l ([{com) - 4 Cav HP .358
    7) zac alldredge at gmail dot com - 4 Cav HP .358
    8) Mitch.kerns At....Outlook .,,,com - 4 Cav HP .358
    9) ericw verheul at h ot mail dot com - 4 Cav HP .358
    10) amadaus101 at outlook dot com - 2 Cav HP .357
    11) harrisonll540 a t gmail dot com - 4 Cav HP .357
    12) Chennings a t gmail dot com - 4 Cav HP .358
    13) LMFD20 at gmail dot com - 4 Cav HP .358
    14) Silverjay7 at gmail dot com - 4 Cav HP .358
    15) rockwell 5926 at gmail dot com - 4 Cav HP .358
    16)
    17)

    Solid version 6 Cav brass or 8 Cav Aluminum (Solid w/bevel base)

    1) amadaus101 at outlook dot com - 8 Cav Aluminum bevel base in .357
    2) danneh88 at hotmail dot com - 6 Cav Brass 147 grn in .357
    3) czshooter AT gmx DOT com - 8 Cav Aluminum .357
    4) harrisonll540 a t gmail dot com - 6 Cav Brass 147 grain in .357
    5) tony at nozombies dot com - 8 Cav Aluminum .357
    6) sorgatz at ameritech d0t net - 6 Cav Brass BB (155gn) in .358
    7) clifton52 at gmail dot com - 8 cavity bb .358
    8) papahashbrown at gmail dot com - 6 cavity brass mold .357
    9) Eric.johnston55 at gmail dot com - 8cav aluminum solid 147gr flat base in .357
    10) middle earth sales and service at gmail .com - 8 cavity aluminum bevel base solid .357
    11) kevin>underscore>c>one>five>two>zero>at>yahoo>dot> com - 8 cavity Aluminum bevel base solid for .358
    12) keith(dot)kohlruss(at)gmail(dot)com - 6 Cav Brass 147 grn bevel base in .357
    13) Shan Dot Murphy at G mail dot com 8 cavity plain base 147 grain - 358
    Last edited by Lakehouse2012; 01-23-2018 at 07:26 PM. Reason: enhancment

  2. #2
    Boolit Buddy
    EMR's Avatar
    Join Date
    Oct 2017
    Location
    CA
    Posts
    252
    Please put me down for a 4 Cavity HP Brass

    emrivera1.....at....gmail..dot...com

  3. #3
    Boolit Master

    jeepyj's Avatar
    Join Date
    Feb 2013
    Location
    Maine, Just north of Bangor
    Posts
    1,209
    Not being knowledgeable in the HiTek process is this also a good design for PC? If so is there a downside? Thank you in advance for help. Jeepyj
    Sometimes it takes a second box of boolits to clear my head.
    Feed back thread http://castboolits.gunloads.com/show...?261449-jeepyj

  4. #4
    Boolit Buddy MAGA's Avatar
    Join Date
    Jul 2017
    Location
    NC
    Posts
    103
    Any options for bevel base?

  5. #5
    Boolit Bub
    Join Date
    Jul 2013
    Posts
    54
    I'll take a 4 cav hp brass

    Gobbles23...at....gmail......dot...com

    Sent from my SM-G955U using Tapatalk

  6. #6
    Boolit Mold
    Join Date
    Sep 2017
    Location
    FL
    Posts
    25
    Please put me down for "4 Cavity HP Brass". Bevel base would be nice if available. Otherwise, PB ok.

    just 2 purchase (attt) gmail (dottt) com

    Thanks!

  7. #7
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Hello guys just trying to help out Lakehouse with the buy it is not being hyjacked we are working together as a team on this one

    Here is the official buy list.

    HP version 4 Cavity Brass

    1) emrivera1.....at....gmail..dot...com - 4 Cav HP .358
    2) Gobbles23...at....gmail......dot...com - 4 Cav HP .358
    3) just 2 purchase (attt) gmail (dottt) com - 4 Cav HP .358
    4) DSLTECH at COMCAST dot NET - 4 Cav HP .359
    5) kentuckycajun at juno dot com - 4 Cav HP .358
    6) Gitchrodd..........{[at])........g m a I l ([{com) - 4 Cav HP .358
    7) zac alldredge at gmail dot com - 4 Cav HP .358
    8) Mitch.kerns At....Outlook .,,,com - 4 Cav HP .358
    9) ericw verheul at h ot mail dot com - 4 Cav HP .358
    10) amadaus101 at outlook dot com - 2 Cav HP .357
    11) harrisonll540 a t gmail dot com - 4 Cav HP .357
    12) Chennings a t gmail dot com - 4 Cav HP .358
    13) LMFD20 at gmail dot com - 4 Cavity HP .358
    14) Silverjay7 at gmail dot com - 4 Cavity HP .358
    15)
    16)
    17)

    Solid version 6 Cav brass or 8 Cav Aluminum

    1) amadaus101 at outlook dot com - 8 Cav Aluminum bevel base .357
    2) danneh88 at hotmail dot com - 6 Cav Brass .357 147 grn
    3) czshooter AT gmx DOT com - 8 Cav Aluminum .357
    4) harrisonll540 a t gmail dot com - 6 Cav Brass .357 147 grain
    5) tony at nozombies dot com - 8 Cav Aluminum .357
    6) sorgatz at ameritech d0t net - 6 Cav Brass .358
    7)
    8)
    Last edited by Wasalmonslayer; 12-14-2017 at 12:31 PM.

  8. #8
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by jeepyj View Post
    Not being knowledgeable in the HiTek process is this also a good design for PC? If so is there a downside? Thank you in advance for help. Jeepyj
    Good morning Jeepyj

    This mold is perfect for powder coating!
    The two styles of coating go hand in hand the powder coating is just a little thicker.

    I personally powder coat all my hi tek designs...

  9. #9
    Boolit Man kentuckycajun's Avatar
    Join Date
    Feb 2010
    Location
    Somewhere deep in the swamp....
    Posts
    79
    I wish this was in bevel base design also. What pins are included, and what would be the weight of the different HPs?
    "If you carry a gun, people will call you paranoid. That's ridiculous. If I have a gun, what do I have to be paranoid about."

  10. #10
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by kentuckycajun View Post
    I wish this was in bevel base design also. What pins are included, and what would be the weight of the different HPs?
    It is a bevel base design in original form hp is 147 grains and solid is 155.
    The only pin offered as in the original run is the round.

    Lakemaster is working on changing the post to reflect everything about this run.

    Thanks and hang tight till he gets it modified to reflect the specifics.
    Wasalmonslayer

  11. #11
    Boolit Mold
    Join Date
    Sep 2017
    Location
    FL
    Posts
    25
    Got pretty excited there for a second. Wishful thinking as stated:
    "4 Cavity HP Brass: 135 euros including shipping, all pins included, top punch and allen keys"

    The penta's expansion prospect really excited me in a heavy 9mm. Any chance it can still be done? The limiting factor seems to be the narrow méplat in the 9 to still make it feed functional without deformation, from what I remember the gurus cite. Slightly narrower and deeper penta pin? I know I'm probably reaching, but this would be the only one in its class to show great promise (see Loads of Bacon hollow point tests on youtube -fantastic expansion with proper BHN in revolver).

  12. #12
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Sorry All- I've been traveling and just returned home safely. A big Thanks to Wasalmoslayer for bailing me out!! I have revised the original post to reflect what Miha said he would run for us. Boat-tail is there now and it's optioned as HP but not the penta like I wrongly assumed.

  13. #13
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    I will message Miha and see it I can sweet talk him into a penta pin option but at this time it is not.

    Everyone is updated let me know if I missed someone.

    Thanks!

  14. #14
    Boolit Buddy
    EMR's Avatar
    Join Date
    Oct 2017
    Location
    CA
    Posts
    252
    Since diameters are now mentioned, can I please have mine edited to reflect .358? Thanks!

  15. #15
    Boolit Bub
    Join Date
    Jul 2013
    Posts
    54
    Quote Originally Posted by EMR View Post
    Since diameters are now mentioned, can I please have mine edited to reflect .358? Thanks!
    I would also like. 358 please

    Sent from my SM-G955U using Tapatalk

  16. #16
    Boolit Mold
    Join Date
    Sep 2017
    Location
    FL
    Posts
    25
    We'll keep it easy at 358 for me as well please. Thanks Wasalmonslayer for trying for the penta.

  17. #17
    Boolit Mold
    Join Date
    Dec 2015
    Location
    Daly City, CA
    Posts
    11
    4 cav hp .359 for me

    DSLTECH at COMCAST dot NET

  18. #18
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by dsltech View Post
    4 cav hp .359 for me

    DSLTECH at COMCAST dot NET
    Got you down.

    Thanks!

  19. #19
    Boolit Man kentuckycajun's Avatar
    Join Date
    Feb 2010
    Location
    Somewhere deep in the swamp....
    Posts
    79
    Ah, what the hell - molds don't take up that much room...

    4cav brass HP .358 for me, please

    kentuckycajun at juno dot com
    "If you carry a gun, people will call you paranoid. That's ridiculous. If I have a gun, what do I have to be paranoid about."

  20. #20
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    2,139
    Quote Originally Posted by kentuckycajun View Post
    Ah, what the hell - molds don't take up that much room...

    4cav brass HP .358 for me, please

    kentuckycajun at juno dot com
    Got you on the list

    Thanks!

Page 1 of 10 12345678910 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check