Good morning,
I started casting for 45-70 and 30.30 with great result from accurate and NOE mould.
I am looking to get a 308 mould for use in 308 and 30.06 rifle.
Any suggestion welcome.
Good morning,
I started casting for 45-70 and 30.30 with great result from accurate and NOE mould.
I am looking to get a 308 mould for use in 308 and 30.06 rifle.
Any suggestion welcome.
You will get many suggestions as there are many mould designs that work well in .308 and .30-06. My favorite for the two (and .30-40 Krag) is the Lyman #314299. I'm unfamiliar with NOE products but see them mentioned frequently here.
The Lee 180gr GC works well in my 308 savage
I like my Lee 150grn. fn gc for my 30-06 and my 30-30, the flat nose does a job on deer too.
CC
I have a 175 gr. from Accurate that fits very well . It is a bore rider and has a shank that stays in the neck of the case. I tried the LEE, but having the larger nose diameter, involved pushing the boolit further into the case than I prefer.
Have you tried your 30/30 boolit in the 308 and 30/06?
Boolits cast in a Lee 309-160-R mold work well in my bolt action 30/30, 308 Win and 30/06.
the wifes 30-06 dotes on the boolit I use in the 30-30.
I haven't tried it in my 308, but it is similar to the one I use there.
only with another drive band.
The cheap and easy thing to do is try your .30-30 boolit in the other thirty cal rifles.
If that doesn't work to your satisfaction; the next cheapest option is a Lee two cavity mold, I like the 312-185. Mine from several years ago drops a bit over .312" so I can size it to fit, normally .311".
Other than that I would suggest something in the 180-200 grain range.
Robert
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |