Another one, dogdoc on old board.
Another one, dogdoc on old board.
I think I'm a little confused by different numbers I see associated with this project. Did we decide this was a .452 or a .454 as cast?
Regards,
WE
.454" as cast with straight wheelweight alloy.Originally Posted by C1PNR
I see now you typed 454423. The Lyman mold number was 452423. At one time, Lyman listed their 255 gr Keith style .45 boolit as 454424. Maybe that's where the confusion originated. We are ordering a copy of the 238 gr Keith boolit (#452423) specifying it drop out of the mold at .454" with wheelweights. (See drawing). Now I am wondering if I mis-typed it in one of the many posts I've made on the forums.Originally Posted by C1PNR
Please add me (zivendine-ok@yahoo.com) to the list. Do we get the money order made out to Lee, and is Lee going to send it directly to us??
azrednek,Originally Posted by azrednek
You are number 23. Ever so close to the magic 25! Here's how it works:
I collect the money (make them out to me) and I will send the drawing to Lee. I will also pay Lee at the appropriate time. When the molds are done they ship them all to me and I send them out to the individual buyers. I'll be making a post about it soon.
I just posted a link to this over on glocktalk and a couple of other 1911 forums hopefully that will put us over the top.
Eric
See Some of My Holster Work Here:
www.whitetigerleatherworks.com
...Please add my name to the order for the 452423 LEE mould order.
...old goat
OK folks, I think we have enough to start. Instructions are on the first post of this thread. The 3 week timer is on starting tomorrow.
Hardcast,
I just found out about this deal. Please add my name to the list for 1. Thanks,
Mack Heath
Gents,Originally Posted by Rrusse11
Sheesh, and a M1894 in the above mentioned cal/configuration just followed me home today,,,,,,, http://castboolits.gunloads.com/viewtopic.php?t=63
Boys I'm going to pull My hat out of the ring
I think the BD RCBs look more like the bullet I'm looking for
for my 45 ACP Springer. Don't plan on ever owning a 45ACP
revolver.
Sounds like you have a good design there, would like to be put down to buy one. First time here so I am not familar with process to proceed with ordering if it is still a go or I might be too late. Thank you for your time.
Cliff,Originally Posted by Cliff
Welcome to the group. Ordering instructions are on the first post of this thread. You are not too late.
................Any idea of a cutoff date on this mould order yet? I would kind of like to also get one. However I'm buying 2 of my own 6.5's, and the 311440. With a trip to AZ and back (with fuel prices, etc) I'm a bit thin and do NOT want to make a definate commitment if the time is too short.
Advise, please?
....................Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
Buckshot,Originally Posted by Buckshot
Well over 30 people have posted they want in on the buy. So far 26 have e-mailed me for the address to send payment. I have received checks for 12 molds. Counting my order and my neighbor's, that 15 molds. I am expecting a few more checks this coming week, which will be week 3 of the 3 week check mailing period. Whether we get 25 molds paid for by the end of the 3 week period, or not, remains to be seen. So as of right now, the best I can tell you is a definite maybe. As soon as we have the minimum order of 25, I suppose we will set a cutoff date. (that my best guess)
Just in case anyone missed it, the list of zip codes for payments received is on a separate thread in this forum. We are well on our way to having the 25 mold orders required to place the order.
Hardcast,
I mailed my check Friday 04/15. Should get to you early this week.
Brian
We now have 23 molds paid for, including my neighbor's and my own. Need 2 more to have our 25 orders. Does anyone else have a check on the way? 45_2.1, have you sent the drawing yet ?
My check and the drawing are coming your way.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |