I picked up a glock 21. I always shot 1911's before. Never had reloading problems for my 45acp before. I went with
the wolf barrel to shoot pc lead. I had problems with the gun locking up and sometimes primer strikes but no ignition.If I cycle again they will go off.
What I found was I had to seat the bullet way deeper than before. I had to get it just past the edge of the bullet. These bullets are sized .452. When I use the lee factory crimp it does feel some pressure as the bullet part passes thru before getting to the crimping end. You think if I size to .451 this will help? At first I thought maybe the bullet is engaging the rifling. Does the same with SWC.
(I am ordering a case gauge to eliminate out of case specs.)