.22 Cal. Air Rifle Pellet/Bullet NOE Group Buy?

[Hamish]

The Airweaver/Mihec .22 cal. Air rifle bullet GB seems to be a complete dud:

http://castboolits.gunloads.com/show...for-air-rifles

I would think that there would be enough interest here to get something worked up to have Al do a run of something in a banded or cupped design in a multi cavity buy.

From the original discussion:

http://forum.guns.ru/forum_light_mes...m25655931.html

Personally, I'm not real bound up with any consideration over round or flat nose, I'd just like to be able to cast my own,,,,,,,

[dromia]

If you are looking for an NOE buy then best to start an interest thread over on the NOE forum as well as here, as if it is a goer then that is where the buy will be run from.

[Hamish]

Indeed, you are right sir! Just thought I might shake the bush so to speak on this side first,,,,

[Lonegun1894]

Y'all are gonna make me buy a pelletgun, won't you?

[Hamish]

Discussion thread started at NOE:

http://noebulletmolds.com/smf/index....5ra71r3joqebi5

[GhostHawk]

Speaking for just me, that design weighs double what it ought to for standard pump up or springer use. Might be ok for PCP use but I suspect it is heavy for that also.

14.? is what all my .22 pellets weigh.

And I suspect toget a pellet that has any potential for accuracy you will need both a mold and a tool to put final shape, skirt on it. Sort of like the nomad kit.

And to put that kit together to sell for less than 100$, very very tough job there. If it would cost over 100$ for the full kit most people, me included will take the 100$ and buy pellets instead.

So you have a virtually impossible job. And now you know why this has sat for 3 years.

[jmorris]

There are several threads on the subject over at GTA .25 is the smallest I have seen though. Might talk with the fellow making them and see if he will machine smaller molds.

http://www.gatewaytoairguns.org/GTA/...7389#msg897389