I'd like one with thick leather. PM me.
I'd like one with thick leather. PM me.
Last edited by WildcatFan; 05-15-2015 at 09:50 PM. Reason: Wrong word used
Not real thick, but I would look at the leather welding apron's from Harbor Freight. Some times they are on sale at ridiculously low prices.
Robert
Go to the "Vendor Sponsor" page. Go to the end and try Whyte Leatherworks. Maybe he can do something for you.
Any welders supply will have them. If your thinking about lead splash don't get one with pockets.
Who can make me a leather apron?
You want to be a leather apron?
http://www.harborfreight.com/split-l...ron-45193.html Here is what I use.
I use the HF one and it has saved my legs and lap several times!!!!!!!
Inexpensive and holds up very well. I use one for casting and another one in my wood shop.
If ya get one with pockets, just wear it wrong side out.
You could also get one of the flame retardant cloth aprons made by BSX. I used their pull on sleeves for years welding pipe, they work good and are cooler than leather and a WHOLE LOT less $$! Used their full jackets in the winter too.
http://www.grainger.com/product/BSX-...g-Apron-24K532
http://www.ebay.com/sch/i.html?_from...w=BSX&_sacat=0
Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.
I just bought a side of 8/9 oz leather which is about 3/16 inch thick. It was long enough to get one apron that could go from my neck to just below my knees and wide enough to go a ways around the hips. This is too heavy to sit down in and could be hard to bend over in. On sale, it was just a hair under $80. Cost wise you will be much better off getting an apron that was commercially made rather than having one made just for you.
BTW I also use the HF apron for casting too.
Some times it's the pot,
Some times it's the pan,
It might even be the skillet,
But, most of the time, it's the cook.
I got a farrier's apron off of Ebay that covers me to the ankles.
Forgot the name of the company.
Leadmelter
MI
Go with the HF,I use it in casting and at my forge.Leather is not cheap.
Pro Patria-Ne Desit Virtus
The HF apron (the one I use all the time) is on sale right now for $10.99. The have several grades of leather gloves.
Why pay more? At those prices I bought several for the different shops (wood, metal, casting)
banger
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |