I am open to options.
If anyone out there makes a nice Oak or Maple 50 rounder and wants to sell me 3 or more just post it here.
TIA,
Duke
I am open to options.
If anyone out there makes a nice Oak or Maple 50 rounder and wants to sell me 3 or more just post it here.
TIA,
Duke
Last edited by Just Duke; 08-11-2008 at 08:11 PM.
Duke, I sent you the e-mail of a friend that does it for a hobby. Check your p.m's....
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Let's see pictures
Crabo
Do not argue with idiots. They will drag you down to their level and beat you with experience.
a shot gun loading block will work one side is for 410-28-20ga and other is for 12-16 ga rick
Oh well. I tried...
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Hi Guys,
Sinclair (now owned by Brownell's) has them in calibers from 22Hornet to 50-70.
Check out their website www.sinclairintl.com.
Regards
Oscar
Thank SG for the offer.
Oscar I found the page that has the loading blocks. I was just on their a couple days ago and couldn't find it for the life of me.Here is the link for the recst of you guys. Think i am going to go with 6 of the wood ones.
http://www.sinclairintl.com/cgi-bin/...ALB&type=store
Here you go. Also works on the 500 S&W.
I just bought 6 of the wood ones.
Part number is LB-8
http://www.sinclairintl.com/cgi-bin/...ALB&type=store
Years ago I made some out of oak. The best way I found is to get the thickness you want and drill all the way through then put a 1/4" bottom on it.
duke the one i have is made by Flambeau iI didnt look them up but i cant find a listing right this min i have 2 for shotgun and 4 for rifle/pistol they hold 50 each side is the 50 larger than a 7mm rem mag? the mag will fit in these rick
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |