I have a Rem 700 Classic chambered in 35 Whelen that I am beginning to load for. My RCBS-35-200-FN mold came in today and I hope to start casting a few up tomorrow. I plan on using my COWW+2%Tin stockpile for the majority of the rounds. Hunting season opens in two weeks and I'm trying to load up for a trip or two to the range before opening day (Thanksgiving). Atm the powder funds are a little low so I was wondering what powder to use out of my current stock (H322, BLC2, & IMR3031) that would be best for this round. The goal is simply to come up with a hunting load capable of 2MOA or less since my shots will be under 50 yards most likely (deep swamp hunting). I have scoured the internet and this site and have not resolved this issue so far. From what I've read I should be around 1900-2200 fps for a respectable load with a BHN of 12+ or so. My load books (1990's editions) do not list cast boolits. Looking at Lyman's 48th I see that 3031 can be used for 39.0gr (2094 fps)-50.0gr+ (2594 fps) for the #358430 (195gr) and 50.0gr (2558 fps)-58.5gr (2860 fps) for the #358315 (204gr). I would like some advise as to the alloy that I'm thinking of using, which of my current powders to choose, and a correct velocity range for hunting (small deer and hogs up to 300lbs) with said alloy if anyone has any suggestions so that I might maximize my time at the range. Also, if anyone has any BLC2 data for this boolit it would be appreciated.