Do the Tru-line dies fir the 310 tool? Thanks.
|
   
   
|
|
Do the Tru-line dies fir the 310 tool? Thanks.
Shooter 93:
Generally speaking, yes; except that those marked "CMR" (combination muzzle resizer/decapper/expander) or "FL" (full-length sizing for pistol and short rifle cases) in the later Tru-Line Jr. sets may require more travel or force than the 310 provides. Also, you won't have the re-priming die needed for the 310. (Of course, if you use - as I generally do - a Lee or RCBS hand priming tool, that is not a problem). You will also need the correct case-head adapter bushing to screw into the 310 from the inside, or the cases may not line up properly. Going the other way, the 310 dies work fine in the Tru-Line Jrs., as that was what the presses were originally designed for.
Floodgate
Last edited by floodgate; 04-20-2008 at 10:59 PM.
NOV SHMOZ KA POP?
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote