My CVA Scout Pistol has a generous throat and chamber. With standard length 300 brass, I have allot of jump to the rifling. I tried to set the bullets out, but it doesn't give me enough neck to do so. I shoot 110-130 grain SP bullets.
I ran some longer cut 223 brass thru the FL resizer and trimmed the brass till it fit the chamber. Its a "tad" longer than the standard length brass, maybe 1/32"-3/64". And after seating some bullets for LOA dummy rounds, I now have the COAL I wanted.
Now before I go and load up theses rounds, I want to know if what I did is safe?
Also, what is the best way to get a case out of a LEE FL sizer? Just buy another one?
Jerry