Do we have any members that are making a push through sizing die .360. Lee size dies stop at .358
Thanks
Do we have any members that are making a push through sizing die .360. Lee size dies stop at .358
Thanks
Buckshot. Great work. Great price. Great delivery.
SwedeNelson (NOE Moulds) offers a very nice set up that uses interchangeable inserts for a large variety of sizes. The tool allows for nose-sizing inserts, too.
It's worth checking out if you might be sizing for multiple diameters in the future, and/or nose-sizing.
Make one.
Takes 5 min. 1/4 in wood dowel with slot cut in end . Put emery cloth in slot put other end in drill. Spin oiled emery cloth in lee .358 die. Check by sizing boolit every 30 seconds to minute. Stop .0005 short and go th extra fine grit. Polish to .360.
There is no difference between communism and socialism, except in the means of achieving the same ultimate end: communism proposes to enslave men by force, socialism—by vote. It is merely the difference between murder and suicide. Ayn Rand
Who makes a push through sizing die .360?
You do.
Get a LEE .358 and open it up with fine sandpaper. Slot in a nail or dowel.
I used a nail. 600 grit paper. Go slow and take measurements. Chase with 1200 grit if you have it, then FLITZ.
Mirror finish.
Shiloh
Je suis Charlie
"A society of sheep must in time beget a government of wolves."
Bertrand de Jouvenel
“Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one.” – Joseph P. Martino
“If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand.” – Milton Friedman
"Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin
Lee Precision Custom Services. Will set you back $38.00 plus shipping.
Custom Lube and Size Kit
The bullet sizing dies are intended to size molded lead bullets. Jacketed bullets can be sized, but it is necessary to use LEE Resizing Lubricant, not Liquid Alox bullet lubricant.
- Custom lube and size kits are $38.00 plus shipping.
- Maximum bullet diameter is .575.
- Current lead time for Custom Lube and Size Kits is around 6 weeks.
Custom Lube and Sizing Kit
As suggested, get a .358 and open it up .002". I uses a 1/4" steel rod tightly wrapped with emory, 400 or 600. Go slow, check your measurements.
I'm a Toolmaker so I can make about anything you need....but what the others have said, polish one up yourself. I use a brass rod .250 dia. cut a slot with a saw (hacksaw would work) emery cloth and spin it up in a drill motor. Just take your time and push a boolit thru and mic it until you get to within couple of tenth's of your desired size. Then polish with cotton cloth and fritz or whatever you have. I like the satisfaction in making things for reloading myself, part of the hobby that I like.
______________________________________________
"That guns do more than protect us from criminals; more importantly, they protect us from the ongoing threat of government."
Lyn Nofziger
Thank you. I used your method. My RCBS 35 200 mold cast bullets at .359.3. I took 600 sandpaper and 2000 grit sandpaper and my Lee sizing die now drops a perfect .359.3 When I powder coat the bullet measures .361. I then size it down to .359.3
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |